Air filtration accessories: frames, housings, cartridges, etc.

AFC-SC Central Vacuum Cyclonic Pre-Filter is an in line pre-filter that can be placed in any central conveying system. Pre-filters must always be used in conjunction with a central filter. It is designed to extend the life and efficiency of your vacuum ...

Safety filters are installed in systems between the existing filter and the blowers or compressors. Filter cartridges serve as filter elements. Since safety filters only come into effect as backup in case of damage or malfunction of the main filter, cleaning ...

... The CARBOTECH™ container, compatible with SIEBEC L, S and P SERIES filters, captures organic pollution (brighteners,etc) from copper and nickel baths, reduces soluble pollution on effluent... Features Carbon available in powder or granules, with a ...

... High quality raw material control, imported membrane sheet, filter screen, glue and Y-ring, all NSF certificated. All testing meet NSF 58 requirements. The maximum effective membrane sheet area bring high flow rate. High salt rejection stability ...

... LyPore® Defender microglass filtration media is Lydall’s newest liquid media series. Extensive R&D coupled with industry leading expertise in wet-laid microglass media results in a series of products that truly push the boundaries of dirt ...

The new EN779:2012 has ensured further development of many bag fi lter products. AFPRO Filters has made sure that all its bag filters comply with the new EN 779:2012 by improving the fi lter medium. Because AFPRO Filters makes a large proportion of the ...

Removal rating: 20 nm

Aquaflex modules are based on hydrophilic hollow-fiber ultrafiltration membranes, composed of a PES/PVP blend. The membranes, which are operated in a dead-end mode, have high mechanical and chemical strength, making them suitable for a wide range of applications. ...

... – Filter surface area: 3200 cm² – Material: Polyester – Dust retention: 99.8 % Pleated filter cartridge for vacuuming household and industrial dust, sawdust, wood shavings, masonry, drilling and milling dust and comparable materials. Only for GS ...

Operating pressure: 0 bar - 4 bar

... Full PTFE housing top Maximum chemical resistance, for use in highly aggressive mediums Filter fineness of 2 μm or 25 μm with sintered PTFE elements No absorption of trace gasses Quick response time in systems due to low dead volume Variable wall ...

Removal rating: 0.5 µm - 20 µm

PorSEP Series Filter Cartridge is sintered by super fine metallic powders. Its filtration rating ranges from 0.5μm to 20μ. It has uniform pore size, high porosity and heavy duty. Thus it is particularly suitable for application of high temperature, strong ...

... Media Glassfiber Frame Galvanized Steel Final Pressure Drop 450 Pa Operating Temperature 80°C Filter Efficiency* M5-M6-F7-F8 Filter Class** ISO ePM10 / ISO ePM1 Media Color M5: White / M6: Green / F7: Pink F8: Yellow Fiber Assembly Type Sewn Applications • ...

Removal rating: 30, 60 µm

... Filter cartridges Filter cartridges are used, for example, for cleaning and regenerating cutting oils for machine tools. These filter cartridges, which work on the principle of pre-coat filtration, enable a high throughput in the smallest possible ...

... Quincy’s Standard Filtration lineup consists of the three most common types of filters used in compressed air systems: Particulate, Coalescer and Absorber. Aluminum housings with threaded NPT connections are used for flows up to 1530 cfm and steel ...

Distributors of filter bags and sleeves of excellent quality that guarantee absolute watertightness, high efficiency in particle retention and the obtaining of pure end products thanks to the high quality fabrics used and the finishes by heat sealing, ...

Removal rating: 0.1 µm - 150 µm
Flow rate: 0 m³/h - 113 m³/h

... Overview
A complete range of process water cartridges and air filtration elements engineered for European industrial facilities. From RO pre-filtration and power plant condensate to pharmaceutical-grade membrane cartridges and heavy-duty dust ...

Removal rating: 0.1 µm - 500 µm

... Product description
Filter cartridges in various materials for industrial and commercial applications. Available as disposable or washable elements, with plastic or stainless steel housings. Filtration range from 0.1 to 500 microns.

Available ...

Suction Inter-Stage Fuel Gas Scrubbers are used to protect gas compressors from fine particulate and condensate. Without proper filtration, compressor performance is reduced. We customize our solutions to match your specific conditions. Solberg provides ...

... Installation
Product can be installed in any position.

Applications
Used where fluid filtration or control of flow direction (or both) is required.

Physical specifications

• Body: PA66 GF30%
• Gaskets:

... Product Application This herbal extraction and concentration machine is used to doing concentrate for extract liquid, Chinese medicine, plant, animal, foodstuff and chemical material. Especially suitable for small or medium sized pharmaceutical factory, ...

Flow rate: 100 m³/h - 3,000 m³/h

KAF Duct housing foreseen for installation in rectangular ventilation duct systems. The unit is installed in systems supplying air to aseptic rooms such as operating rooms, laboratories, advanced electronics or optics manufacturing facilities, etc. KAF ...

... Air from the cold chamber is drawn in by one of the two fans. The ethylene contained is burnt in the central part (catalytic layer heated to 230° – 260°C) by an electric resistance. The air is then cooled by passing through a heat exchanger and is released ...

Removal rating: 0.5 µm - 10 µm

... The Dust Filter Cartridge is a high-performance filtration component designed to capture dust, particles, and other airborne pollutants in industrial air filtration systems. Constructed from durable materials such as polyester, polypropylene, or fiberglass, ...

Introducing our entry-level 10L HTE fully automated cannabis Aerosol Extraction equipment, a cutting-edge solution for cannabis extraction. Using natural R134A solvent, this system preserves essential plant compounds at room temperature and low pressure. ...

... ● High efficiency and Easy change-out reduces down time ● Melt blown structure ● Long service life ● Ideal for food,beverage ,water ,oil ,milk application ●filtration precision scope from 1-300 micron ...

... Drytec Air Filters are the first line of defence for any air compressor and have a significant impact on the service life of the compressor, lubricant, air/oil separators and oil filters. Drytec offers the highest efficiency air intake filters in the ...

Filter cartridges are the ideal solution for dry dust filtration in dust-removal systems. Washable and reusable in most applications, filter cartridges have a larger filter surface area than conventional bag filters and more efficient particle removal ...

... Exhaust walls are dry filtration systems, often installed inside booths, designed to capture airborne contaminants (dusts, smokes, fumes or gases), released by the processing of large surfaces, which could be inhaled by the operators, causing respiratory ...

... Many industrial processes and machines require filtration, either to protect downstream equipment or to separate unwanted particles from a fluid. These filters can take a wide variety of shapes and sizes, require different filtration thresholds and ...

... GH 3 Gatti filter cartridges have a filtration rating of 3 microns. This means that all solid particles above 3 microns are retained in one operation. These filters are able to retain the three contaminants that can be found inside the lubricants: ...

Removal rating: 200 µm

... Metal filter cartridges are essential components in a variety of industrial applications, providing high-quality filtration to guarantee efficient fluid and gas processes. Industrial applications of metal filter cartridges: Our metal cartridges ...

Removal rating: 1 µm
Flow rate: 1.5 l/min - 3.5 l/min

The filter cartridge is the most important element of the filter system. Filter elements with one process remove solid impurities + water + soft sludge (sediments, resins, varnishes). Filter elements are made according to the type of treated liquid. For ...

... Technicis Filtration offers a comprehensive range of filter cartridges compatible with all pulse-jet industrial dust collectors on the market. These cartridges are specifically designed for filtration in powder coating, sandblasting, shot blasting, micro-blasting, ...

Removal rating: 1 µm

... Triple R’s continuous investment in research and development delivers the highest standard of efficiency in oil filtration. Protecting your investments while boosting productivity. Our filter elements are designed to cleanse industrial oils, removing ...

... FN8006H-for Hurricanes FN8006-for Vecloaders FN8058-for Hurricane 755/828 FN8052-for Older Vecloaders FN8055-1-for Hurricanes & Vecloader FN0035-for Hurricane 300 ...

... Plenum with a protective film with antibacterial and antimycotic action and side outlet for circular diffusers with adjustable cones and for variable geometry diffusers. SPECIFICATION • MATERIAL: steel • SURFACE FINISH: galvanised • FASTENING: with ...

... Climacs Hepa Filter Box designed to use in all types of places such as cleanrooms, surgery rooms and sterile places which need the top-level air conditioning. Supply Fresh Air With High Energy Saving Built from DKP sheets by using laser and CNC technology Full ...

... White Filter Cleaning Precleaning of polymer filters and housings with steam A proofed and patented technology – licensed by B&M Longworth (UK) Technical Benefits After use filter inserts are immediately given into cleaning system No carbonising ...

Removal rating: 0.5 µm
Flow rate: 2.2 l/min - 7 l/min

... Silver is drinking water! It ‘s a fine filtration for Water used in food. Get to the microfiltration. Where the action of dechlorination is safer due to the 0.5 micron filtration. Choose the SILVER Cartridge for your home tap with its 0.5 micron filtration ...