|
|
These hydraulically powered self priming submersible pumps are used on jobs that require pumping high volumes of water at low to medium heads. Lake drainage, tank filling, cofferdam dewatering and flood control are just a few applications where these pumps are widely used.
Discharge Sizes 15, 20, 30, and 45 cm (6, 8, 12, & 18 inch)
Maximum head up to 18 m (60 ft)
Maximum flow up to 37,850 lpm (10,000 gpm)
Hydraulic flow required 26 to 265 lpm (7 to 70 gpm)
Maximum Hydraulic Pressure 198 Bar (2,900 psi)
|
|
This series of pumps covers an extensive performance range and can be used in a variety of applications: from pumping sewage in treatment plants and municipal applications, handling industrial effluent, process water and raw water, to applications in aqua and agriculture.
The standard version of these pumps is made in cast iron and for more demanding applications the pumps can be supplied in industrial configuration. The pumps are also available in explosion proof versions. An extensive range of hydraulic sections, including the impeller and volute, are available to handle different types of media. The capacities range up to approx. 2,700 l/s. A variety of drive units, with motor ratings up to 780 kW, are also available.
|
|
|
Low cost submersible water pump for use with sewage treatment systems, rainwater harvesters, flood recovery and emptying of swimming pools.
|
|
Characteristics
- Vertical.
- Single Suction.
- Single Stage.
- Submersible Motor.
Applications
- Water.
- Rain Water.
- Combined Sewage.
- Sea Water.
- Cooling Water.
- Sludge.
|
|
MultiCut Pumps with external adjustable cutting system
MultiCut submersible pumps are ideally suited for sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects. These pumps are ideal for mounting in remote situations, such as motorway service stations and rural communities/farms etc.
For sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects.
- Discharge branch DN 32
- Hmax = 17 m
- Qmax = 16 m3/h
|
|
|
|
|
|
Pumps submarines F range MOVED Technology
Pumps of recirculation RZP range MOVED Technology
BEACH Of USE
Flow: up to 8000 m3/h
HMT: up to 100 mCE
APPLICATIONS
Installation of raising in dry or immersed pit
Raising, evacuation or exhaustion of waste water and charged
Water treatment: at the head post raising of station, bridge desanding pool, post office all water, posts extraction of muds in excess, station of recirculation of muds, recirculation of mixed liquor, raising of muds
digested, raising of the filtrations, raising of greases...
Basins of storm, rain water stations, hydrocarbon surface waters charged...
ADVANTAGES
Broad choice of wheels: vortex, channel, dilacératrice or with propeller
Double trimmings or with cartouches offering a great facility of maintenance
Possibility of cooling of the engines by oil bath for operation pumped out uninterrupted
Exit attaches standardized for adaptation on existing foot of base
Pump housing out of cast iron high-quality, high-output wheels
Tight entry of cable, assembled with a cable resistant to heavy loads
Room on terminals isolated against the pressure and the entries from water in winding
Ring hard material wear, it protects the pump housing and the wheel from the first aggressions
OPTIONS
Engine ATEX on request
Coating CERAM patented C0 MOVED Technology against abrasion and corrosion (ceramic coating without solvent, thickness 400µm with 3mm, adhesion 15N/mm ²)
Mechanical Ganiture in cartridge
Head of emulsion in Abrasit for the sand effluents charged
|
|
Electric submersible pump for clear and contaminated water with a wide range of applications wherever water has to be moved.
It is ideally suitable for many operations at farms, homes and gardens. Filling and emptying of pools and tanks, pumping out flooded basements and boats, irrigation and flushing or in permanent installations as a sump pump.
Built-in hand-auto switch to choose between level control or continuous operation.
|
|
ELECTRIC SUBMERSIBLE PUMP SM-VXC SERIES
Submersible pumps SM-VXC series in cast iron, particularly robust and reliable, intended for continuous heavy duty use in fixed installations, in building services and industry, recommended for sewage and waste water of all types with solid impurities
|
|
Features
* Non-clog two vane or single vane enclosed impeller
* Permissible solid size up to 85 mm
* Gland packed / Mechanical seal
* 50 HZ / 60 HZ availability
Applications
* Effluents
* Waste water
* Storm water
* Raw sewage
Range
* Delivery size up to 200 mm
* Capacity up to 750 m³ /hr
* Head up to 48 metres
* Temperature (-) 10 degree C to 90 degree C
|
|
The CP 10 and CP 20 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8' (22 mm) from base.
* Single-stage centrifugal units driven by powerful vane motors
* Double seals protect bearings and motor from water and mud
* Integral oiler provides continuous lubrication
* Integral strainer, air inlet valve
* Bronze impeller
* Cast-iron housing
|
|
One of the main characteristics of FAGGIOLATI PUMPS is the high flexible production, that allows the realization of customised machines made according to customer’s requirements.
Nearby the standard production – our General Catalogue boasts more than 200 standard products – we realize special machines to meet the particular requirements of customers regarding hydraulic, metallurgy and power supply.
|
|
Submersible Pumps for dirty water
Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres, delivery up to 425 l/min (25,2 m3/h). Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power. Motor cooled by pumped liquid diffuser plate coated with Polyurethane for maximum resistance to abrasion compact and lightweight
Applications
- Draining of cellars, garages, basements.
- Draining of construction sites.
- Emptying of tanks and reservoirs.
- Lawn and garden irrigation.
- Fountains.
- Pumping of domestic wastewater (washing machines, showers, Sinks).
- Emptying of tanks in industrial and ecological Applications.
Specifications
- Liquid temperature up to 50°C.
- Open impeller.
- Minimum level of pumped liquid: 25 mm.
- Suspended solids handled up to 8 mm.
- Maximum immersion depth: 7m.
- 10 meters of HO7RN-F type neoprene power cord.
- Dry motor (class F insulation).
- IP 68 protection.
|
|
Features and Benefits
Silicon bronze, multi-vane semi-open impeller with pump-out vanes for mechanical seal protection.
Heavy duty cast iron, volute type casing for maximum efficiency.
Dual Mechanical Seals
Optional Seal Sensor Cord located in oil-filled chamber.
Stainless Steel Shaft and Fasteners
Applications
Designed for high head sewage applications where a gravity system is not practical.
Ideal for pressure sewage systems.
|
|
LB Series
Submersible Effluent, Vortex, Non-Clog & Cutter Pump
A very complete series of submersibile pump have been developed to meet your various requirements. In general, you are suggested to use LB series as drainage pump for liquid effluent pumping applications, LBV series as vortex pump for raw sewage applications and LBC series as cutter pump to chop the solids in wastewater.
|
|
Operating Limits:
-Fluid temperature up to 35°C
-Maximum ambient temperature: 40°C
-Maximum immersion depth: 7metres
-Maximum grain size:5mm
Motor:
-Build-in overload motor protector with automatic reset
-Insulation Class B/F
-Protection IP68
Materials:
-Pump body: Glass filled technopolymer
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
Application:
·Hand-carry submersible automatic water pumps.
·Able to drain infiltrating water, cellars or reservoirs, clean or slightly dirty water and for garden irrigation.
|
|
|
The pumps are employed for public water applications, water control at construction sites and in mines, and fountains. Our range of submersible pumps handles bore hole sizes from 8” to 12”, capacities up to 580 m3/h and heads up to 450 m.
|
|
These submersible centrifugal vortex type pumps are made, from top to toe in stainless steel and can handle a pH range of 2 – 14. In other words they are dedicated to handle corrosive media. Designed to work in demanding environments, pumping corrosive liquids and sludge’s as well as larger solids. The risk for clogging is very low due to the vortex technique. Typical applications include: Sewage and wastewater pumping, Industrial effluent handling, Chemical industry, Food processing, Textile industry and Tunnelling.
The performance range up to 57m in head and 60l/s in flow.
The pumps can be permanently installed on discharge with guide bars or as free standing for hose or pipe fitting
|
|
|
|
|
|
Slurry removal is an essential part of day-to-day
operations in a wide range of industries, such as
mining, ore dressing, sand contracting, ash handling
and steel milling.
The applications in these industries make heavy
demands on the slurry pumps, particularly in terms of
the costs incurred when it comes to wear and tear,
repairs and maintenance.
In this series of pumps the wet end, indeed all wear
parts, are made of hardened high-chrome cast iron,
which provides complete wear protection. The highchrome
impeller, incorporates a swept-back design for
sustained high efficiency and clog-free performance in
the most severe applications.
The drive unit can be easily detached from the wet
end for fast access to wear parts. And there is no
need to replace the entire wet end because the split
casing design enables the volute lining to be easily
accessed and replaced.
Flygt is the only manufacturer that offers its customers
a total solution for slurry handling. The pumps can be
supplied with an agitator and/or a mixer for a cleaner
sump. Optional internal cooling allows pumping down
to low levels, avoiding sediment build-up – we call it
Clean Sump Technology.
Slurry pumps have capacities of up to 350 l/s and
pump heads up to 100 metres.
|
|
The US 75 - 155 series submersible drainage pumps are used for all applications where particularly dirty wastewater with large particle sizes of up to 50 mm need to be pumped. These pumps, with a free passage of 50 mm, pump solids and fibres quickly, reliably and, most importantly, without blockages
- 50 mm free passage
- discharge branch 2"
- Hmax = 13 m
- Qmax = 32 m3/h
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
