- Metrology - Laboratory >
- Laboratory Equipment >
- Sample preparation
Sample preparation
Maximum temperature: 60 °C
Cost-effective cooling for sampling close to the process thanks to our passive cooling system - low-maintenance and explosion-proof. Samples of fluids and gases in industrial plants are often very hot. That can be a danger for personnel ...
Reliability plus flexibility Designed for use with BW single and multi-gas detectors, the BW Sampler is a motorized pump that allows remote sampling capabilities to be added to any BW diffusion instrument. The Sampler is an excellent ...
Maximum temperature: 5 °C - 50 °C
Compressor Cooler Nominal capacity 615 kJ/h respectively 583 Btu/hr 1 or 2 gas paths Stainless steel, glass or PVDF heat exchanger Status display Up to 45 °C / 113 °F ambient temperature Approvals: ATEX, EAC Ex, IECEx This ...
Bühler Technologies
Buhler's conditioning system delivers a dependable process of data even under the inconsistent ambient and process conditions. The system comes off in modules; it is delivered as a mobile or stationary stand-alone or 19 in. rack mount ...
Bühler Technologies
Maximum temperature: 5 °C - 55 °C
Pressure: 0 Pa - 200,000 Pa
Peltier cooler with 1 heat exchanger Version for ambient temperatures up to 50 °C Nominal capacity 55 kJ/h (at 5 °C output dew point) Power supply 24 V DC Heat exchanger made from stainless steel, Duran glass or PVDF Dew point 3/5/10/15 ...
Bühler Technologies
To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important ...
Round piece diameter: 63 mm
A versatile, programmable precision high speed saw designed to cut a wide variety and size of materials. The TechCut 5™ automatically sections materials at high speeds, increasing sample throughput. The microprocessor-based system controls ...
Allied High Tech Products
Horiba Scientific's QBlock Series is capable of providing a broad selection for choosing the appropriate hot block to increase efficiency of digestion and through put. These devices feature a teflon-coated graphite heating block, and ...
HORIBA Scientific
Unsurpassed sample integrity Available as both a 19-inch rackmount for iMOv or a stand-alone benchtop unit for miniMOv, our sample concentration system (SCS) is designed around our purge lip sealing valve (PLSV) trap and release (T&R) ...
Unsurpassed sample integrity We know that sampling system quality greatly impacts analytical system performance. That’s why for over three decades, we’ve been designing only the best sampling solutions, like our innovative sample stream ...
Power: 45,000 W
Maximum temperature: -20 °C
For sharp images in imaging diagnostics. In the OEM segment, we cooperate with leading medical device manufacturers to develop specific cooling solutions for worldwide use and also advise radiologists on-site about selecting the suitable ...
Power: 50 kW - 800 kW
Maximum temperature: -8 °C - 65 °C
Yukon is Enex’s innovative range of air-cooled and water-cooled CO₂ transcritical chillers for the cooling of water and brine mixtures, suitable for such applications as process cooling, cold storage, HVAC, ice rinks, wineries, and more. ...
Power: 50 kW - 600 kW
Maximum temperature: -8 °C - 65 °C
Yukon – R is Enex’s innovative range of transcritical reversible heat pumps – chillers for the heating and cooling of water and brine mixtures, suitable for HVAC, district heating, and other applications. It offers a split configuration ...
The gasometric bell with helical guides is used on sludge treatment plants when it is necessary to store and at the same time supply at constant pressure the gas produced by the anaerobic decomposition of the sludge. It consists of a ...
The anaerobic sludge digester is used for the sludge treatment when it is necessary to obtain the anaerobic biological decomposition of the organic matters contained in the sludge, according to a mineralization, humidification and gasification ...
Air-condensed oil cooling systems for external tank (V) version. Especially suitable for the direct cooling of machines tool and filtering systems. Their characteristics are: • Steel frame painted • Compressor type Scroll • Copper ...
Rotational speed: 6,650 rpm
The CLM-100.1 colloid mill is designed for homogenization and emulsification of liquid materials (thick suspensions with high shear tension) in laboratory conditions, for such purposes as bitumen emulsion production. The machine can ...
Motor power: 8, 160 kW
Bauermeister Universal Mills operate successfully in a wide range of applications for grinding soft to medium- hard materials such as sugar, gypsum, limestone, etc. up to a hardness of approx. 4-5 Mohs. Universal Mills are mainly used ...
Bauermeister Zerkleinerungstechnik GmbH
Output: 1 kg/h - 200 kg/h
Motor power: 1 kW
Trials and test series for product development and small batch productions are the ideal field of application of the Bauermeister Universal Laboratory Mill UML The Bauermeister UML offers many solutions for the fine and superfine grinding ...
Bauermeister Zerkleinerungstechnik GmbH
Motor power: 4 kW
Trials and test series for product development and process optimisation as well as small batch productions are the ideal field of application of the Bauermeister Laboratory Roller Mil LRC 250. It is suited for the gentle size reduction ...
Bauermeister Zerkleinerungstechnik GmbH
The SmartPrep Extractor is designed for simple automation of manual solid phase extraction (SPE) methods. Just like manual SPE, up to 12 samples per SmartPrep System can be run. To control the SmartPrep System, choose the front touch ...
Horizon Technology, Inc.
SPECIFICATIONS Manual microtome with sample advance system Internal handwheel locking device Total slices counting display LED (1-99) Standard clamp and knife (12cm) Section thickness : 1-25 micras Min. adjustment : 1 micras Precision ...
Based on the principle of an intrusive piston sampling fixed volumes, the Isoloks series of sampler is a proven product in many applications including : Waste water sampling Slurries sampling Cement sampling Nuclear products Very ...
ProSys Sampling Systems Limited
Extracts a representative powder sample from pack-off booths, drop chutes and hoppers. Can be either manually or automatically operated. Operation The auger is run in reverse to clean the sampler of any powder. The auger is then ...
ProSys Sampling Systems Limited
Extracts a representative powder sample of fixed volume from dryers, pack-off booths, drop chutes and hoppers. Consists of a piston with a machined cavity used to capture a fixed volume of representative sample. Can be either manually ...
ProSys Sampling Systems Limited
The name already says it all: This laboratory mill is remarkably flexible. With this versatile machine you can vary grinding chamber size, material selection and grinding technology to an enormous extent. The DYNO®-MILL MULTI LAB is the ...
Willy A. Bachofen
This high-efficiency laboratory mill achieves the finest and narrowest particle distributions down to the nanometre range. It features a highly efficient energy input for the most challenging dispersion and grinding tasks. It is the scale-up ...
Willy A. Bachofen
This compact agitator bead mill covers a very broad spectrum: It allows dispersion and fine grinding down to the nanometre range to be achieved quickly and efficiently. And it is suitable for products with low to high viscosity. The DYNO®-MILL ...
Willy A. Bachofen
X travel: 250 mm
Y travel: 250 mm
Z travel: 200 mm
The Multi-Axis Compact is a 4-axis laser system for processing a wide range of components, enclosures and fabrications. The compact platform can easily fit through a standard size door and is designed for machining parts that are smaller ...
Power: 200 kW - 8,000 kW
Maximum temperature: 30 °C - 200 °C
Pressure: 1 bar - 320 bar
Coal chemical industry (shift gas cooling, booster aftercooling, syngas cooling) Petrochemical Industry (atmospheric distillation, vacuum distillation, catalytic cracking, etc.) Power industry (waste steam condenser and heat exchanger ...
Moon Environment Technology Co.,Ltd.
Machine for fine milling, classifying or mixing powders or suspensions Comprises three components which are combined with each other: the platform, the function modules and the accessories Various function modules Was developed to ...
Maximum temperature: 0 °C - 40 °C
No ReviewsWrite the First Review Keep your samples cold, clean, and dry • - Waterless—no more wet melting ice or floating sample tubes • - Ceramic-coated beads maintain a 4°C temperature for the entire working day • - Holds approximately ...
Techne
Flue Gas Cooler/Reheater Flue Gas Cooler during installation stage of the 1000MW Project
Streamline Flash and Preparative HPLC chromatography with a compact, easy-to-operate unit The CombiFlash® EZ Prep offers streamlined Flash and Prep HPLC chromatography in one compact, easy-to-operate unit. With just two clicks, ...
Teledyne Isco
Power: 1,200, 600 kW
Maximum temperature: 40 °C
Commercial refrigeration (supermarkets) Industrial refrigeration (production, packaging and distribution) Fans: 800-910 diameter AC/EC fans Fans: The heat exchangers of the ThermoKey gas cooler guarantee operating pressures ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining