Vacuum components

This item is designed to be used with a vacuum cup. It is constructed to tilt the cup at a specific angle, which can range anywhere from 0° to +/-150°. The angle is then held firm by tightening the screw at the joint. The vacuum lead ...

The VAC suspensions are used to put the vacuum cup to the angle following the support under a pre-measured angle (0° to +/-90°). These suspensions are scaled in the middle of the vacuum cup along with the two female threads. This product ...

The Vuototecnica 208005 series is an array of micro cup holders constructed with stainless-steel stem and spring. Their threaded sleeve is integrated with self-lubricating bush that ensures optimum durability and sliding of the stem. ...

The main feature of the cup holders described in these pages is their reduced size, which results in a reduced weight and bulk. They allow using even very small cups, guaranteeing, given the same diameter, the same performance as the ...

The main feature of the cup holders described in these pages is their reduced size, which results in a reduced weight and bulk. They allow using even very small cups, guaranteeing, given the same diameter, the same performance as the ...

The VRD-ANB-CD vacuum regulator is constructed to control the output vacuum from ) psig to its full vacuum. It is especially helpful in minimizing the weight and space. The unit weighs up to 25 grams and it is composed of brass and stainless ...

Vacuum regulator, REV38 series make sure that the vacuum has an accurate and constant speed. The adjustment knob helps the user achieve a very fine adjustment up to -/+0.13 mbar. It has a flow rate of 16.2 Nm3/h This device is made of ...

Vacuum range: 762 Torr

The Fairchild Model 17 Vacuum Regulator is designed for systems that require system vacuum control up to full vacuum. The M17 features full vacuum capability. It has a control sensitivity of 1/2"water column. It has a high flow capacity. ...

The high-flow vacuum regulator in the M1600A series is designed for applications that require high system pressure control and high flow, above and below the atmospheric pressure. In addition, the stability of the regulated vacuum or ...

Vacuum range: 762 Torr

The Model 18 Vacuum Relief Regulator from Fairchild is ideal for use in systems that need vacuum control that reaches a full vacuum. This relief valve makes use of the principle of balance of force to allow air from the atmosphere into ...

- Compensation for the pressure variations inherent in vacuum generators - Also suitable for measuring and testing tasks

Vacuum range: 0 bar - 1 bar

The V-800 Series vacuum regulators are designed for applications requiring high precision in a miniature package. Hysteresis free adjustments are made through a non-rising stem. Available with an attractive knob, or plain, allowing installation ...

Vacuum range: 0 bar - 1 bar

The V-900 Series vacuum regulators are designed for applications requiring high precision in a miniature package. Hysteresis free adjustments are made through a non-rising stem. Available with an attractive knob, or plain, allowing installation ...

Vacuum Regulator IRV ・Allows for the adjustment of vacuum line pressure ・Single-sided connection series ・Weight reduced by 20% (Compared with the current IRV2000 with 　IRV20 fitting) ・Built-in One-touch fittings ・The pressure ...

Vacuum Regulators ITV Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight in design with a bright and easy to read LED display. ...

This features control sensitivity of .125" (.32 cm) water column allows usein precision applications, with a balanced supply valve minimizes effects of vacuum variation, an aspirator tube compensates for downstream pressure droop under ...

The Fipa vacuum regulators with external leakage features the control of the vacuum by ventilation, with atmospheric air when a preset vacuum level is reached. Designed and constructed to give a constant vacuum level even with workpieces ...

For a perfect dosing result The suction controller SDR is a spring-loaded diaphragm valve which is opened by the suction pressure of the dosing pump. Thus it is ensured that no medium can flow if the pump is not working or cannot create ...

Integrated packages destined for screw or vane compressors, with temperature control functions, oil circuit, oil filtration, air oil separation, minimum pressure and check valve. Available in various sizes, to equip compressors with 3 ...

High Flow, High Accuracy Electronic Vacuum Regulators Vacuum ranges from 0 to 29.9 inches of mercury vacuum with flows of hundreds of SCFM can be achieved when a vacuum calibrated QB2 is used with an air piloted vacuum regulator. Vacuum ...

Conoflows Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions

Series NPF flexible suction pad mounting allows a better adaption between the suction pad and the workpiece due to its flexibility in all directions.

Vacuum range: 1 mbar - 1,000 mbar

The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control ...

Vacuum range: 0.001 mbar - 1,000 mbar

The VACUU·SELECT fine vacuum control packages are designed for vacuum control in the range of 1 mbar to 10-3 mbar. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process ...

Vacuum range: 0.1 mbar - 1,000 mbar

Looking for an intuitive, easy-to-use vacuum controller? VACUUBRAND has introduced the VACUU·SELECT controller - an application-based controller with a touch screen display for all of your lab-scale vacuum processes. The VACUU·SELECT ...

Spring-loaded suction cups for contact surfaces at right angles to suction cup Suitable for mini and bellows cups

Suction fingers with swivel head for inclined surfaces to suction cup, suitable for mini and bellows cups The suction cup can be adjusted for inclined surfaces uo to 45°

Spring-loaded suction finger with swivel head for contact inclined surfaces to suction cup Suitable for mini and bellows cups The suction cup can be adjusted for inclined surfaces uo to 45° Secured against rotation

We are involved in offering Brass Glass Stopper to our valued clients. Offered product is stringently designed with the aid of best available technologies using quality approved metal alloy to ensure its maximum durability. Best in quality, ...

switch-on the vacuum to pick up the parts HS means "High-Speed" 8N lifting power travel 40mm non-rotating very short configuration

Vacuum range: 7.5 mbar - 345 mbar

VSO-EV is an electronic vacuum pressure control unit designed for laboratory instruments where precision vacuum control is required. The VSO®-EV is a Miniature Electronic Vacuum Controller specifically configured and optimized for ...

Y696VR Series vacuum regulators are used where a decrease in vacuum must be limited, such as between a tank and vacuum source to control vacuum in a tank. A decrease in vacuum (increase in absolute pressure) on the diaphragm moves the ...

The I-100 is an easy to use interface to regulate the vacuum conveniently. As the central interface of the economical solution “Rotavapor® Essential” it increases the efficiency of the evaporation process. Functional design fulfills ...