Temperature: 20 °C
... Highly accurate gauge block calibration system • measuring arrangement with two aligned probes • LM 20 laser interferometric probe guarantees high measuring accuracy and linearity • only 15 standard gauge blocks required for the calibration of a 122-piece ...
Primary current: 0 A - 1,000 A
... Overview
The SUTO S030 is an AC RMS current transmitter combining a flexible Rogowski coil active part with a compact digital converter. It measures conductor currents up to 1000 A AC and provides a linear 4–20 mA DC output proportional to the ...
Primary current: 10 A - 1,000 A
... SUTO iTEC GmbH current clamp sensor is an AC RMS current sensor composed of a flexible active part (Rogowski coil model) connected to a compact digital converter, capable of measuring the current carried on a power conductor up to a value of 1000 A AC. The ...
Verification artifacts for machine tool based on metrological technology to offer a quick and reliable solution to the verification of the machine tool
The DUT-E ATS automatic calibration station is designed for telematics technicians to calibrate fuel tanks of vehicles and stationary machinery, especially where fuel monitoring is performed using additional accurate fuel level sensors. This station significantly ...
... The Universal Smart-Sensor measures electrical current from industry standard equipment with 4-20 mA, 0-5 V, or 0-10 V output. Features Smart-Sensor technology, with on-board calibration details and for easy calibration. • On-board calibration ...
... The Flexible Sensor is designed to make airborne ultrasound detection as easy as possible. This sensor is mounted to the end of a flexible, metal tube. Compatible with the SDT340, the SDT270 and the SDT200, the Flexible Sensor bends, allowing you to ...
... The portable calibration system Cal.flow enables high-precision flow calibrations according to the reference principle. The Cal.flow calibration system is used in conjunction with the EasyCal PC software to calibrate VSE flow meters with high precision. ...
... Product description
Precise testing needle for leak detection and integrity checks on geomembranes. Designed for on-site final inspections and repair support in industrial installation workflows.
Features
- Corrosion‑resistant
Das Lampentest-Modul vereint mehrere Funktionen in einem Baustein (Einzel- bzw. Sammelmeldungen und Lampentest). An den Eingängen (1, 3, 5, 7, 9, 11, 13) werden die ankommenden Störmeldungen aufgelegt. An den Ausgängen (2, 4, 6, 8,10, 12, 14) werden die ...
... VARIMETER EDS - Precise error localisation during ongoing operation In complex industrial systems, the localisation of insulation errors can be expensive and time-consuming. The insulation error search system from DOLD allows an automatic and fast localisation ...
... Single Channel – Part No. PR5104BB2A Dual Channel – Part No. PR5104BB2B The signal Isolator is installed in the safe area of an Ex environment, typically in a housing or secure enclosure Essential for Hazardous Applications ...
... Description
Compact module that converts four LVTTL (3.3 V) logic-level I/Os into isolated 24 V industrial I/Os. Designed to provide galvanic isolation between low-voltage logic devices and 24 V industrial control systems, enabling safe interfacing ...
... Control: Monitor and optimize your ultrasonic system. Simplicity: Quickly identify areas for improvement. Efficiency: Ensure your system is running well. ...
Voltage: 0 kV - 40 kV
... Properties For calibration and testing of all Sparktester types Measurement of direct voltage, alternating voltage and pulse voltage Current measurement, such as direct current and alternating current Function testing of the fault detector, by means ...
... Magnetic sensor for linear and angular reading. Very small size (36 mm x 13.5 mm), to allow installation in narrow spaces. Resolutions up to 0.1 μm. DPI resolution and inches reading available. Status indication through LED RGBW. Contactless reading. Many ...
... Absolute magnetic sensor for linear and angular reading. Very small size (53.5 mm x 19 mm), to allow installation in narrow spaces. Resolutions up to 0.5 μm and unidirectional repeatability up to ± 1 μm. Status indication through LED RGBW. Contactless ...
Primary current: 34 A - 1,275 A
... The Texense® HECS stands for Hall Effect Current Sensor. Thanks to its compact & lightweight housing, the HECS can be easily installed for non-invasive current measurement, which is a real asset for our customers’ installations. Initially developed for ...
... Incremental, digital or analog interface, very small design Repeat accuracy max. ±1 μm Max. resolution 0.1 µm (LD output circuit) Reading distance 0.1 … 0.4 mm Works with MB100/1 magnetic tape Signal period 1000 μm Output circuit sin/cos or LD Function ...
... Repeat accuracy max. ±2 μm Max. resolution 0.2 µm (LD output circuit) Reading distance 0.1 … 1 mm Works with magnetic tape MB200/1 Signal period 2000 μm Output circuit sin/cos or LD Function and status display LEDs ...
... BDD Beaker Experimental Equipment for Wastewater Treatment Applications： →To meet the demand for end customers to use it immediately →Used for various small-scale experiments →Suitable for preliminary testing, simulating wastewater treatment effects, ...
... E-Detector • Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction ...
... •2 x 3″ touchscreen •Standard with variable torque and angle •Field calibration •Multi-user level password protection •Life cycle and maintenance counters •Advanced data collection and operator identification •Low noise level at only 75 dB E-RAD ...
... Five models available Individually calibrated and traceable to NIST standards to ensure joint integrity Verifies that wrench is operating at maximum efficiency and safety levels Ensures torque wrench accuracy Set consists of bench, ...
... Five models available Individually calibrated and traceable to NIST standards to ensure joint integrity Verifies that wrench is operating at maximum efficiency and safety levels Ensures torque wrench accuracy Set consists of bench, ...
... Cable transducer suitable for industrial applications needing measurement of linear positions. Sturdy, reliable, featuring a compact-sized design, it is studied to offer a variety of mounting solutions, even for small spaces. Configuration by means ...
... Magnetic Tablet for Dynamic Calibration and Periodical Qualification of Tablet hardness Testing Instruments This instrument represents a tool for calibrating and qualifying the hardness range of Pharma Test and other brand tablet hardness testers. The ...
... Introducing the MicroFlex, a Micro Single Leaf Flexure, which has Solartron quality ruggedness and accuracy in a tiny package; Just 5.5 mm high. Key features • Measures just 16.5 long x 5 wide x 5.5mm High • 0.4mm measurement range • ...
... •± 0.25 mm measuring range •Extension arms •Up to 0.25 µm repeatability •IP65 sealing •Normal or Reverse Spring Actuation With the same advantages as the parallel flexure the single leaf flexure offers the gauge builder access to even more measurement ...
Temperature: -10 °C - 55 °C
Voltage: 11 V - 18 V
