-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Other hydraulic cylinders
Other hydraulic cylinders
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

HYDRAULIC CAM SYSTEM (FLEX CAM) Our hydraulic Flex Cam System is suitable for all applications where conventional tool slides are limited with regards to the working angle. Forming and punching processes are possible against the relative ...

Stroke : 6,000 mm
Speed: 0.04 m/s - 0.31 m/s
• - Rexroth standard • - Series H1 • - Component series 3X • - Nominal pressure 250 bar • - Piston Ø 40 … 320 mm • - Piston rod Ø 22 … 220 mm • - Stroke length up to 6000 mm Features • - 6 types of mounting • - Self-adjusting ...
Bosch Rexroth - Industrial Hydraulics

Force: 1.45 kN - 256.25 kN
Torque: 180 Nm - 250,000 Nm
Rotary actuator SM4 extremely powerful and scalable Advantages at a glance •operating pressure up to 250 bar •compact und robust •wear resistant •efficient end cushioning •adjustable drive shaft datum •angle adjustment ± 5° The ...
Eckart

Force: 0.25 kN - 17.66 kN
Torque: 74 Nm - 2,450 Nm
Rotary actuator E1 setting the standard for low-pressure hydraulic systems Advantages at a glance •operating pressure up to100 bar •smallest installation dimensions •ultracompact and robust •wear resistant •effective end cushioning •adjustable ...
Eckart

Torque: 50 Nm - 3,600 Nm
Rotary actuator E3 effortless and duarble Advantages at a glance •ultra compact •robust construction •high bearing charge •double shaft-and piston-sealing (lip seal) •exact, almost free from backlash positioning •wear resistant •continuous ...
Eckart

Stroke : 8 mm - 10 mm
Force: 8.5 kN - 40 kN
B1.372 Low-block clamping cylinders B1.372 Low-block clamping cylinders single acting with spring return max. operating pressure 500 bar max. clamping force: 8.5 .. 40 kN stroke: 8 .. 10 mm
Römheld GmbH Friedrichshütte

Stroke : 60 mm - 1,200 mm
Force: 9.8 kN - 100.5 kN
Speed: 0.25 m/s - 0.5 m/s
Hydro-Cylinder Advantages ● Adjustable stroke end cushioning as an option ● Max. piston speed 0.5 m/s ● Low wear and friction Glydring seals ● High service life due to the use of guide rings at the piston and the piston rod ● ...
Römheld GmbH Friedrichshütte

Stroke : 20 mm - 50 mm
Force: 3.7 kN - 39 kN
B1.310 Universal clamping cylinder B1.310 Universal clamping cylinder single acting with spring return max. operating pressure 200 / 500 bar piston diameter: 10 .. 50 mm rod diameter: 6 .. 32 mm stroke: 20 .. 50 mm max. push ...
Römheld GmbH Friedrichshütte

Stroke : 50 mm - 250 mm
• Cylinders designed for heavy lifting, to support and hold bridges, viaducts and heavy structural steelwork. • Hydraulic cylinders with gravity return, max pressure 700 bar • The end-stroke ring guarantees maximum operator safety, ...

– Special hydraulic cylinders with with stainless steel exsecution high pressure – 700 bar – High pressure lifting cylinders with non-standard stoke and tonnages – High temperature resistant hydraulic cylinders made with Viton seals ...

Digital servo actuators, which are manufactured by Atos, are electro-hydraulic components that operate together with position closed-loop, and as well as an optional function of controlling the speed, force, and pressure. They are suitable ...

Force: 4 kN - 10 kN
Centring clamp MINI with two clamping points Double-acting, max. operating pressure 250 bar, min. operating pressure 10 bar. Design: Double-acting centring clamp with two clamping points. All components from high-grade hardened ...

Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 30 Nm
Design: Body made from steel, tempered and burnished. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Oil supply via threaded connection or oil channel in the fixture body. Application: The ...

Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 80 Nm
Design: Body made from steel, tempered and burnished. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Oil supply via oil channel in fixture body. Application: The support ...

1674 / 5000 Risultati della traduzione CAB TILTING SYSTEM E-CAB Integrated electro-hydraulic pump and cylinder, electrically operated, for cab tilting systems, IVECO, double effect Series: IVECO Product line: electric pumps, ...

Stroke : 107.5 mm - 185 mm
Double-acting cylinders with rod. Possibility of having hardware with spherical or conical pin; elettroricalcati stems, hardened and chrome-plated rod extruded cold. Cylinders extremely versatile and economical, easy to apply, suitable ...

Stroke : 4 mm - 8 mm
Force: 3.1 kN - 40.2 kN
Threaded body cylinders, with stroke limiter These threaded body cylinders are a space saving solution as clamping and lock cylinders. Suitable as a construction module for a wide variety of tasks. This cylinder is for example also ...
HYDROKOMP

The CLKA series is composed of clamping hydraulic cylinders developed by Clamptek Enterprise Co., Ltd.. They are equipped with cylinder bores in a diameter that ranges from Φ22 up to Φ80 and in a pressure of at most 7 Mpa. The cylinders ...

The CLFH connecting rod can work with a maximum pressure of 7 Mpa. During the termination holding state the clamping arm of the rod can be positioned lower than the holding position. This can also decrease the interference and loading ...

Stroke : 10 mm - 100 mm
Force: 3 kN - 130 kN
Single or double acting, the linear cylinder is mainly used for holding a workpiece against its isostatic references before sarting the clamping process. This range can also be used for internal movements in plastic injection molds. There ...
QUIRI

Stroke : 20 mm - 1,000 mm
Force: 5 kN - 10 kN
Quiri Hydrosystems presents standard HIFI range with more than 400 models of high performance actuators. They have been developed for servo-hydraulic controlled applications. Linear actuators include HIFI-J composite bearings actuators, ...
QUIRI

Stroke : 200 mm - 600 mm
Force: 10 kN - 800 kN
HiFi aero actuators are ultra low friction actuators, especially dedicated to aeronautic structural tests. Availaible in single or double ended rod, long stroke. HIFI aero ST singled ended rod Ultra low friction Structural static tests Force: ...
QUIRI

Stroke : 20 mm - 260 mm
Force: 1.5 kN - 200 kN
Speed: 2 mm/s - 40 mm/s
The Reineke RKA electro hydraulic actuator is a self contained actuators type. All relevant components as motor-pump unit, piston, servo valve or proportional control valve and mechanical feedback are mounted inside the container. All ...
Reineke

Stroke : 0.22 in
Versatile threaded body cylinders can be used for a variety of high production applications such as workpiece positioning, locating, clamping, ejecting and punching. single and double acting versions are available Stainless steel ...

Tube I.D.:φ32, φ40(mm), The body is manufactured in anodized aluminium alloy, and has been designed looking at the harmonious aesthetic development. The body is manufactured in anodized aluminium alloy, and has been designed looking ...
Mindman Industrial

Series HT Series Bore Size (Inch) 1½" – 12" Bore Size (mm) 40 - 320 Maximum Pressure (psi) 2350 Maximum Pressure (bar) 160 Features Confirms to ISO:6020 Part II/III Choice of 18 Mounting Styles Compact Tie-Rod Design Piston ...

Stroke : 50 mm - 400 mm
Force: 670 daN - 98,500 daN
Overall Stroke 50 to 400 mm Power Stroke 6 to 60 mm Power 0.6 to 100 t Operating Pressure 2 to 10 bar. Full power at 6 or 10 bar operating pressure

Uhing®-linear drive nuts (linear actuators) are non-positive drives which convert the rotation of a plain round shaft into a traversing movement. This effect is achieved by using rolling rings that are mounted on roller bearings and ...

Stroke : 300, 80 mm
These are cylinders with compact design and can have integrated magnetic switches with end strokes attached on them. They complement V250CE in the case of strokes that are higher than - 50 mm. These models can permit highest level of ...
VEGA SRL

Stroke : 184 mm - 450 mm
Force: 614 kN - 1,005 kN
LUKAS Hydraulik GmbH

Compact Hydraulic Cylinder Maximum operating pressure 500 bar Primarily used for mold construction Piston diameters from Ø16 mm to Ø200 mm Several piston diameters with standard strokes in stock Multiple mounting ...
AHP Merkle

Stroke : 10 mm - 18 mm
Force: 745 kgf - 2,364 kgf
Available in 6, 8, and 10 inch diameter models 1.355" (34.4mm) through hole standard Speeds to 6,000 rpm Clamping Force up to 5,200 lbs (2,360 kg) LDN Air Cylinder Design & Features MicroCentric LDN Air Cylinders feature a high performance ...
Microcentric

Stroke : 2 in - 7.8 in
These actuators are electro-hydraulic devices which combine all the basic elements of a hydraulic system into one integral unit, consisting of an electric motor driving a hydraulic pump, piping, working cylinder and piston. The function ...

Stroke : 10,000 mm
Force: 10,000 kN
Differential cylinder for large excavator •Load: 1,000 t •Stroke: up to 10,000 mm •Operating pressure: 350 bar •Working life / weight optimisation •With internal end-position damping and integrated measurement system
Montanhydraulik

Designed and used for indirect roped lift applications, the piston 1008 SL can be used for travelling heights up to 18 meters. New processing technologies developed pistons with a reduced diameter of the cylinder, which requires a lower ...
GMV

Torque: 2,500 Nm
COMPACT HYDRAULIC ACTUATORS SINGLE & DOUBLE ACTING ProControl SHS-K & SHD-K series actuators are similar to the SPS-K & SPD-K range. Many components are interchangeable, such as the centre housing, yokes, guide block; the only major ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please specify:
Help us improve:
remaining