Screen size: 4 in
This Basic HMI panel belongs to the Schneider Electric Harmony ST6 range. This single touch resistive HMI is made of alluminium front panel with a multi-color status indicator showing the various operating modes. This HMI interface is ...
Schneider Electric
Screen size: 10.1, 4.3, 7, 9.7 in
NEW FEATURES EMAIL & CSV Send e-mails when an event is triggered or send e-mails with datalog files (csv) from a data sampling object. ENHANCED SECURITY Enhanced security mode to manage users and classes easily with dedicated ...
Axioline F, Functional safety, Signal inputs: 2, Outputs OUT24V_0 and OUT24V_1: 2, Safe relay outputs: 4 (floating), N/O contact, degree of protection: IP20
PHOENIX CONTACT GmbH & Co. KG
Parker's IQAN-XC4x expansion modules are perfect for increasing I/O in an IQAN system. They have voltage, current, digital and timer inputs. The outputs are proportional and digital. The modules communicate with an IQAN master module ...
Safety monitors and interfaces on AS-Interface Features Safety monitors Verifies correct operation of the AS-Interface system. Monitors the safety devices connected to the yellow cable. Available in 2 versions: with 1 or ...
Expander module for contact expansion 4 safety contacts, STOP 0 1 Signalling output
Expander module for contact expansion 4 safety contacts, STOP 0 2 Signalling outputs
Modern machine control requires system-wide synchronisation of motion axes with microsecond accuracy. The NX I/O system offers this timing accuracy and repeatability for a wide variety of in- and outputs. Its ultra-fast internal bus system ...
Omron Electronics GmbH
Expansion module of the modular safety relay myPNOZ, inputs: 6 for monitoring of 2-hand monitoring Type IIIC to EN 574 and another safety function (1/2-channel wiring with/without detection of shorts across contacts) AND-linked, width: ...
PILZ
Expansion module of the modular safety relay myPNOZ, outputs: 3 n/o safe delay-on de-energisation switching relay contacts (t=0-300s), 1 signal output in semiconductor technology, inputs: 2 for monitoring 1 safety function: 1/2-channel ...
PILZ
Expansion module of the modular safety relay myPNOZ, outputs: 2 safe instantaneous switching semiconductor outputs, 1 signal output in semiconductor technology, width: 17.5mm General data Approval - CE CCC UKCA cULus Listed ...
PILZ
Four USB 3.0 host controllers Support 1500mA Max. Current per Port Supports four or eight USB 3.0 ports 3 Ports with Locking connector compliant with USB3 Vision V1.0 Standard-A Compliant with USB 3.0 Specification and Intel® xHCI ...
ADVANTECH
- Support Modbus/TCP protocol which can be connected with Modbus/TCP master - Dynamic configuration allows users to configure multiple inputs functions in one module - Two RJ-45 ports with the same IP address for building daisy ...
ADVANTECH
- 2 x RJ-45 (2-channel switch, share same IP address) Connector - PROFINET Communication Coupler
ADVANTECH
The NI‑9870 adds RS232 serial ports to CompactRIO systems. The serial ports are accessed directly from the FPGA to offer you flexibility in communicating with serial devices. The module has individual buffers on every port that save FPGA ...
NATIONAL INSTRUMENTS
The VersaPoint Distributed I/O system provides compact flexibility and allows users to install just the right amount of. I/O needed for each application.
Emerson
Signal types: RS-485 Ex i Field side of interfaces: RS-485 IS (PNO) Product Description - Fieldbus Isolating Repeater ISpac Highlights - Simple, front-end parameterization Bit refresh function improves signal quality Adjustable ...
Fieldbus Isolating Repeater ISpac Signal types: RS-485 Ex i & RS-422 Ex i Field side of interfaces: RS 422 Ex i, RS 485 Ex i Product Description - Fieldbus Isolating Repeater ISpac Highlights - Simple, front-end parameterization Bit ...
IO-Link Master acts as a communication gateway between IO-Link devices at the field level and control devices. IO-Link Master can be used to exchange field-level device signals with industrial communication protocols.
Autonics
graphic panels are 4.6-inch TFT LCD graphic HMIs with bright and clear displays offering 80 degree viewing angles. The resistive touchscreen (analog touch) allows flexible tag arrangements, and the data logger function allows data storing ...
Autonics
graphic panels are 5.7-inch TFT LCD graphic HMIs with bright and clear displays offering 80 degree viewing angles. The resistive touchscreen (analog touch) allows flexible tag arrangements, and the data logger function allows data storing ...
Autonics
Extremely small PCI Express Card in Half-Mini Card Form Factor • 4 CAN FD interfaces according to ISO 11898-2 • Bus mastering and local data management by FPGA • PCIe® Mini interface according to Mini Card Electromechanical Spec. R1.2 • ...
esd electronics gmbh
EtherCAT Slave Interface for PCI Express • Extend your PCI Express system with EtherCAT Slave (ECS) functions. • The memory area of the EtherCAT slave controller is directly mapped in the PCI Express address space. Easy ...
esd electronics gmbh
EtherCAT slave interface for PCI Express • Extend your PC with EtherCAT Slave (ECS) functions. • The memory area of the EtherCAT slave controller is directly mapped in the CompactPCI Serial address space. Easy Configuration ...
esd electronics gmbh
Tactical SHDSL Switch-Repeater ( 4 ports SHDSL, LAN : 2 Eth + 1 USB) Weight: 4.7 kg (including 1.1 kg battery) Consumption: 10W (power possible via the Telecom cable) Environment: MIL-STD-810 CEM: MIL-STD-461F Temperature: -40 ...
Robin‘6 Fully Managed AGV/AMR Communication Device Robin'6 is a cutting-edge, all-in-one platform designed for secure data communication across mobile robot fleets. Unlike traditional wireless communication solutions, Robin'6 is specifically ...
The Jump repeater for radio remote controls is designed for use with the radio control solutions of UD and RadioSafe series. The repeater relays a known radio message, thus significantly increasing radio coverage. The Jump radio signal ...
Profibus DP V0 interface module The MCIPRO485 is an external interfacing unit which permits to connect a FRER multifunction meter (fitted with RS485 interface and ModBus RTU protocol) to a ProfiBus DP V0 protocol system. This device ...
FRER
The MCI485REP repeaters simply amplify, or boost, existing RS-485 signals to enable them to cover longer distances. They extend the communication distance by 1200 m or extend the number of con- nected nodes by 32.
FRER
RS485 Modbus Communication module for MID Energy meters Communication module for MID meters C35-C70 with optical port. RS485 Modbus RTU - 1 DIN module
FRER
USB multisensor interface - 9206 In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB ...
• - Resolution : 800x600 • - Interface : RS232 • - Voltage : 12V/24V • - Temperature : -20°C ~ 70°C • - Outline : 217mm x 166.5mm x 31.2mm • - Size : 8" • - Protocol : Topway • - Active Area : 162mm x 121.5mm • - Touch Screen ...
We are TOPWAY, a professional manufacture for industrial LCD Module with many years experience, just as Medical, Audio, POS, Power Meter, communications equipment etc. Our renowned customers include Toshiba Tech, Emerson, GE...etc. We ...
7 inch Color TFT LCD Module LVDS 800x480 • - Screen Size(Diagonal) : 7 inch • - Resolution:800x480 • - Display Mode :Transmissive/Normal White • - Voltage:3.3V • - Viewing Direction : 6H • - Outline Dimension : 190.0*112.0*9.8(mm) ...
Customer-specific Solutions: Schlegel Fieldbus Interfaces Schlegel control and signalling units can be connected via fieldbus interface to the most common fieldbus systems (AS-Interface, CANopen, Profibus DP etc.) . We offer a wide ...
Bluetooth and USB Interface for commissioning parameterization & maintenance for field devices mobiLink is a mobile and a USB interface for HART, FOUNDATION Fieldbus and PROFIBUS PA. The Bluetooth and battery operation enables it ...
Softing Industrial Automation
Commissioning & maintenance interface with integrated power supply for field devices mobiLink power enables a direct connection to the field device without it having to be located within a functioning bus infrastructure. The integrated ...
Softing Industrial Automation
High Speed USB to CAN Interface Card for Mobile Use CANpro USB equips a PC or notebook with a top performing CAN interface with very short response times. It is suitable for a wide variety of CAN and CANopen applications like control, ...
Softing Industrial Automation
The ideal tool for launching tests, troubleshooting and documentation in data and ICT networks! The KE7200 network tester with memory function is the ideal assistant for commissioning tests, troubleshooting and documentation in data ...
Communications gateway designed to convert an RS-232/RS-485 physical environment to Ethernet and/or Wi-Fi in order to connect to Line-CVM and Line-M expansion modules. Allows using a single IP to connect to and configure all the devices ...
Digital panel instruments, which, according to the model, display the value of a measured electrical variable or proportional value of a process signal. Devices designed for supervision, regulation and control, using built-in analogue outputs ...
CEM-M are interchangeable communication modules for the CEM-C energy meters assembled on DIN rails. These modules can increase the performance of the energy meters, so that any meter can be adapted to the communication systems in place ...
Screen size: 7 in
Entry level seven inch HMI based on NXP i.MX93 Memory Soldered-down LPDDR4X/LPDDR4-3200 memory, up to 2GB total, 16-bit interface Graphics The i.MX 93 supports a high efficiency 2D graphics engine PXP for simple composition ...
SECO
Screen size: 15.6 in
High end 15.6 inch HMI based on Intel Atom® Processors x7000RE Series (Codename: Amston Lake) Memory Up to 16GB LPDDR5-4800 soldered down memory with IBECC (In-Band Error Correction Code) Graphics Integrated Intel® UHD Graphics ...
SECO
Screen size: 10.1 in
Soldered down LPDDR4-4000 memory, 32-bit interface, up to 6GB Graphics Integrated Graphics Processing Unit GC7000UL, supports 3 independent displays. Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-4, MPEG-2, ...
SECO
MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 27 available input/output modules 60 logical channels colour LCD display 3.5" TFT, with touchscreen recording ...
The Multicon are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. MultiCon CMC‑141 has all features included in CMC-99, but in addition it ...
As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation ...
Please specify:
Help us improve:
remaining