|
|
| Trafag pressure transmitters are used for the electronic measurement and evaluation of pressure values. They are available in many different versions with regard to pressure and electrical connections, measurement procedures, electric output signals, and approvals (CE, Ex, Shipbuilding, Railways). Two different sensor technologies are available, namely thin-film-on-steel (weld-sealed design without O-rings) and thick-film-on-ceramic. Trafag also develops and manufactures products specifically to customer requirements. |
|
Smart pressure transmmitter model APC-2000 ALW with Hart protocol/Profibus PA.
Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gasses, vapours and liquids. Transmitters with direct or remote diaphragm seal are applicable to the measurement of the pressure and level (in open tank) of liquid. The active sensing element is a piezoresistant silicon sensor.
Transmitter can be programmed through:
- hand-held Hart communicator model KAP-03(Aplisens) or other
- PC with software Raport-01 or other
- local adjustment which allows setting of the following parameters: measuring range adjusted without pressure source, measuring range adjusted with pressure source, zeroing, measuring units, damping, type of characteristic, starting point of sqrt characteristic, display setting, factory setting.
User features:
- Piezoresistive sensor
- Measuring range: min. 0 ... 1 mbar; max. 0... 1000 bar
- Output signal: 4...20 mA, 0...20 mA, 0...5 mA + Hart, Profibus PA
- Intrinsic safety and explosion proof certificates
- Accuracy: 0,075%
- Process connection: 1/2NPT, M20 x 1,5; G 1/2";
flush diaphragm (G 1/2"; G 1"; M30 x 2); diaphragm seals; |
|
Measurement systems using Endress Hauser's process pressure and differential pressure transmitters, with long-life ceramic measuring sensors, are the highly accurate and forward-looking alternative to conventional transmitters and pressure gauges with an electric output signal.
You can choose from a practical programme of systems for almost every task that involves pressure measurement. From the single measurement point to the interactive measurement facility with a connection to supervisory automation systems, we offer you the best solution. National and international approvals (e.g. EEx, ATEX, WHG, VbF, StEx, CSA, etc.) permit our systems to be used in all areas of application.
|
|
Industrial pressure transmitter
The PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device.
Applications include general purpose industrial, refrigeration, oil & gas well head monitoring and control, compressor performance monitoring and static pressure measurements in flow applications.
Features & Benefits:
Ranges from 2.5 to 15,000 psig; 5 to 15,000 psia
±0.25% FS accuracy
Absolute and gauge format
NACE compatible with hastelloy C276 and 316L SS
Low cost, ex-stock delivery
Πmarked
UL/FM/CSA IS Class I, Div I, Groups A,B,C, and D
PTX 1240 Explosion-proof Class I, Div I
|
|
Compact and easy to integrate, the pressure transmitter GR is equipped with a ceramic cell being able to measure pressures going from -1 to 250 bar. It delivers a signal 4/20mA and is declined with cable output (IP67) or a connector DIN 43650 (IP65).
The transmitter GR type is dedicated to the integrators. The principal applications are the distribution of gas, water and the boilers industrial.
Available in version ATEX EEx ia IIC T5/T6, it can be installed indifferently in zones for gas 0,1 or 2 or zones for dust 20,21 and 22.
|
|
ST2000
ST 2000 pressure transmitters are a series of two-wire microprocessor-based, 4-20 mA instruments. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0.2 to 460 bar (3 to 6700 psi).
ST 3000 Series 100 - Absolute
Honeywell ST3000 Series 100 absolute pressure transmitters are used in applications in which high accuracy in the vacuum range of pressure is needed to include low-pressure measurement in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column.
ST 3000 Series 100 - DP
Honeywell's ST 3000 S100 differential pressure transmitter can be used with any primary flow element to provide proven, repeatable flow measurement, from furnace combustion airflow rate to hydrostatic tank gauging.
ST 3000 Series 100 Flange
Honeywell's ST 3000 Series 100 flange-mount transmitters may be installed directly onto a tank flange and are offered with a variety of tank connections to include ANSI flange and sanitary connections.
ST 3000 Series 100 Gauge
For applications requiring direct connection to processes requiring small flange, small sanitary connections or 1/2" NPT, Honeywell offers the STG14T transmitter.
ST 3000 Series 100 In-Line
ST 3000 Series 100 in-line transmitters are used in applications including high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels, and can be installed in a wide variety of hazardous environments.
ST 3000 Series 100 Remote Seals
Honeywell's ST 3000 Series 100 remote seal transmitters demonstrate proven reliability in applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids.
ST3000 Series 100 Temperature
Honeywell transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications. All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART* output, or FOUNDATIONTM Fieldbus output. When digitally integrated with Honeywell's Process Knowledge SystemTM, EXPERION PKSTM, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics.
ST 3000 Series 900 Absolute
Honeywell's ST 3000 Series 900 Absolute Pressure Transmitters bring proven smart technology to pressure measurement applications in which high accuracy in the vacuum range of pressure is needed.
ST 3000 Series 900 DP
Honeywell's ST 3000 Series 900 Differential Pressure Transmitters bring proven smart technology to a pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. It can be used with any primary flow element to provide proven, repeatable flow measurement.
ST 3000 Series 900 DP/GP
Honeywell's STD904 and STG90L transmitters are designed for applications where the highest accuracy is not required. STD904 transmitter applications include water flow for utilities. The STG90L gauge pressure transmitter is typically used for pressure in water and gas lines.
ST 3000 Series 900 Flange
Honeywell's ST 3000 Series 900 flange-mount pressure transmitters are offered with a variety of tank connections including ANSI flanges and sanitary.
ST 3000 Series 900 Flush Mount
Honeywell offers the STG93P transmitter for direct insertion in processes with the use of a 1" sleeve, welded into the process line. The primary application is pressure measurement in the head box of pulp and paper plants.
ST 3000 Series 900 Gauge
Honeywell's ST 3000 Series 900 gauge pressure transmitter applications include high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels in the petrochemical and hydrocarbon recovery industries or in any location where accuracy and reliability are crucial to safe, economical operation.
ST 3000 Series 900 Seals
Honeywell's ST 3000 Series 900 Remote Seal Transmitters are ideal for applications in which the transmitter must be mounted remotely from the process, including level measurement in pressurized vessels in the chemical and hydrocarbon processing industries, as well as flow measurement for slurries and high viscosity fluids in the chemical industry.
|
|
| With diaphragms made of stainless steel (no more sealing problems) for all applications (hydraulics, pneumatics). Up to 600 bar in reliable SUCO quality. Unbeatable price/performance ratio. |
|
The SP96 pressure transmitter is made with 316S.S. piezoresistive oil filled cells and is to be installed at the bottom of the tank. These transmitter's are made in 316 S.S. and provide a 4-20mA output signal. The SP96 is available in a great variety of pressure ranges and can also be ordered with a Zero and Span adjustment. This unit can be easily customized to handle a wide range of applications for different types of liquids, a variety of food industry applications, as well as for gases.
FEATURES
*Loop powered, 4-20mA signal output
*Measuring ranges from -14 tp 2900PSI (-1 to 200Bar)
*Absolute and gauge pressure ranges
*Low cost yet rugged and compact design- Body entirely 316 S.S.
*High accuracy, Excellent repeatability & Temperature compensated
*3A approved
For applications with aggressive mediums, the SPC98 with a ceramic sensor in an optional Hastelloy-C body is offered. |
|
- -100mbar to 2500 Bar
- 4-20mA, 0-20mA, 0-5 VDC or 0-10VDC Output Signals
- Input Voltage 24VDC
- Combined Error ±0.25 %FS , ±0.5 %FS
- Over Pressure FS %150 ( 2 times )
- Operating Temperature - 40°C +125 °C
- Electric connection M12 connector, five Pin bendix connector
HIRSCHMAN
- Process connection G1
- Cover material: 304,316 stainless steel |
|
ST2000
ST 2000 pressure transmitters are a series of two-wire microprocessor-based, 4-20 mA instruments. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0.2 to 460 bar (3 to 6700 psi).
ST 3000 Series 100 - Absolute
Honeywell ST3000 Series 100 absolute pressure transmitters are used in applications in which high accuracy in the vacuum range of pressure is needed to include low-pressure measurement in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column.
ST 3000 Series 100 - DP
Honeywell's ST 3000 S100 differential pressure transmitter can be used with any primary flow element to provide proven, repeatable flow measurement, from furnace combustion airflow rate to hydrostatic tank gauging.
ST 3000 Series 100 Flange
Honeywell's ST 3000 Series 100 flange-mount transmitters may be installed directly onto a tank flange and are offered with a variety of tank connections to include ANSI flange and sanitary connections.
ST 3000 Series 100 Gauge
For applications requiring direct connection to processes requiring small flange, small sanitary connections or 1/2" NPT, Honeywell offers the STG14T transmitter.
ST 3000 Series 100 In-Line
ST 3000 Series 100 in-line transmitters are used in applications including high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels, and can be installed in a wide variety of hazardous environments.
ST 3000 Series 100 Remote Seals
Honeywell's ST 3000 Series 100 remote seal transmitters demonstrate proven reliability in applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids.
ST3000 Series 100 Temperature
Honeywell transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications. All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART* output, or FOUNDATIONTM Fieldbus output. When digitally integrated with Honeywell's Process Knowledge SystemTM, EXPERION PKSTM, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics.
ST 3000 Series 900 Absolute
Honeywell's ST 3000 Series 900 Absolute Pressure Transmitters bring proven smart technology to pressure measurement applications in which high accuracy in the vacuum range of pressure is needed.
ST 3000 Series 900 DP
Honeywell's ST 3000 Series 900 Differential Pressure Transmitters bring proven smart technology to a pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. It can be used with any primary flow element to provide proven, repeatable flow measurement.
ST 3000 Series 900 DP/GP
Honeywell's STD904 and STG90L transmitters are designed for applications where the highest accuracy is not required. STD904 transmitter applications include water flow for utilities. The STG90L gauge pressure transmitter is typically used for pressure in water and gas lines.
ST 3000 Series 900 Flange
Honeywell's ST 3000 Series 900 flange-mount pressure transmitters are offered with a variety of tank connections including ANSI flanges and sanitary.
ST 3000 Series 900 Flush Mount
Honeywell offers the STG93P transmitter for direct insertion in processes with the use of a 1" sleeve, welded into the process line. The primary application is pressure measurement in the head box of pulp and paper plants.
ST 3000 Series 900 Gauge
Honeywell's ST 3000 Series 900 gauge pressure transmitter applications include high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels in the petrochemical and hydrocarbon recovery industries or in any location where accuracy and reliability are crucial to safe, economical operation.
ST 3000 Series 900 Seals
Honeywell's ST 3000 Series 900 Remote Seal Transmitters are ideal for applications in which the transmitter must be mounted remotely from the process, including level measurement in pressurized vessels in the chemical and hydrocarbon processing industries, as well as flow measurement for slurries and high viscosity fluids in the chemical industry.
|
|
The manufacture of pressure transmitters is the core expertise of STS Sensor Technik Sirnach AG.
* Digital pressure transmitter DTM :
- Pressure ranges from 0¡50 mbar and -1¡1000 bar available
- Accuracy pressure measurement ¡Ü 0.1%
- Interface RS485 or RS232
* Intrinsically safe pressure transmitter ATM / Ex :
- Pressure ranges from 0¡50 mbar and -1¡1000 bar available
- Approval according directive intrinsical safety II 1G EEx ia IIC T4¡T6
- Accuracy pressure measurement ¡Ü 0.1% |
|
| Scan-Sense AS has been involved in the field of pressure measurement technology for many years. Our engineering department has developed numerous pressure transmitters and transducers for our OEM customers’ specific applications. |
|
| With more than one million BARTON DPU-based instruments in service around the world today, Cameron's Measurement Systems division is a premier supplier of reliable and accurate chart recorders, indicators, switches and pneumatic controllers. Originally developed in the early 1920s, our differential pressure technology features a welded bellows assembly that increases accuracy while dramatically reducing the effects of wear. To facilitate quick and easy repairs all DPU based instruments are supported with pre-calibrated exchange or repaired sub-module bellows assemblies. |
|
| The MVX-II Multi-Variable Transmitter is a gas measurement unit built around a patented, silicon-based DPE cell. It combines the accurate and stable measurement of differential pressure, static pressure and temperature with high speed input sampling/averaging and communications capabilities. This low powered, field-hardened gas measurement transmitter features an easy-to-use laptop interface and industry standard communication protocol which makes configuration, measurement, and reporting simple, accurate, and reliable. |
|
| ... products without technical information |
| |
|
|
