Other network communication equipment

Our IO-Link Wireless System on Module (SOM) enables you to equip your sensors & actuators with IO-Link Wireless even faster and easier. Even I/O modules or other automation components can be equipped with an IO-Link wireless master in ...

Cloud Monitoring Communication Module is an ETHERNET communication protocol switch module which can achieve genset (with SCI) connect to Internet. After logging into cloud server, module will receive corresponding genset controller communication ...

Synchronizing meter with LED 96x96mm They measure the phase difference (Δφ) between a generator and the network, showing its condition (lead or lag) until the synchronicity situation (phase displacement Δφ=0°) ...

Screen size: 7 in

The OPUS A6e is the first choice for complex HMI (Human Interface) which rely on the processing of a wide range of information. This unit features a bright, high-resolution display with a great picture – and therefore offers complete ...

Accessory charging & communication for smart earbuds Features - Show battery level of charging box on phone - Automatically pair TWS with phone when opening charging case - Accessory firmware updates Benefits - Simultaneous battery ...

Used in conjunction with MODBUS RS485 Selec / Third Party Master communication device Baudrate selections (19200, 115200 bps) Seven Slave ID selection (1 to 7) Supply Voltage: 18 to 30 VDC Specifications Display ...

The iTN221 is a “Pizza Box” 1.5U (full ETSI) sized, next generation multiservice access node. It offers a dual core architecture for both packet and SDH/TDM transmission. The iTN221 supports up to 2 x 1G and/ or 2 x STM-1/4 uplink capacities, ...

Screen size: 15.6, 18.5, 23.8 in

Industrial displays HMI solution of the latest generation for optimised us The latest monitor solutions of the OPD9000 series from ADS-TEC are optimally equipped for new future-oriented software applications due to the full HD display ...

The smallest of our T24 radio telemetry enclosures, the wireless sensor transmitter IP50, provides high performance telemetry measurement electronics for strain gauge, pressure, load cell, linear displacement and other 4 wire bridge sensors. The ...

Simple and versatile weight repeatability, equipped with a protective stainless steel cover, which allows the weight to be viewed up to a distance of 30 m General Description Terminal with 50 mm display. Allows viewing even in low ...

The V440-F C-mount code reader's flexible optics ensure maximum positioning for the most challenging symbols, and direct part marks using high-performance algorithms. A high power dual-core processor, advanced functionality and the ability ...

IntelliNode™ Interface Module IntelliNode Interface Module enables intelligent electronic devices not of S&C manufacture to function as team members in an IntelliTEAM SG™ Automatic Restoration System. The module does not add new features ...

Used in general elevator, CANBUS communication digtial and analog control; Double CPU design,safer and more reliable Main Features ● 32-bit high performance industrial class ARM MCU ● Double CPU design, safer and more reliable ● ...

-Modbus Protocol - Slave -Optional RTU or ASCII Modes -Selectable Baud Rate -Default Mode for easy access -RS485 Address set on "DIP" switch -Serial Interface (RS232/485) for Omni8/16C Annunciators Omni8/16C Serial Interface RS232/485 ...

Screen size: 15, 4 in

Our HMI solutions integrate state-of-the-art embedded control technology and there is a wide range of standard interfaces available for selection. In addition, you can opt for wireless communication interfaces, user authentication features ...

Screen size: 12.1, 18.5, 15.6 in

The 12“, 15“ and 18“ multitouch screen panels of the OP 500 series are setting new usability standards. A smooth work process with intuitive multi-touch gestures allows the extremely fast configuration of the process values, reducing ...

The CAN-BUS-Interface, manufactured by Roda Computer GmbH, is specifically designed as a rugged, water resistant conduction of C.2066.02 CAN-USB/2 interface. This device can generate on a ARM7 micro controller. Moreover, this product ...

2-door expansion module Built-in power supply Secure metal case Ample space for cables Battery standby provision Thanks to the CAA-470ATR, you can expand your CENTAUR system. Up to 3 CAA-470ATR can be connected to ...

-Channel spacing 100GHZ (0.8 nm) up to 48 channels can be multiplexed -Low insertion loss, insertion loss ≤5dB, typ 4.5dB -High channel isolation, adjacent isolation ≥25dB; non-adjacent isolation ≥35dB ...

Specification- Brand Name: DWIN Origin: CN(Origin) Model Number: DMG80480C043_06W is_customized: Yes Type: TFT Display Size: 60.86x102.57x4.3mm Type: TFT TFT Technique: IPS Grade: Commercial Driver IC: DWIN T5 Size: 4.3 Inch Touch screen ...

Additional board for door-entry phones art. 2708W/A and 2738W/A for call repetition and for an additional button with voltage free contacts. Cable for connection to the main board and fixing screws provided.

Screen size: 7 in

Msmart is a unified screen for Motortronics products and consists of an active touch screen / information display. In addition, Msmart supports multiple languages and supports dedicated information and graphs for each product. Msmart ...

Compact Juno USB Interface Description: Virtual laser power meter - From sensor to interface to PC - no power source needed Plug and play with all standard Ophir smart sensors Use with StarViewer free Android app to turn your smartphone ...

Industrial RS-422/485 Isolated Rail Repeater Ethernet Direct offers industrial grade media converters serial converters and device to allow devices with different serial interfaces to communicate easily. The serial media converters ...

Screen size: 7 in - 15.6 in

The fanless Kuhnke Vico touch panel with scalable i.MX6 process technology combines compactness with longevity and performance. Modern interfaces allow the Kuhnke Vico to be used as a cost-effective remote visualization client for any ...