-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Metrology - Laboratory >
- Laboratory Equipment >
- Sample preparation
Sample preparation
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Rotational speed: 300 rpm - 3,000 rpm
Output: 60 kg/h
Variable 300 – 3000 rpm for fine comminution Due to the variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm you can fine tune the comminution process for each sample within a very wide range of applications. ...
Fritsch GmbH - Milling and Sizing

Rotational speed: 50 rpm - 700 rpm
Output: 60 kg/h
Variable 50–700 rpm for powerful comminution Due to the variable rotational speed adjustment in increments of ten between 50 and 700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting ...
Fritsch GmbH - Milling and Sizing

Rotational speed: 22,000 rpm
Fast pre- and fine-grinding in one instrument The FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line offers impact, shearing and cutting comminution in one instrument – with a higher performance, better cooling and is significantly ...
Fritsch GmbH - Milling and Sizing

Power: 90 W - 800 W
Maximum temperature: -30 °C - 70 °C
Flow rate: 21 l/min
Powerful, compact and energy-efficient circulating chiller for cooling applications up to -30 °C. The on-demand and speed-controlled compressor, operated with natural refrigerant, achieves a cooling capacity of 800 W at a minimum energy ...
IKA

Power: 90 W - 800 W
Maximum temperature: -30 °C - 70 °C
Flow rate: 21 l/min
Powerful, compact and energy-efficient recirculating chiller for cooling applications up to -30 °C. The on-demand and speed-controlled compressor, operated with natural refrigerant, achieves a cooling capacity of 800 W at minimum energy ...
IKA

Power: 2,500 W
Maximum temperature: -25 °C - 200 °C
Flow rate: 31 l/min
The CBC 5 basic is a powerful refrigerated and heating circulator with strong heating and cooling power for an operating temperature range of - 25 °C to + 200 °C. It is best suited for external applications thanks to its proven pressure ...
IKA

Power: 275 BTU/h - 5,600 BTU/h
EXAIR's new Small 316 Stainless Steel Cabinet Cooler® Systems with ETC (Electronic Temperature Control) keep electrical enclosures cool with 20°F (-7°C) air while maintaining the NEMA 4X rating of the enclosure and resisting the heat ...

The Ultramicrotome Leica EM UC7 provides easy preparation of semi- and ultrathin sections as well as perfect, smooth surfaces of biological and industrial samples for TEM, SEM, AFM and LM examination. New Standard in Ultramicrotomy Combining ...

Distillation unit for fuels and solvents Diana 700 is the ideal solution for automatically performing high-precision distillation range analysis at atmospheric pressure. Typical samples to be characterized include petrochemical products, ...
Anton Paar

High-throughput autosampler solutions for up to 192 samples Anton Paar’s ASX autosampler can be used in combination with all Anton Paar flow-through cells for high-throughput screening and temperature-dependent SAXS and WAXS studies. ...
Anton Paar

Temperature-controlled sample stages for multiple samples Anton Paar’s temperature-controlled sample stages, Heated Sampler or Heated/Cooled Sampler, enable fully automatic scans of up to 20 samples. Depending on the Heated Sampler ...
Anton Paar

Rotational speed: 2,000 rpm - 10,000 rpm
The knife mill GRINDOMIX GM 200 is perfectly suited for grinding and homogenizing foodstuff and feedstuff. It accepts sample volumes up to 0.7 liters and homogenizes substances with a high water, oil or fat content as well as dry, soft ...
Retsch GmbH

Rotational speed: 10 rpm - 50 rpm
PRODUCT ADVANTAGES PULVERIZATION OF LARGE SAMPLE VOLUMES The Drum Mill TM 500 is a laboratory ball mill designed to grind large sample volumes up to 35 l. It accepts initial feed sizes of up to 20 mm and can achieve grind sizes down ...
Retsch GmbH

Rotational speed: 6,000 rpm - 18,000 rpm
The high speed rotor mill ZM 200 easily and rapidly reduces the size of soft, medium-hard, fibrous and brittle materials with great efficiency. A wide range of accessories is available including various ring sieves, rotors, collection ...
Retsch GmbH

Highly reliable with minimal effort The SC1 automation unit for individual samples is available as heated version suitable for performing density measurements on samples which are solid at ambient temperature, such as paraffins, vaseline, ...

Highly reliable with minimal effort The SC30 sample changer with 30 positions is available as heated version suitable for performing density measurements on samples which are solid at ambient temperature, such as paraffins, vaseline, ...

Output: 300 g/min
A universal, compact and robust laboratory mill. Among other things, this solution is ideal for milling grain. Use this solution to process wheat, rye, barley, oats, rice and maize, as well as pseudocereals, pulses, spices, coffee, ...

Output: 200 g/min
Intended use This special mill was developed for preparing samples of grain for the Zeleny sedimentation test. This analysis provides you with reliable statements on the baking properties of flour and grain. Sedimat • - Fully ...

Rotational speed: 665 rpm - 820 rpm
This versatile mill shreds fibrous, tough and firm materials to adjustable degrees of fineness, enabling you to prepare sample material for further analyses. Brabender Rotary Mill • - Adjustable degrees of fineness • - Low-dust ...

The 919 IC Autosampler plus lives up to the standards of average sample numbers of laboratories. Moreover, Metrohm IC instruments' automation are enabled at full range with this instrument.

The 889 IC Sample Center from Metrohm is an advanced, efficient and precise automatic sampler that delivers a sample in a high throughput amount to various laboratory equipment pieces. Based on the x-y-z principle, it brings into operation ...

The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint and represent an economic ...
JULABO GmbH

JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint and represent an economic ...
JULABO GmbH

Power: 250, 200, 40 W
Maximum temperature: -20 °C - 30 °C
JULABO immersion coolers are primarily employed for countercooling open bath circulators to ambient temperature or below as well as for rapidly cooling liquids. JULABO immersion coolers have a small footprint and represent an economic ...
JULABO GmbH

Cold make-up water is heated up in the feed water cooling module by using the warm feed water in a heat exchanger. As a result of the feed water cooling down, there is a larger temperature difference between the water and flue gas in ...

Power: 40 W
Maximum temperature: 50 °C
Pressure: 10 bar
The SCC-C compressor type gas cooler is used to lower the dew point of humid sample gas to avoid condensation in the analyzers. An extremely stable and low gas dew point avoids water vapor cross-sensitivity and volumetric errors. Overview Integrated ...

Maximum temperature: 0 °C - 100 °C
Flow rate: 10 l/h - 120 l/h
Pressure: 0 bar - 16 bar
Stainless steel sampler coolers. Take boiler water samples safely. Suppresses flash steam ensuring an accurate sample. Description The Spirax Sarco SC20 sample cooler is used to cool samplesof boiler water or steam. The cooler consists ...

The AI/AS 1310 Series autosampler is ideal for gas chromatography liquid sampling with a range of 8-position system defined by to a 105 sample capacity autosampler . It is designed to comply with the QA/QC and high-throughput surroundings ...

The Thermo Scientific* TriPlus RSH Autosampler goes beyond sample injections to more complex sample handling cycles. It improves accuracy and repeatability and allows for a more flexible and productive GC and GC-MS sampling through controlling ...

Move to the simplicity of this X-Y-Z robotic autosampler. The Thermo Scientific™ TriPlus™ 100 LS liquid autosampler completely and reliably automates liquid injections regardless of matrix or selected technique. This autosampler has been ...

X travel: 1,500 mm
Y travel: 1,000 mm
Laser power: 3,000, 1,500 W
New design GF-1510 is a compact fibre laser cutting machine with a small footprint. GoldenLaser CNC compact fibre laser cutting machine is available with a bed size of 1000mm* 1500mm with power sources ranging from 1kW through to 4kW. ...

Our animal feed solutions help you produce top quality feed and to make economical use of your raw materials and energy. As a technology partner with long-lasting experience in the industry, we support you in every aspect of the production ...

The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. ...

Sampler MZEA/MZEF and Sample Collector MZEP/MZER Representative sampling is significant in grain processing and related fields, whether for maintaining consistent product quality or for creating retention samples. Bühler’s auto-matic ...

Automatic cleaning and rinsing cycles Customized sample handling Easy coupling to Schmidt+Haensch devices Wireless communication to laptops/tablet Handling of sensitive samples The SAMPLIFY P autosampler is the newest product in ...

Multipoint Sampler and Doser for Innova Photoacoustic Gas Monitors The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling ...

X travel: 1,300 mm - 1,500 mm
Y travel: 1,300 mm - 3,000 mm
Cutting speed: 0 m/s - 6 m/s
The perfect combination of cutting plate and cutting pipe! The Ninja turtle table type plasma 2 in 1 cutting machine by ARCBRO® is a innovative CNC plate & pipe cutting solution that comes in a small footprint. It can handle both metal ...

Power: 280 W - 2,500 W
Maximum temperature: -20 °C - 100 °C
Flow rate: 29 l/min
New budget-friendly and economically chiller range Many technical applications depend on a reliable cooling solution. Huber Minichillers and Unichillers are the ideal solution for environmentally friendly and economical cooling in laboratory ...
Huber Kältemaschinenbau AG

Maximum temperature: -25 °C - 100 °C
Flow rate: 20 l/min - 33 l/min
Pressure: 0.2 bar - 0.7 bar
The Minichiller is a compact and economic cooling solution which can be used in numerous laboratory applications. The model can save up to 48,000 liters of water in one working week. It is equipped with a large temperature indicator, ...
Huber Kältemaschinenbau AG

Maximum temperature: -20 °C - 40 °C
Flow rate: 25 l/min - 220 l/min
Pressure: 2.5 bar - 5.6 bar
Huber Unichillers offer better efficiency, stable pressure and delivery performance with a constant cooling water temperature compared to traditional tap water cooling. Chillers also reduce water consumption and help conserve the environment ...
Huber Kältemaschinenbau AG

These consumable items for metallographic purposes are designed for setting up with various metallurgical equipment in order to provide an enhanced performance in specific applications. Leco provides many types of consumables ideal for ...

STACK GAS SAMPLING SYSTEM The dry extractive SEC™ system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed ...

DIOXINS & FURANS PERMANENT SAMPLER Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system ...

AUTOMATIC SEQUENTIAL PARTICULATE SAMPLER Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The ...

Maximum temperature: -90 °C - 100 °C
Flow rate: 56 l/min
The XR AirJet Sample Cooler, available in -90C or -40C configurations provides sample temperature control for NMR, EPR and X-Ray diffraction using a mechanically refrigerated, temperature controlled air stream. House compressed air is ...
SP Scientific Products

Power: 60 W - 220 W
Maximum temperature: -100, -50 °C
The Flexi-Cool Low Temperature Immersion Probe is available in temperature ranges of -50C and -100C and can be custom configured to your application with one of our three standard coils. OEM inquiries are welcome. KEY FEATURES • ...
SP Scientific Products

Power: 1,500 W
Maximum temperature: -38 °C - 75 °C
Flow rate: 1.6 us gal/min - 4 us gal/min
The Maxi Cool Recirculating Chillers have a standard temperature range of -15 to +35C. The low temperature option increases the low end of the range to -38C and the high temperature option raises the high end of the range to +75C. The ...
SP Scientific Products

Representative test samples can be easily and reliably produced with HAVER Sample Splitters. These sample reducers form two representative partial quantities by means of alternately arranged dividers. They are available in two different ...

The HAVER RPT Rotating Sample Reducer produces representative sample quantities of solids and suspensions at the rate of 1:8, 1:10 or 1:30. It combines three dividing methods in one unit and provide the best possible sample reducing available ...

Power: 250 W - 1,200 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 35, 16 l/min
Circulation chiller for reliable continuous operation in laboratory and research applications from -10 to 40 °C The LAUDA Microcool line of user-friendly circulation chillers consists of four compact models with large LED display and ...

Power: 1,200 W - 10,000 W
Maximum temperature: -20 °C - 80 °C
Flow rate: 37, 28 l/min
Versatile 1200 W to 10kW circulation chillers used between -20 and 40°C for dissipating process heat in laboratories, mini plants and production facilities The LAUDA Variocool circulation chillers impress with their space-saving construction ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please specify:
Help us improve:
remaining