|
|
By vibratory feeders (bowl feeders) the products are isolated and counted by a through beam sensor.
Each counting device is equipped with a collecting
flap. When using more counting devices (counting plant)
each device is able to start the next counting cycle immediately when released the preceding cycle and need not wait until the last counting device has finished its counting cycle.
Bowl feeders and hoppers are in several sizes available.
The noise control lining of the devices guarantees a clear reduction of the sound emission.
The counting plants are applicable for our packaging machines or also as stand alone devices. |
|
The group of weighing and automatic labelling at Gemini high speed functions under a professional computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com |
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under professional films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a professional keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a professional printer P950 or P970
Of a key USB 64 Mo
Of CD creation of industrial labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
VS-120 C/P road weighbridge
The VS-120 C/P is a pit mounted road weighbridge with a fully reinforced concrete platform. It provides an ideal, economical solution for permanent weighbridge applications.
Weighing capacity: 40 to 80t
Platform size: 8x3m to 18x3m
Pit mounted installation
Platform is supplied as a prefabricated concrete module
Foundation pit is constructed in-situ or supplied as prefabricated concrete modules
|
|
- The cell is manufactured in aluminium alloy with HT steel bushes.
- The cell incorporates an eight gauge bridge together with
associated electronics and a 9 volt PP3 non-rechargeable battery.
- Built into the suppliers of load cell is a large [20mm] 3.5 digit liquid industrial crystal
display mounted on the front of the cell for easy reading from
the operator's position.
- The load cell is self contained and has no external cabling.
- A battery professional switch is provided on the rear of the cell to prolong
battery life when the cell is out of use.
- All set up and calibration data is retained when switched off.
- The cell is automatically switched off after 15 minutes to
prolong battery life.
- Battery life - typically 50 hours. |
|
- Handheld Readouts.
- Made from a Lightweight Aerospace Alloy.
- Available Hermetically sealed for use in wet conditions.
- Tare, Peak and Reset facility.
- Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
- All units are calibrated to comply with ISO 7500-1: 2004.
- The accuracy of the cells are better than 1% of applied load.
- The power source is a 9V PP3 battery, can be supplied for
mains power if required (240v).
- 12 Month Guarantee, subject to conditions.
- Complete with carry case. |
|
| ... products without technical information |
| |
RAVAS supplies a complete range of professional scales for mounting on manufacturers of forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil industrial pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a cock block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
| The truck mounted weighing system enables you to weigh goods on site. This not only saves time but also eliminates the risk of damage during transport to a fixed balance platform. The system has been specifically designed to check the weight of incoming, outgoing goods, quantity, count components and for dosing purposes. |
|
RAVAS supplies a complete range of professional scales for mounting on manufacturers of forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil industrial pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a cock block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
| The truck mounted weighing system enables you to weigh goods on site. This not only saves time but also eliminates the risk of damage during transport to a fixed balance platform. The system has been specifically designed to check the weight of incoming, outgoing goods, quantity, count components and for dosing purposes. |
|
Features:
Multifunction and modular:
- Automatic professional wheel balancing on 1 or 2 planes.
- Manual pre-balance of wheel.
- Detection of the touch between wheel-workpiece and wheel-dresser.
- Pre, in and post-process size measurement.
Menu programmable.
Operator panel:
- Local or remote graphic display, equipped with RS232 interface for hard copy function.
- INDUSTRIAL HMI Windows professional software package for PC-CNC terminal.
Interfaces:
- RS 232 serial interface for remote programming and data up/download.
- Programmable parallel interface for remote programming, data up/download and digital I/O expansion.
- Profibus DP
- Analogue interfaces for measurement signals.
Opto-insulated and protected digital interface
Analogue signals galvanically insulated
FFT vibrations analysis.
Programmable measurement data acquisitions and recording.
Advantages:
Meets all the applications suitable to:
-increase productivity
-ensure product quality
Protection of the investment.
Cost/performing in any application.
Easy integration in any production architecture.
Remote Assistance through tele-service.
Reliable in workshops.
Reduction of machine downtime thanks to failure prevention and diagnostic.
Allows Statistical Process control. |
|
Features:
Available in the following versions:
- Rack, half rack
- Shelf
- Remote panel
Digital I/O for the connection to the CNC
Unbalance measuring range from 0 to 200 µm
Maximum resolution 0.001 µm
2 balancing limits, each settable from 0.001 to 1 µm
Panel with waterproof professional keyboard.
Suitable for internal or external balancers with professional brush or no-contact collectors.
Advantages:
Price competitiveness.
Reliable in workshops.
Enhance the quality of the product.
Increase the productivity.
Suitable as a standalone unit or integrated in the CNC of the grinding device. |
|
Features
- One or two planes balancing procedures developed according to the specifications of the toolholders suppliers.
- Balancing tolerances in accordance with the ISO 1940 specifications. - ISO Quality Grades: G1, G2.5, G6.3, and G16.
- User friendly PC-based operator’s graphic interface.
- Geometric and mass data of the toolholders inputted by the operator or self-acquired by the unit in learning mode.
Benefits
- Faster cutting speed for tools.
- Extended tool life.
- Prevention of suppliers of spindle failure.
- Consistent production quality.
- Safe and silent operation.
- Easy integration in any networked productive architecture. |
|
Features:
- Suitable for ISO, HSK, CAT, BT cones.
- Resolution: 0.1 g·mm
- Selection of the ISO balancing class together with the maximum permitted RPM
- User-friendly, step by step driven unbalance procedure.
- Rugged, ease to install and to use
Advantages:
- High Speed Machining (HSC)
- Better surface finishing.
- Longer life of the professional spindle and manufacturer of bearings of the spindle.
- Safe and silent operation.
- Wear and breakage prevention |
|
Features:
Compact dimensions
High measuring precision.
High balancing precision.
Quick return of investment
Easy to use.
Advantages:
Highly skilled operator not required.
Quick return on investment.
High level of reliability.
|
|
| ... products without technical information |
| |
PneumaticScaleAngelus has a diverse selection of pre-owned filling technologies. Our Pneumaflow and Easi-Flow are ideal for constant level fills while the Accuflow Positive Displacement and Pfaudler Rotary Piston fillers are perfect solutions for volumetric fills. The Liquid and Dry Net Weigh fillers are for those customers who value the highest level of accuracy with minimal product loss. The Mateer Auger fillers are well suited for dry filling applications.
-Widest variety of technology
-Fill speeds and accuracies verified in test lab
-Close-coupling to PSC capper available
-Reliable, minimal-maintenance and highly versatile filling solutions from the industry leader in packaging automation
-Superior customer service and technical support |
|
| ... products without technical information |
| |
|
|
see the results for the following category
