Sample preparation

The autosampler from Analytik Jena is ideally used for flame mode, hydride techniques, and atomic fluorescence. The device is flexible and highly efficient for a fully automatic sample preparation. It has an automatic dosing of modifiers ...

Output: 0 kg/h - 500 kg/h
Motor power: 2,200 W

When it comes to applications with high demands on the particle size distribution, the laboratory grinder LWM 100 is the optimum machine. The fast roll change resulting from the special roll suspension and the precise control via a PLC ...

Output: 500 kg/h

Low-dust milling using GMP conforming roller mills The department "Particle technology" of NEUHAUS NEOTEC Maschinen- und Anlagenbau GmbH has improved the well-established laboratory grinder LWM 100 for the most demanding applications ...

X travel: 1,300 mm - 1,500 mm
Y travel: 1,300 mm - 3,000 mm
Tube diameter: 50 mm - 150 mm

The perfect combination of cutting plate and cutting pipe! The Ninja turtle table type plasma 2 in 1 cutting machine by ARCBRO® is a innovative CNC plate & pipe cutting solution that comes in a small footprint. It can handle both metal ...

AE-MP streamlines the operative workflow for microbiology and plant tissue culture laboratories. In one single device it is integrated the preparation, sterilization and dispensation of high quality culture media with outstanding batch ...

MBC Series Kjeldahl Digesters Compact block digestion system suitable for efficient, versatile, and scalable block digestion to perform safe Kjeldahl digestions and much more. Applications Determination of nitrogen/protein such ...

RANDALL AND SOXHLET EXTRACTOR - FAT EXTRACTION SYSTEM SX-6 Fat extraction system or solvent-soluble substance extraction using the Soxhlet and Randall methods. Suitable for a wide variety of samples. Applications Fat or solvent-soluble ...

5E Series Sample Divider is the updated motive division apparatus after simulating manual division. It is suitable for sample division in coal mine, iron ore, metallurgical coke and chemical industry. Models Available: 5E-MR1/8 Sample ...

5E-CYH Railway Wagon Sampler is used for random sampling of bulk materials in the carriage of train or truck. It consists of sampling system, electrical control system, automatic ultrasonic positioning system and coal surface detecting ...

5E-CYQ Road Wagon Sampler is used for random sampling of bulk materials in the carriage of train or truck. It consists of sampling system, electrical control system, automatic ultrasonic positioning system and coal surface detecting device. Features: 1. ...

Rotational speed: max 30000.0 rpm

Different products and applications also require different grinding techniques on a laboratory scale. Simple grinding tool changes make this small laboratory mill the right one for the job! The Condux® 60 is a high speed impact mill ...

Rotational speed: 1,000 rad.min-1 - 4,200 rad.min-1

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with easy handling and the use of small quantities from 0.25 to 0.5 l for product sizes down to the nanometer range. Within a short time it is ...

Rotational speed: 1,000 rad.min-1 - 4,200 rad.min-1

Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical ...

This distributor is for quick, simple division of powders & granules into 8 samples. Outlets in hopper can be closed for filling, mixing, then distribution. Advantages No dosing chute required for the sample feed! Mixing function ...

Double Roller Mill WS-L The laboratory version of our two-roller mill is additionally equipped with a feed hopper, a base frame with collecting box and the control system, so that it is delivered ready for connection. Our Roller Mills ...

Automatic Laboratory Disc Mill TS 1000-A We now make your work even easier: fill in the sample, grind & remove the ground sample in the beaker! This eliminates the need for your employees to handle heavy grinding vessels. 1. fill the ...

The 10kN is an automatic specimen preparation system that has a motorized X and Y table that is utilized with an automatic specimen blanking machine. It operator is secured by a protection instrument throughout the blanking equipment ...

The M-Cut 65 Model, manufactuerd by Zwick, is a C-shape specimen blanking machine which is supplied with a table side extension. Saving time significantly and changing tool frequently are possible with M-Cut 65. It can be used with 650kN ...

With the embedded control technology, WS1801 automatic water quality sampler is an intelligent sampler with complete functions. The built-in unique temporary storage device of water samples can provide uninterrupted mixed water samples. ...

Multipoint Sampler and Doser for Innova Photoacoustic Gas Monitors The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling ...

Final grain size: 5 mm
Rotational speed: 150 rpm
Output: 50 kg/h - 200 kg/h

• Direct driven staggered rotor • Special knife design makes adjustment unnecessary • Easy access for maintenance and cleaning • Slow rotor speed creates less noise and dust • Easily customizable to suit different applications The ...

Fast, reproducible and safe media sterilization The preparation of agar medium is a routine task in today’s laboratories. The typical workflow is to dissolve the components in a flask followed by sterilization in an autoclave. However, ...

The preparation of agar medium is a routine task in today’s laboratories. The typical workflow is to dissolve the components in a flask followed by sterilization in an autoclave. However, this procedure has several disadvantages. First, ...

NTE Process has recently integrated into its range of solutions the dry grinding, micronization and dosing processes for multiple industrial applications – from mineral raw materials to the chemical industry, as well as the production ...

STACK GAS SAMPLING SYSTEM The dry extractive SEC™ system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed ...

DIOXINS & FURANS PERMANENT SAMPLER Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system ...

Final grain size: 3 µm - 45 µm
Output: 300 g/h - 12,000,000 g/h

Suitable for grinding materials with high hardness, high purity and high added value. Low-temperature pulverization without medium, especially suitable for heat-sensitive, low-melting materials. Control particle sizes precisely, available ...

Final grain size: 10 µm - 1,000 µm
Output: 1 kg/h - 20,000 kg/h

• Integration of grinding and classifying, classifying wheel is adjusted to obtain ideal particle, and the classifying rotor can be installed horizontally or vertically. • Different types of grinding disc are used based on characteristics ...

Output: 0 t/h - 11 t/h

The product particle size control is flexible, special design is adopted to reduce noise and emission. Automatic control, easy to operate. According to the scale of investment, it provides personalized customized scheme and provides value-added ...

Power: 18.5, 4, 7 kW

With VLS' refrigeration systems, thanks to the scraping of the surface, it's possible to obtain a high performing thermal interchange and a balanced cooling also with very viscous liquids. Semi-hermetic type compressor on vibration ...

Power: 4, 7, 10, 18.5 kW
Maximum temperature: -5 °C - 25 °C
Flow rate: 495 l/h - 4,500 l/h

Standard version in stainless steel AISI304 with frame on wheel: Semi-hermetic type compressor on vibration damping feet, complete of: – Breathing cocks. – Electrical resistor for oil heating. – Forced lubrification. – Thermal ...

TTP Engine Cooling Modules API Heat Transfer offers Thermal Transfer Products manufactured custom OE engine cooling modules for small gasoline engines to large-horsepower turbo diesel applications. Your choice of a variety of materials ...

Rotational speed: 6,000 rpm
Motor power: 2 kW
Machine weight: 68 kg

This compact, sturdy pulveriser has been designed and developed in South Africa for the general grinding requirements of a typical industrial laboratory. The South African coal industry makes use of these mills. For normal use, the ...

Rotational speed: 450 rpm
Motor power: 4 kW

The MACSA 300 Overhung Disintegrator Hammer Mill has been designed to satisfy the needs of Laboratories, Research Institutions and Industries requiring size reduction on a semi-production scale. The Mill is fabricated from Mild Steel ...

MACSALAB Hi - Cap Impact Hammermill The range of Macsa Impact Hammer Mills is specifically designed for reduction of medium hard to hard friable materials. The dynamically balanced rotor comprises of six replaceable hard faced swing ...

Sugar Beet and Cane mills often need to make multiple analysis from a single sample while reducing bench chemist involvement. Sugar testing lab automation allows chemists to reduce human error in the labs while increasing throughput and ...

Rudolph Research understands that the Flavor and Fragrance industries have unique needs. Many wish to make multiple tests of their sample such as automated Density, SG (Specific Gravity), RI (Refractive Index), OR (Optical Rotation), ...

The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. ...

Sampler MZEA/MZEF and Sample Collector MZEP/MZER Representative sampling is significant in grain processing and related fields, whether for maintaining consistent product quality or for creating retention samples. Bühler’s auto-matic ...

Our animal feed solutions help you produce top quality feed and to make economical use of your raw materials and energy. As a technology partner with long-lasting experience in the industry, we support you in every aspect of the production ...

Let yourself be inspired by the possibilities of lab automation! The new automatic liquid sampling system Samplify P can be connected to Schmidt + Haensch laboratory instruments such as all refractometers, polarimeters, density meters, ...

Application: Model SQ-80 Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear ...

1. Main performance and structure This machine is used to process standard splines for impact, tensile, compression, thermal performance and other tests of non-metallic materials such as plastics and organic glass. It can perform cutting, ...

Automatic Dumbbell Sample Making Machine Application: Automatic Dumbbell Sample Making Machine is mainly used for plastic, organic glass and other non-mental materials tensile testing. Feature: Automatically milling dumbbell ...