Vertical prop Triplex series

heavy-duty

The TRIPLEX series of heavy duty braces from MEVA is ideally used for formwork alignments that are higher than 6 meters. It employs braces that are 100, 200, or 300 centimeters. It also comes with spindles, couplings, flange screws, and foot plates. The TRIPLEX SB comes along for supplementary support that is needed by one-sided walls that are higher than 6 meters.Triplex is the modular, heavy-duty bracing system for high wall and column formwork as well as horizontal and vertical support applications. Modules are easily assembled to the required length on site. The support frames and brace brackets are mainly used when working up against existing structures such as walls or rock faces where it is only possible to work from one side. The fresh-concrete pressure is transferred to the support frame via the formwork and then into the foundations. Triplex is available in two versions: Triplex R For use as a push-pull prop. The prop is simply connected by a formwork-prop connector for wall and column formwork up to 16m. Triplex SB For efficient bracing of the STB support frame up to 13.5m. Supportive Handles large loads in restricted spaces Intelligent MEVA product design Standard components are intermediate pieces of 300cm, 200cm, 100cm and 50cm as well as top units with spindles The right-hand and left-hand threads of the top units allow for a precise adjustment Triplex R attaches to the formwork with a connector and is provided with a foot plate to be anchored to the floor slab Triplex SB has wider tubes, for additional load transfer for single sided walls higher than 6m