- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Cable accessories (insulation, connectors, etc.)
Cable accessories (insulation, connectors, etc.)
The Support Frame for Cable Ovetlength Q-Fiber is designed for placement in the telecommunication manholes or cable cellars. It is used for arranging and winding the cable overlength, it guarantees correct bend radius of the wound cable. ...
DLL Partners
Diameter: 8 mm - 18 mm
Suspension clamp SS 1025 is used for the suspension of ADSS cables and figure-8 cables. The flexible material used in the manufacture of the SS1025 has a long lifespan and adapts very well to win-induced vibrations.
DLL Partners
Diameter: 3 mm - 11 mm
Suspension clamps are composed of a UV resistant thermoplastic jaw reinforced with two galvanised steel plates. Its unique patented design has been developed to offer a common hardware fitting covering all suspension situations on wooden, ...
DLL Partners
MG-KMP wraparound cable markers are suitable for identifying large diameter cables, tubes and conduit. MARKINGenius® printing is exceptionally clear and legible and is protected from chemical and atmospheric agents.
Temperature: -40 °C - 85 °C
Ideal for • drop-in replacement for RG-316/RG-174 • Jumper assemblies in wireless communiations systems • Short antenna feeder runs • Any application (e.g WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, mobile antennas) requiring an ...
Times Microwave Systems
5004/LM-IEC MOST WANTED PRODUCT Designation : Alligator Clip w/ 4 mm Banana (female) Jack (socket). Electric : 1000 V CAT II / 1000 V CAT III / 600 V CAT IV, reinforced insulation, pollution degree 2, 20 A. Color : Red, black, ...
ELECTRO PJP
Tower Mount Kit to tower leg for a B50 protector PolyPhaser B50 mounting kit - mounts to a tower leg up to 2-1/4" diameter Specifications for T-1 Mount Type hose clamp Ground Type stainless steel clamp
PolyPhaser | Transtector
ERNI coax contacts can be used in various connector shapes. They find application as custom contacts in so-called "mixed connectors" and enable high current contacts up to 40 amperes. Assembly of the connectors is done with special custom ...
Hose diameter: 8 mm - 160 mm
Width: 9, 12, 7.5 mm
NORMACLAMP® TORRO® multi-range hose clamps are ideally suited to applications with high mechanical loads. Thanks to the continuous developments these products have undergone, they remain the benchmark within modern clamp construction. ...
NORMA GROUP
Hose diameter: 0.375 in - 0.875 in
Clamp has a 1/2″ stainless steel band with plated 5/16″ slotted hex head screw and housing. Recommended for most applications. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick ...
Precision Brand Products
Hose diameter: 0.563 in - 1.063 in
Width: 0.563 in
9/16″ band and housing are 200/300 series stainless steel. 5/16″ zinc plated, carbon steel hex head screw. 9/16″ band width offers greater sealing area. One-piece, spot weld free housing. Wide range of applications including automotive, ...
Precision Brand Products
Hose diameter: 0.375 in - 0.875 in
1/2″ 316 stainless steel band and housing. 5/16″ 316 stainless steel hex head screw. Non-magnetic, all “316” grade stainless steel construction. Used in highly corrosive and salt water environments.
Precision Brand Products
Nominal voltage: 15 V
Temperature: -65 °C - 200 °C
Length: 80 m
Our award-winning cable Cat6A for defense applications exceeds stringent protocol requirements. It’s proven to maintain clear data and video Cat6A transmission speed up to 10 Gb/s at lengths up to 80 m (262 ft.) with additional margin ...
W. L. Gore & Associates, Inc.
High-density micro-cables for blowing through micro-ducts 200µm fibre, M24, from 144 to 288 fibres Density: Up to 3 times more fibres in the same Microducts as classic micro-cables : up to 192 fibres with 8/10 mm Microducts, 288 fibres ...
Acome
Dielectric cables for blowing or pulling through ducts Entirely dielectric cable (earthing not required) Especially lightweight (a Tmax/weight factor much greater than 2), they can be deployed over very long distances. Versatile, ...
Acome
Distribution cables for blowing or pulling through ducts Dielectric and dry waterproof Duct cable widely adopted by major Telecom operators Combines compactness, lightness and robustness HDPE low-friction sheath to ensure installation ...
Acome
Hose diameter: 32 mm - 300 mm
watertight and tensile connection at very low overpressure due to special spiral geometry easily and quickly fitted re-usable conforms to RoHS guideline REACH according to --> Technology / Technical Information / REACH DESIGN Quality: ...
NORRES Schlauchtechnik GmbH
Temperature: -40 °C - 90 °C
SOLAR cable means flexible single cables specialty designed for wiring solar plants. SOLAR cables arc extremely robust and resist high mechanical load and abrasion. High temperature re-sistance and cxccllcnt weather-proofing characteri-stics ...
Hose diameter: 9 mm - 16 mm
Width: 6.5, 7 mm
Application area Hose mountings in low pressure range Material Steel Surface galvanised
HANSA FLEX AG
Hose diameter: 11.5 mm - 28 mm
Width: 7, 8 mm
Construction type screwless hose clamps Material Rustproof chrome nickel steel
HANSA FLEX AG
Hose diameter: 8 mm - 310 mm
Width: 9, 12 mm
Construction type gear hose clamps Construction type addition hexagon screw with slot Standard DIN 3017 Material Steel Surface protection galvanised
HANSA FLEX AG
Glow wire test - self-extinguishing Temperature range - -20 °C - 90 °C Voltage - 0,6 kV - 1 kV Material - Polyamide, Filling Silicone
WISKA Hoppmann GmbH
Hose diameter: 0.313 in - 0.5 in
Marine Grade Stainless Steel Screw Clamps Size(s): 5/16 and 1/2 in. (8 and 15mm) Description: Marine grade stainless steel screw clamps
The standardized range of HYDRA pipe clamps covers the range of nominal diameters and loads met with in practice. Besides common two-bolt and three-bolt clamps in accordance with DIN 3567, new horizontal and riser clamps with enhanced ...
Hose diameter: 40 mm - 120.5 mm
Width: 10 mm
360° StepLess®: uniform 360° compression and uniform surface pressure ToothLock® Technology: very high and permanent compression rates, outstanding expansion resistance Enlarged ear width (17 mm): enhanced clearance for easy assembly, ...
OETIKER
Nominal voltage: 600 V
EcoCable is the next generation of control cables. By combining better performance and minimum environmental impact, EcoCable uses its mPPE insulation and jacketing to provide all of the advantages in a smaller, lighter control cable. Up ...
Alpha Wire
The data cable Data Variable serves to transfer of measuring data at PC, laptop or workstation. You can use all devices for data transmission with a cable, which have got a variable data output (DATA VARIABLE). The data cable have got ...
Nominal voltage: 450 V - 1,000 V
Temperature: -60 °C - 180 °C
Single-conductor cable, silicone insulation with reinforcement, silicone-coated polyester braid, flexible, bare copper core Applications : Electromechanics Shipbuilding, railways Cabinets Approvals : Veritas Industrie (VERITAS) Operating ...
OMERIN
Diameter: 6 mm - 36 mm
Features •Ratchet P-Clamp A-Series for bundle diameters from 6.2 mm to 13.7 mm •One-piece ratchet closure design allows for easy installation during pre- or final assembly •Multiple configurations handle a wide range of diameters and ...
HellermannTyton España
Hose diameter: 12 mm
1/2" 12MM Spring Band Type Action Hose Tube Pipe Clamp Have Duty High Quality Spring Clips for hose tubing, etc. Material: 65Mn Spring Steel
Hose diameter: 10 mm
3/8" 10MM Spring Band Type Action Hose Tube Pipe Clamp Have Duty High Quality Spring Clips for hose tubing, etc. Material: 65Mn Spring Steel
Hose diameter: 11.1 mm
Manufactured for use with our 200, 210 & 202 series hose ranges, the 936 hose finishers are designed for push fit applications. The internal gear drive clamp ensures a secure leak free connection; easily assembled using basic hand tools. Compatible ...
Hose diameter: 0.18 in - 1.5 in
Goodridge Aluminium P Clip Tube Clamp - Aircraft quality clamps to support and locate hoses. They can be secured either by a rivet or a bolt. Material: Aluminium Fixing hole: 6.5mm
CABLING TOOL Steel body Manual tightening and cutting device
Tool for holding terminals and connectors during mounting (tightening the screws). Lenght: 265 mm; Weight: 0,65 kg
Clip for connecting grounding conductor to unpainted edge of device case or component which must be grounded.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining