Draw wire position sensor
250 mm - 8 m, IP64 | HPS series
ELAP
Stout, easy to install, highly protected against environmental agents: ELAP linear wire potentiometers series HPS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 8 metres.
The series HPS, with potentiometer output, is supplied with strokes ranging from 250 to 8000 mm, ±0.02% linearity, 5 KOhm resistance and infinite resolution. The type HPS-MA provides 4-20 mA output signal.
The types HPS-S, HPS-M and HPS-L differ for mechanical size and measuring stroke.
Series HPS-S: 250, 500, 1000 mm
Series HPS-M: 500, 750, 1000, 1250, 1500, 2000, 3000, 4000 mm
Series HPS-L: 3000, 4000, 5000, 6000, 8000 mm
Technical specifications
* Resistance 5 KOhm ±5%
* Linearity ±0.25%
* Travel speed: 0.5/1 m/sec.
* Starting torque on spring: Strokes up to 1250 mm = 600 g
Strokes from 1.5 to 4 m = 1000 g
Over: 2200 g
* SUS304 Stainless steel wire with nylon coating - 0.6/1 mm
Breaking load 16/60 Kg. (see table)
* Operating temperature 10°C ÷ 70°C% - Relative moisture: 35%-90%
* Connection: cable 1 m long
* Protection degree IP64 (type HPS-S: IP50)
The series HPS, with potentiometer output, is supplied with strokes ranging from 250 to 8000 mm, ±0.02% linearity, 5 KOhm resistance and infinite resolution. The type HPS-MA provides 4-20 mA output signal.
The types HPS-S, HPS-M and HPS-L differ for mechanical size and measuring stroke.
Series HPS-S: 250, 500, 1000 mm
Series HPS-M: 500, 750, 1000, 1250, 1500, 2000, 3000, 4000 mm
Series HPS-L: 3000, 4000, 5000, 6000, 8000 mm
Technical specifications
* Resistance 5 KOhm ±5%
* Linearity ±0.25%
* Travel speed: 0.5/1 m/sec.
* Starting torque on spring: Strokes up to 1250 mm = 600 g
Strokes from 1.5 to 4 m = 1000 g
Over: 2200 g
* SUS304 Stainless steel wire with nylon coating - 0.6/1 mm
Breaking load 16/60 Kg. (see table)
* Operating temperature 10°C ÷ 70°C% - Relative moisture: 35%-90%
* Connection: cable 1 m long
* Protection degree IP64 (type HPS-S: IP50)
