|
|
All in one. 1-2 OR 3 meter long video endoscope with 3.5" Screen. Supplied with a SD Card 512 MB that allows recording of pictures or videos in full autonomy mode.
Main characteristics
- 3.5" LCD Screen
- Adjustable light intensity
- SD Card 512MB
- USB Slot - compatible USB 1.1 & 2.0
-Video out for connection to Monitor
-Easy to use 2 Push buttons record mode
-Rechargeable Battery
TECHNICAL DATA - CCD VIDEOSCOPE Working diameter 5.50 mm
Working length 1.000 - 2.000 - 3.000 mm
Outer tube PVC flexible
CAMERA
Resolution 640*480 pixels
Video signal NTSC / PAL
Frame rate 30 fps
White balance automatic
Lighting 4 white LEDs
OPTICS
Direction of vision 0°
Field of view 67°
Focale distance 15 to 100 mm
Resistant to water & fuels yes to most fuels and solvents
Bending radius 50 mm
Temperatures of use 10 to + 60°C
TECHNICAL DATA - LCD SCREEN
Screen LCD TFT 3.5"
Autonomy 4 hours run time on battery per charge
|
|
|
|
|
|
Video endoscope with LCD screen TFT 3.5’’ and articulation 2 or 4WAY. Light and portable (rechargeable battery). Allows visualization and recording of still images and videos on a SD Card. Delviered in case, it is the perfect inspection tool for all your aviation maintenance inspections.
Description Technical data
Diameters 4 & 6 mm
Working lengths 1.500 - 3.000 et 6.000 mm
Articulation Oui 2X - 110° left/right (for the 4 & 6 mm in 1.5m) 4X - 130°up/down - 110° left/right (for the 6 mm in 3&6 m)
Direction of vision 0°
Field of view 50°
Outer sheath Tungsten braid
Screen 3.5’’ TFT color (640x480 pixels)
Memory MicroSD Card 1 GB supplied (up to 2GB max)
Type of recordings Still images format JPEG Video format ASF
Video Out Video outlet- USB 1.1
Working temperatures 0° to + 60°C
Water resistant Oui - water and fuels - gasoline- jet fuels
Power supply Lithium rechargeable battery(2.5 hours)
Weight 2.5 kgs
Description Part No
Video Borescope VH4 Ø 4,0x1,5M 2X 665 001 400
Video Borescope VH6 Ø 6,0x1,5M 2X 665 001 410
Video Borescope VH6 Ø 6,0x3,0M 4X 665 001 420
Video Borescope VH6 Ø 6,0x6,0M 4X 665 001 430
Side vision tip 90° for VH6 665 001 435
|
|
The Iplex FX Introduces new levels of durability to industrial videoscopes, with its shock-resistant case design and wear resistant scope exterior. The Base unit chassis is Magnesium construction - renowned for its strength and light weight. Power is provided to the FX by an internally mounted Lithium-Ion battery which provides over 2 hours run-time. The Iplex FX complies with the internationally recognised MIL-STD 810F.
To meet the requirements for high quality true image reproduction and colour, the Iplex FX features an optimised optical system and WIDER (TM) image processing.
|
|
This Flex&Stay video endoscope combines a high resolution CCD image with an integrated 2.5" LCD Screen.
6 Strong white LEDs allow inspection in the darkest areas (sinks, engines, walls, tubes)
You can visualize live images directly on its LCD screen.
The Videoscope VP ECO 10 is totally autonomous. Works with 4 AA Batteries (supplied).
TECHNICAL DATA - CCD VIDEOSCOPE
Outer Diameter 10.0 mm
Working length 1 - 3 & 5 Meters
Outer tube PVC with form memory
CAMERA
number of pixels 320x240 pixels
Light ajustable Yes
OPTICS
Direction of vision 0° or 90°
Field of view 67°
Focale distance 50 mm to infinity
Resistant to water & fuels Yes
Bending radius 50 mm
Temperatures of use 0 to + 60°C
Screen LCD TFT 2.5"
|
|
GE Inspection Technologies brings you an array of VideoProbe® systems, a comprehensive offering of technologically advanced video borescopes that are diverse enough to meet your application-specific needs. Plug them in, turn them on—our VideoProbe systems are designed for ease of use while delivering video images of unsurpassed quality. Distinguished by an intuitive, patented joystick and one-handed operation, the VideoProbe systems feature an integrated LCD video display and a variety of imaging and measurement functions to meet your inspection needs. Engineered for durability and a vailable in many diameters and lengths, VideoProbes can be used for a wide range of industry applications.
|
|
In contrast to flexible endoscopes, images are displayed with a video chip.
The KARL STORZ VIDEOSCOPE offers maximum image quality and can be used in combination with all proven documentation units. In combination with other devices – for example with TECHNO PACK™ – endoscopic images can be easily stored, processed and displayed.
Designed for heavy-duty industrial applications, the VIDEOSCOPE is covered with a protective metal sleeve. The four-fold deflection of the distal end even permits views into inspection cavities that are difficult to access.
The VIDEOSCOPE features:
• High resolution CCD color chip
• 4-fold deflection on distal end
• 8 interchangeable lenses
• LCD color monitor detachable
• Different working lengths
• Ergonomic handle with integrated light transmission and video part
• 3 function keys directly on handel
|
|
Medigus specilaizers designing and manufacturing advanced endoscopy systems for third party companies using its proprietary technologies, such as its minitaure CCD & CMOS video cameras for endoscopy.
Medigus designs various flexible, rigid and semi-rigid endoscopes for industrial, medical and veterinarian applications. Both reusbale and single-use designs are available.
The company has a platform technology for endoscopy which includes back end units for endoscopy comprising video processor units, light sources, and insufflation/irrigation pumps.
|
|
|
|
|
|
|
The SKF Endoscope TKES 1 is a small hand-held endoscope that consists of a display unit with a built-in battery pack and a flexible water-resistant 1-metre (3.3 ft) insertion tube of just 5.5 mm (0,22 in) diameter. At the end of the cord is a miniature camera and 4 LEDs that can be easily adjusted to illuminate the subject. To enable pipe walls and similar applications to be visualised, a 90 ° side view adapter is also included. The display unit can be set to one of four languages (more languages will be added) and up to 30,000 images or 4 hours of video can be stored on the SD card. No special software is required to view the images or videos. As well as being able to download the images and videos to a MS Windows® PC using the supplied USB cable, a TV out cable is supplied allowing the images and videos to be visualised on a TV or beamer. This is a great feature for using in meetings. The built-in battery pack can be recharged using the power adapter included and all items are packed in a compact lightweight carrying case.
|
|
|
|
|
|
iRis
Intelligent Remote Inspection System
Extremely compact dimensions, minimal weight and optimal handling are the outstanding attributes of the iRis Videoscope System by IT Concepts.
- Videoscope for the mobile use
- ready for use in no time
- very compact & portable
- sturdy & reliable
- 1.5kg lightweight
- real one-handed operation
- integrated high-power LED light source
- intuitive use
- intelligent camera control
Inspections in remote or inaccessible areas of the harsh industrial environments now are feasible in no time and with an undreamed easiness. Only little efforts and iRis is ready for use within seconds. You can move the distal end to any desired position fast, easy and precisely, thanks to the approved tactile 4-way articulation of up to 180°.
Adjustable and interchangeable objectives with different fields of view, f-stops and working distances as well as the high brightness of the LED light source guarantee, that you don´t miss any detail on the 4.0" high resolution TFT display.
The integrated, changeable and rechargeable high power batteries assure 2 hours of opera-ting time. The balanced handle - designed for real one-handed operation - allows long and effortless working.
With diameters of 6.0mm or 8.0mm and lengths from 1.5m to 3.0m the iRis leaves nothing to be desired.
|
|
|
|
|
|
iCapturesmartSystem
Extremely compact in size – light weight for maximum portabi-lity. The 580g of this lightweight imaging and documentation hub is barely noticeable when climbing or walking. The iCapturesmart enables a user to carry out inspections conveniently and effortlessly in remote or inaccessible places, or in confined spaces.
iCapture smart System - here, too, the tried-and-tested iSeries Videoscope is at the heart of each top-quality, clear, true-to-life inspection image. Together with the extremely portable, ultra-compact iCapturesmart imaging and documentation hub, it forms a high-performance system that is ideally suited for use in confined spaces or especially remote or inaccessible inspection environments. Thanks to its high-quality, heavy-duty shell and sturdy aluminium profiles, the ABS plastic system carrying case is extremely hard-wearing, making it well-suited for carrying your inspection system around.
A CCD image sensor is the vital centre of the Videoscope providing unsurpassed resolution and image clarity for true-to-life images with realistic colours. The Videoscopes feature handpiece camera control electronics. This means many different videoscopes can be used with a variety of imaging and documentation hubs. With their one-handed and user-friendly operation, the Videoscopes are well suited for use in the industrial work environment.
- Working length from 1.0-15.0m
- Diameters of 4.0mm, 6.0mm and 8.0mm
- Articulation choices are 2-way and 4-way.
- Bright 4.0 inch TFT display
- On-screen menu
- On-screen text generator
- Personalised camera control
- Extensive documentation features
- smart hold holding device t
|
|
|
|
|
|
iTool System
...the intelligent inspection system
The iTool System is made up of three components: the iTool Video Imaging Hub as the ima-
ging and documentation hub; the iSeries Videoscope; and the compact Case for transportation.
- Specifically developed for industrial applications
- Compact and portable
- Entire system weighs just 4.0kg
- Dynamic 180° articulation
- Sturdy and reliable
- Easily transported
The iSeries Videoscope with CCD image sensor provides a high-quality video signal and exceptional resolution. The videoscope's precise and extreme articulation allows you to manoeuvre it into any position you need.
With its intelligent software, the iTool Video Imaging Hub visualises inspection images
on the high-resolution TFT display and saves images at the touch of a button. With the
iTool, inspection images can be precisely marked and documented.
iCase and iCaseplus are clever and compact transportation solutions.
This mobile inspection system solution is uncomplicated to set up and easy to use.
Key Facts:
• Large, bright 6.8” TFT display
• On-Screen menu
• On-screen text generator
• Personalised camera control
• Image capture with audio commentary
• State of the art documentation functions
• Integrated 24W Metal Halide Light Source
• Rechargeable powerBelt
• maxhold holding device for iTool and iSeries Videoscope
• CCD camera technology
• Convenient one-handed operation
• Image capture button on handpiece
• Working lengths from: 1.0m – 15.0m
• Diameters of: 4.0mm, 6.0mm, 8.0mm
• Articulation: 2- br 4-way
• Custom-built versions available
|
|
Our video range has been designed to respond to the needs demanded by non destructive industrial testing (CND) applications. The video systems that we offer obtain an image quality and finish which places them among the best video inspection systems on the market. Our strength is summed up in a few arguments: Quality/Price relationship, simplicity of use, compatibility with all types of video accessories and performance.
Our videoscopes are guaranteed for 1 year parts and labour. They also benefit from a reactive SAV (less than 2 weeks in the case of repairs). By their design, our systems are created to respond to a simple philosophy: Plug and Play. In fact, in a few seconds the equipment is connected and ready to use.
Choose a FORT Imaging Systems product, it guarantees a simple, quick and successful inspection.
|
|
|
ELTROTEC is a producer and supplier of opto-electronic solutions and d´image treatment of high technology for automation. We have experience of more than 30 years in the technical endoscopy for the quality assurance. Our range includes rigid, flexible, video endoscopes and compact cameras for the image processing.
|
|
|
|
|
|
Video Tube Scope
ITS-25
The maintenance professional has waited a long time for a camera with the abilities of the new Goodway Tube Scope to be offered at a reasonable price. Our wireless ITS-25 Industrial Tube Scope comes with a standard 25' long flexible probe and is available in lengths up to 100' with a camera head less than 7/16" in diameter! The probe remotely delivers a crystal clear image back to the 5.6" wireless color monitor. It is perfect for inspecting and documenting the condition of your chiller, boiler and heat exchanger tubes. Though the Goodway Industrial Tube Scope was designed with the HVAC professional in mind, there are many other uses for this unique inspection tool in and around your facility.
The ITS-25 is very easy to set up and operate. Designed to accommodate wet enviroments, the tube scope is also small enough to inspect the full length of most tubes. The probe is equipped with TEN LED lights at the camera head, with two brightness settings, to illumintae your view. The image is relayed from the transmitter, located at the base of the probe, to the wireless monitor, which can be located up to 100' feet away. Still images can be taken on demand, viewed organized and saved to the flash memory card. The images can then be transfered to a PC and viewed in large clear frames. All of this can be had at a surprisingly low cost.
|
|
NEW PROFESSIONAL CCD SONY EX-VIEW HAD SENSOR ANALOG VIDEO CAMERA
WITH f=35mm ENDOSCOPE/BORESCOPE 32mm eye-piece VIDEO COUPLER
FOR USE IN WIDE RANGE OF INDUSTRIAL APPLICATIONS
IT FEATURES 1/3" ENHANCED SUPER SENSITIVE EX-VIEW CCD SONY SENSOR
AND A LOTS OF MANUAL CONTROL ORGANS FOR CAMERA ADJUSTMENT
ACCORDING TO THE INSPECTION ENVIRONMENT!
IT CONNECTS TO ANY BORESCOPE / FIBERSCOPE
THAT CARRIES STANDARD ROUND 32 MM EYE-PIECE!
|
|
Fiberscopes and micro fiberscopes
Fiberscopes allow an introduction in the most winding systems. The image conductor comprises thousands of micro fibres and 2 articulation axes or 4 articulation axes (2 x 110°) allowing omni-directional inspection. The illumination guide is attached to the fiberscope.
|
|
|
Endoscopes form a rigid optical rod. They correspond perfectly to the applications that require an inspection in a rectilinear environment. Our endoscopes are equipped with the latest generation of optical lenses, which guarantee a high quality image. All our optical solutions are anti-glare treated to remove any phenomenon caused by excessive glare. Our boroscopes have a fibre optic illumination. We have a full range (with diameters from 1 mm to 10 mm) and separated into three categories (standard endoscope, rotating endoscopes, micro endoscopes).
|
|
|
The light sources are in fact external boxes which produce illumination intended to clarify the inspection area. These boxes allow a beam of light to pass through a fibre optic to the point to be inspected. At FORT, a full range of sources is available with different types of lamps and levels of power in order to meet the needs of a variety of working environments.
|
|
New - Video Endoscope with 2 Way Articulation and LCD Screen 3.5". High quality image at a very affordable price. Totally autonomous. The videoscope features a 1/10"CCD video camera chip, a focal range from 5-200 mm, 2 way tip articulation controlled through a circular disc on the handpiece.
An Extra Large field of view - 100°- allows a very precise and large inspection.
A SD Card reaser allows the direct recording of photos and videos
TECHNICAL DATA - CCD VIDEOSCOPE Working diameter 4.5 mm
Working length 1.5 or 3.0m mm
Outer tube Stainless steel - with plastic coated exterior
Bending radius 25 mm
Depth of field 5-200mm
Direction of vision 0°
Field of View 100°
Articulation 2 x 120°
Lighting Manually controlled LED
Video output NTSC
White balance Manual
LCD Screen 3.5" LCD TFT Color
battery Rechargeable Li-Ion battery (8 hours autonomy)
Waterproof Yes water-oil-gasoline-kerosene-motor oil
Working temperatures -20°C to +50°C
|
|
Portable video Pipe inspection (VPI) system for the industry, sewage system. Pushrod camera color
Advantages
Ø 25.4 mm CCD Camera
Waterproof to 30 meters
High resolution 5.5" LCD Screen with 1.8 meters cable.
RCA video output for connection to our Video recording unit
2 incorporated and rechargeable 12V batteries
19 or 30 meters length
Allows inspection of pipes from Ø 35 to 152 mm (200 mm with 8" centering star)
TECHNICAL DATA CAMERA HEAD Type 1/3" CMOS
Sensitivity 3 Lux
Lens f=2.5 mm, F=2.0
Field of view 120° - Extra large
Waterproof Yes - 30 meters
Dimensions Ø 25.4 mmx38.1 mm
Weight 75 gr
TECHNICAL DATA MONITOR SYSTEM Resolution 960x234 pixels
TFT Display 5.6" (142 mm) diagonally
Video out RCA / FBAS
Total Weight 7 kgs
Dimensions 510 x 430 x 170 mm
Batteries 2x 12V NiCD
Autonomy 1.5 Hours per battery
Operating temperature 0°C to +40°C
|
|
The product range from KARL STORZ includes rigid and flexible endoscopes, instruments for the entire field of human medicine. Innovative products such as a fully digital video chain and KARL STORZ AIDA™, the central image and data archiving system, make for documentation that is convenient, comprehensive and high in quality.
With the KARL STORZ OR1™ a visionary OR concept for minimally invasive surgery of the future has taken shape: it is a fully integrated OR, centrally monitored and controlled, in which surgical processes and routine work are simultaneously streamlined and simplified.
|
|
Medigus provides services to third party companies including design and manufacture of endoscopy systems using its proprietary technologies. Medigus specializes in small diameter videoscopes, which are based on the company's miniature CCD & CMOS video cameras for endoscopy.
Medigus develops advanced technology for endoscopy and has a platform technology for endoscopy which includes a video processor unit, ultrasound positioning system, illumination source and insufflation/irrigation apparatus.
|
|
|
Videoscopes, such as the Olympus IPLEX II-R system, use the very latest in optical and digital technology, and are rapidly becoming the instruments of choice for most applications. The image is obtained via precision Olympus lenses and a high resolution color CCD camera in the objective end of the instrument, ensuring the highest quality, brightest images available. Illumination is provided by an integral high-intensity light source, through a non-coherent fiber bundle to the tip of the instrument.
|
|
WOLF videoscopes - an essential component of a modular equipment concept
WOLF videoscopes - combining well with various endoscopic equipment
Advantages:
Adjustment to each particular job
Prompt and low-cost substitute after failures
Use of existing equipment
WOLF videoscopes - robust mechanical components, tried and tested a thousand times, with manual control for precise navigation "Feeling things happen"
|
|
This videoscope model is designed for aircraft, inspection of turbine, blades, pipes, etc.
The videoscope Videoscopes deliver high-resolution images rich inform and detail.
A Sony Super HAD¹ CDD² image sensor is a the vital center of the Videoscope providing unsurpassed resolution and image clarity.
The Video Imaging Hub that is included in basic set is the heart of each video scope inspection system and combines illumination, image control and management functions.
With this Video Imaging Hub images can be viewed, marked with the on screen text generator and quickly saved with ease.
Onboard digital storage media or the Video Imaging Hub USB interface can be used to transfer images to a PC.
The Video Imaging Hub has an all metal frame construction which provides the structural strength required for everyday use in the industrial work environment.
|
|
|
|
|
|
Medit Inc.'s Joystick type Video Borescope Systems are great for a
wide variety of inspections which require a small portable hand held unit
capable of capturing images and video. The narrow 6.9mm diameter is great
for industrial inspections, spark plug holes, or law enforcement inspections.
The ability to single handedly articulate the tip 4-ways through a joystick
makes a wide variety of inspections much easier to complete too.
These joystick controlled JVBS Videoscopes feature a 1/6” CCD Video
Camera chip located directly in the tip of the insertion tube providing a highresolution
image with 410,000 pixels. The live color image is displayed on a
2.4” TFT monitor, and illumination of the inspection area is completed by 3
high intensity White LED lights located around the CCD Chip. Additional
features include a stainless steel braided tip to protection of the articulating
portion, a WIDE 90 degree field of view, easy image and video capture to a
micro-SD card for Future Reference or Client Claims, a 2.0 USB connection
and RCA Video output to export the live image to a TV monitor, or
computer/ laptop.
|
|
|
Medit’s Easy-type Video Borescope Systems (EVBS) are ideal for a wide range of inspections including automotive, aviation, lock smiths, plumbing and pipes, casting and machinery, and law enforcement applications which require a live color image of the inspection area. These small videoscopes feature a 10mm diameter, with inter-changeable probe lengths, and 2 options for the portable monitor unit. Each EVBS set includes a 90o mirror tip, a magnetic tip to pick up small screws or metal shavings, a hook to collect wires, battery power for portable inspections, and a carrying case.
|
|
|
|
|
|
The revolutionary palm-sized PORTABLE FLEXIBLE VIDEO SCOPE (aka video borescope)with integrated LCD monitor, image and video capture functions is a new unit, which offers operators a video image of the inspection area. This Borescope is equipped with a powerful LED Light Source; 3.5” TFT display screen, internal CMOS camera chip in the tip and the ability to capture images and video. PORTABLE FLEXIBLE VIDEOSCOPE can perform all types of remote visual inspections, similar to any traditional industrial borescope, yet its compact size, with a diameter of only 5.5 mm, CCD on the tip technology and inter-changeable video probes, allow access to nearly any area.
* 5.5mm Outer Diameter:
The unit’s 5.5mm outer diameter can easily access small spaces including the spark plug holes of gasoline or diesel engines. The extra-wide angle camera takes pictures up to 640x480 resolution.
* Built in LED Light source with 4 super bright white lights:
With the presence of 4 extra-bright LED light sources (0~275Lux/4cm), every detail of your target will be illuminated.
* Oil and scratch resistant tempered glass not only protects the camera, but also maintains the high image resolution.
* The optimized illuminant design will spotlight every aspect of your inspections, allowing examinations of highly reflective surfaces too.
* Rapid insertion probe assembly:
Rather than one fixed Video Probe this unit allows you to easily switch one insertion tube with another. Video Probe Lengths include 1M, 1.5M, 2M, 3M 10M, and 30M. Therefore a full range of inspections is faster and easier than ever before.
* Real 3.5” TFT screen
|
|
|
|
|
|
High-quality Portable Flexible Video Borescope is supplied as a complete, fully portable system specially designed for search professionals to use in areas that are difficult to access such areas as insides of miscellaneous tubes, tanks and behind concealed panels.
This Portable Flexible Video Borescope has 6 mm (0.24") in diameter, 2 or 3 meter in length, oil/waterproof (not to be used with fuels) insertion probe, flexible polymer coated insertion probe with stainless steel reinforced articulation tip section.
The borescope has 2-way articulated tip with up to 120° left/right articulation.
A full colour 1/10" CCD video camera chip is integrated right in the tip, and the image can be viewed on the 3.5" colour LCD monitor inbuilt in the handle of the video borescope. For better convenience the live video can be output via analog RCA connection right to bigger TV screen or captured by help of optional USB capture device, letting you either record live video of the inspection or take snap shots of still images to your computer hard drive.
The video borescope is powered by inbuilt rechargable Li-Ion batteries and has integrated LED light sourcing that frees you from heavy bulky expensive light sources. Additionally, you can adjust the light source illumination, and consecutive working time is approximately 8 hours.
|
|
New type HANDHELD WIRELESS VIDEO BORESCOPE features wireless possibilities of having insertion tube separate from base unit for easier and more convenient types of remote inspections.
This particular model has 5.5mm (0.217") diameter and 2 meter (6'7") length of insertion tube, 1/10" CMOS video camera chip that is inbuilt right into the tip of the insertion probe, 3.5" LCD monitor, CD card slot for recording live video of your inspections and snapshots of still images. It has integrated 4 LED light source array right on the tip of the insertion probe, runs off the rechargable Li-Polymer battery up to 4 hours, and much more!
|
|
|
|
