Sample preparation

Final grain size: 10 µm

... Our new model of the EXAKT G-LINE was designed for a versatile use in laboratories, comes equipped with a powerful drive, and the highest precision. From industrial research to cosmetics production, the G-Line disperses a wide variety of substances, ...

The GK VIBRA-DRUM® Lab Scale Grinding Drum is an energy-efficient, vibratory drum capable of breaking down materials more effectively. The unique attrition capabilities of the VIBRA-DRUM® make it ideal for offline testing scenarios to keep your production ...

... Field of Use Semiconductor Spectrophotometry, titration (potentiometric titration (alkalinity for tap water)), and analyzers with automated analytical methods such as Ion electrode method Available for distillation, heating and other processes enabling ...

X travel: 3,050, 8,130 mm
Y travel: 1,530 mm
Cutting speed: 100,000 mm/min

... It can cut stainless steel, carbon steel, galvanized sheet, electrolytic sheet, brass, aluminum, various alloy sheets, rare metals and other metals. 2021 best fiber laser metal cutting machine SMART-3015Plus has higher cutting speed and quality compared ...

Power: 425 W - 8,700 W
Maximum temperature: -40 °C - 30 °C

... The BV Thermal Systems Low Temperature Chillers offer continuous cooling with a temperature from -40° to +30°C. They are ideal for laboratories, and semiconductor, medical, pilot plants and custom applications that require accurate and precise ultra-low ...

... Dried blood spot sampling via FTD™ - a revolution for clinical and pharmaceutical sample processing The Dried Blood Spot Sampler (DBS) is a young technique for bioanalytics, especially valuable for clinical and pharmaceutical laboratories. The technique ...

Power: 1.3 W - 9.2 W
Maximum temperature: -10 °C - 30 °C
Flow rate: 13.3 l/min - 75 l/min

... RFW 352-253 serie INDUSTRIAL REFRIGERATORS COMPACT VERTICAL INDUSTRY automotive manifacturing plastic and rubber laboratory and analysis APPLICATION machine tools laser sources hydraulic and oleodynamic STANDARD FEATURES The RFW series ...

The cast-in bake/chill platen heater for semiconductor processing has essentially the same operating specifications as the cast-in bake platen with the addition of a cooling function. A precision formed cooling tube is added as an integral component to ...

Maximum temperature: 500 °C

Be­cause of the tem­per­a­ture peaks of 500 °C and higher that oc­cur in up­set op­er­at­ing mode, in most cases, Scheuch in­stalls an air/​air heat ex­changer up­stream of the bag fil­ter for gas cool­ing pur­poses. It is crit­i­cal that this sys­tem ...

Power: 2.3 kW - 35 kW
Maximum temperature: -25 °C - 200 °C
Flow rate: 10 l/min - 150 l/min

The whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic, and do not participate in liquid circulation, only mechanical connection, regardless of the temperature ...

The Isostack G4 is available in two versions: all in one (G4-one) and split (G4-two), both available with a 4 or 8 m3/h pump to meet different types of use.The functionalities of the software allow you to manage the sampling in an easy and intuitive manner. ...

Oxygen bomb combustion sample processing device is a pretreatment device for the analysis of non-metallic elements in organic samples. The samples are burned in a airtight pure oxygen system. The components to be measured are released from the sample ...

Circular saw blade diameter: 75 mm - 180 mm
Round piece diameter: 40 mm

... Micro-cutting machine dedicated to PCB and flat samples. A compact machine designed for cutting PCBs (Printed Circuit Boards) and flat samples. There are three modes of cutting: • Longitudinal mode: for sectioning PCBs • Fixed mode: for sectioning PCBs • ...

The gas cooler is used in gas analysis to lower the dew point of the moist sample gases.

Power: 50 kW - 250 kW
Flow rate: 7.2 m³/h - 46.2 m³/h
Pressure: 2.7 bar

... The chillers of the NP series are water-cooled modular units of different thermal powers ranging from 50 to 250 kw per single unit. The electronic management in the « master-slave multichiller » version allows the use of multiple units as if they were ...

... The Kjeltec™ 9 Analyser provides fully automated Kjeldahl analysis adding advanced digital capabilities to an already brilliant technology. Take advantage of fast turnaround time, improved data handling and less risk of human error for accurate results. Value Accurate ...

... About Halogen Material Combustion Unit Halogen Material Combustion Unit is designed to safely perform the combustion of samples with halogen content. This is a small unit that helps the preliminary process of determination of halogen content suitable ...

Power: 59 W
Maximum temperature: 0 °C - 40 °C
Flow rate: 2 m³/h

... The Apex Instruments TEC-4000Hg Thermoelectric Gas Cooler removes moisture and gas and is designed to be used with the XC-6000 Sorbent Trap Mercury Monitoring Systems for PS-12B. The TEC-4000Hg is mounted in a 19-inch cabinet with the XC-6000 and provides ...

... Sample preparation and dosage Automation from small to high throughput figures in desktop devices or robot cells. Magazine containers and samples, opening and closing of containers, dispensing of solids and fluids with different viscosities even ...

X travel: 110, 100 mm
Y travel: 300, 250, 420 mm
Z travel: 160, 230 mm

●The machine is a PLC controlled automatic metallographic sample cutting machine, X, Y, Z directions controlled automatically and precisely, intelligent cutting, the amount of feed can change depending on the material’s hardness, to achieve the fastest ...

Tube diameter: 150 mm
Weight: 160, 200 kg

... Machine dimensions:900x980x700 mm Case dimenisons(coolant system included):1400x1100x850 mm Motor:3 KW, AC,380 Volt, 3 phase,2840 rpm Cutting system:Automatic / Manual Table dimensions:T-slotted clamping table (370 x 173 x 20 mm) (1 pcs) Clamping ...

... Bravo Plus is the programmable version of the portable constant flow rate sampler of TCR Tecora. Bravo Plus is the programmable version of the portable constant flow rate sampler which incorporates a controller module with microprocessor. Its versatility, ...

Tube diameter: 100 mm

... JDQ100 Metallographic cut-off saw Main features: JDQ100 is an especially user-friendly abrasive cutting machine with manual cut-off. Opening the machine folds away the hood to the inside so that the whole cutting chamber is easily accessible. It has ...

... Main parameters: QG-3 Metallographic Sample Cutting Machine can be used in the cutting of general all-facies and lithofacies sample materials, which could guarantee the cutting of optimum samples under the safe conditions. The machine adopts the all-sealing ...

Output: 30 kg/h

The ball mill is designed for fine grinding of suspensions. It is a reliable alternative to the traditional (roller) system in the production of chocolate, fillings and glazes. Thanks to the special design of the ball mill, there are practically no "dead ...