The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument which is used to scratch the surface of samples in preparation for adhesion, salt spray and corrosion tests. The tool is held horizontally and pulled across ...
The Elcometer 1538 DIN Scratching Tool has interchangeable carbide cutters for the preparation of specimens to be used for corrosion testing. Supplied complete with a 0.5mm (0.02”) or 1mm (0.04”) cutter. An adjustment device to ...
Thermal Deaerator /Steam Deaerator/Thermal Spraying Oxygen Eliminator/Deaerating Feed Water Heater/Demineralized Water Tank/Deaerator Storage Tank/Oxygen Extractor/Thermal Deaerator/Vacuum Deaerator/ Sponge Iron Deaerator/Deaerator Equipment Use Industrial/Power ...
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank® are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic ...
Atexxo Manufacturing BV explosion proof air conditioning system developed for high ambient (dessert/tropical) conditions. These VRV systems are designed for safe use in zone 2 gas/vapor hazardous locations. ATEX Zone 2 is the European ...
The sampling gate can be installed before or after the dedusting/polishing process. This allows to automatize the sampling procedure. Key benefits • Secures your quality process • Automatizes product sampling • Reduces manual operation ...
X travel: 0 mm
Y travel: 0 mm
Maximum cutting height: 35 mm
Q-2 Metallographic Specimen Cutting Machine Q-2 metallographic sample cutting machine is using high-speed rotation of the sheet to cut off metallographic sample, it is widely used in a variety of metal materials cutting of the metallographic ...
Media degassing or “de-aeration”, pre-heating to a temperature of 37°C and absolutely precise gravimetric dispensing according to the recommendations and demanded for dissolution testing from the US FDA authorities are standard for the ...
Main parameters: QG-3 Metallographic Sample Cutting Machine can be used in the cutting of general all-facies and lithofacies sample materials, which could guarantee the cutting of optimum samples under the safe conditions. The machine ...
QG-5A multifunctional cutting machine is mainly used for cutting irregular general metallographic sample materials such as round cylinder and polygon and protruding platforms, etc. This machine adopts double-shells totally closed structure ...
This machine adopts double-shells totally closed structure and double quick clamp organization. It can guarantee cutting under absolutely safe status, this machine equipped with front, back board, the thickness of sample can be changed ...
High quality flue gas conditioning guarantees highly accurate measuring results. Condensation of the flue gas sample must be avoided in the pathway from the point of gas extraction to the flue gas analyzer. None of the target substances ...
The Shaw Moisture Meters Model SU4 sample conditioning unit is designed to reduce the dryer/process line pressure to give a pressure and flow suitable for measurement. The system is designed for gas or general compressed air sampling ...
TQC Sheen Machu Scratching Tool to perform a Machu test (corrosion test) with. Each tool is provided with a 1mm width cutter to cut the coating down to the metal, complying with ISO 17872. Two models are available: - knife bracket ...
Maximum temperature: 0 °C - 450 °C
Pressure: 0 bar - 110 bar
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and may result in an incorrect ...
Sodium Lauryl Ether Sulphate (SLES) is a surfactant widely used for the manufacture of cleaning products, soaps, shampoos and even toothpaste. Thanks to its capacity as a wetting agent and emulsifier, it is also used in the cosmetic and ...
to test breathability / pressure difference (item no. 1632) The sample-holder is equipped with the opening width of 25 mm according to DIN 14683. The material specimen / mask is placed on the underside of the holder, the upper part ...
Pot Digester Electric PDE (300, 400, 500 liters) is a modern high-tech universal industrial equipment designed for the preparation of a wide range of products: > Confectionery industry – sugar syrup, invert syrup, condensed milk, confectionery ...
Pot Digester Electric PDE (60, 100, 160, 200, 250 liters) is a modern high-tech universal industrial equipment designed for the preparation of a wide range of products: • Confectionery industry – sugar syrup, invert syrup, condensed ...
Pot Digestion Gas PDG (160, 200, 250, 300, 400, 500 liters) intended for the preparation of a wide range of products: • Confectionery industry – sugar syrup, invert syrup, condensed milk, confectionery or chocolate glaze, jam, marshmallow ...
AutoBlend Systems provide an effective Ether Sulphate Dilution Package. Features Your Task Present-day demands on a tenside are, as well as good wetting, dispersing and washing properties, absolute kindness to skin and bio-degradability. Alkyl ...
Powerful universal fusion unit FRIAMAT prime eco Bluetooth Full documentation full traceability functions 20,000 fusion protocols Output via USB interface or app (smart phone) Supervisor function State-of-the-art toroidal core ...
Aliaxis
Consistent representative sampling that meets industry standards Versatile uses and flexible sizing options Efficient operation Ergonomic, hard-wearing design Reliability and adaptability from Essa® Rotary Sample Dividers Accurately ...
The Sample Band Saw is recommended for producing test sample pieces from all sorts of materials for testing. The Band Saw produces perfectly cut samples to be used in a variety of testing equipment to measure qualities like foam porosity, ...
The types of the deaerator & water tank is including the integrated deaerator, the spray tray deaerator, etc. The integrated deaerator effectively combines the functions of the deaerator and the water tank , which is the world's most ...
Automatic Sampler STA Characteristics 1. Maximum size of the sample: 150 cm³ 2. Maximum size of particles: 8 mm 3. Maximum capacity: 20 samples/minute 4. Maximum pneumatically pressure: 6 bar. Weight: 3,7 kg
The gas cooler is used in gas analysis to lower the dew point of the moist sample gases.
Power: 1,800, 1,250 W
Flow rate: 4 l/min
Pressure: 1.5 bar
For accessible cooling of industrial or laboratory equipment. Your Flexible Air Cooled Chiller FLEXI CHILL is an air cooled chiller. It flows cooling water to your system by the use of a robust centrifugal pump. The water is cooled down ...
GALVANIZING KETTLE Nutec Bickley provides Galvanizing Kettles equipped with high velocity burner and ceramic fiber lining, pre-assembled and carefully tested at our facilities, ready for transportation and/or installation on-site. Nutec ...
Steam cooler for pipeline installation. Sizes: DN 25 to DN 350 Materials: Our steam coolers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321 Superheated steam recooling Steam ...
Please specify:
Help us improve:
remaining