DC AC-DC converter HPHA1

three-phasesingle-phase

PICO's HPHA1 is the perfect front end for your universal AC for your single phase or 3 phase input / DC output applications. The standard 2.5" x 4.6" x 0.5" footprint is one of the smallest on the market today in this power range. Providing a 365V regulated DC output, it can be used as a front end for PICO's FD/MD/LFD/LMD/LPD/PD and HPD series of DC-DC converters which can provide from 3.3V to 300V DC. Also, many laser and motor applications are able to use the HPHA1's 365V DC output directly. For different output voltages, and for Special 2000 Watt Models, please consult factory. HIGHLIGHTS OF FEATURES: Meets EN/IEC 61000-3-2 Requirements Universal Input Voltage (47 to 440Hz) (85 to 250V AC) or 208V AC ±20%. Line-To-Line Three Phase Input Standard Power Factor: 0.99 (from 50% to 100% FL) Synchronizing Pin: For systems needing synchronization, a 100 KHz synchronizing signal is available. Enable Pin: For preventing your Pico DC-DC Converter from turning on until the output of the HPHA1 is within acceptable limits. Connected directly to the Shut Down Pin of PICO's LP/P/HP DC-DC modules, the enable pin will keep the DC-DC module off until the HPHA1's output is within acceptable limits. If the DC-DC module is supplying heavy loads, this means this won't allow the DC-DC Converter to turn on at <300 volts input, where the HPHA1 would have to supply current of I=Power/Vout. Efficiency: 90% or better (95% minimum from 170 to 250V AC or for three phase input)