Other lubrication equipment

Flow: 0 us gal/min - 12 us gal/min
Pressure: 0 bar - 7 bar
Weight: 3.9 kg

Depend on Versamatic’s ¾" (19mm) aluminum bolted metal air-operated double-diaphragm (AODD) pump for reliable use in lubrication, tire filling, adhesive dispensing, OEM systems and many more industrial applications. Featuring a patented non-stalling, ...

Flow: 0.02 l/min - 10.8 l/min
Pressure: 0.3 MPa - 1 MPa
Power: 0.2 kW - 0.75 kW

... Fluoroplastic used as the main material in joints.Most suitable for transporting strong acids, and can be used for chemical feeding process in various fields. Features of LK-TC series Chemical resistance The pump liquid ends are made from ...

... COSMO® CL-300.110 is a strong dissolving smoothening agent for the removal of scratchers, fissures and abrasive traces on non-transparent rigid PVC, PS, ABS, PMMA (Acryl). SPECIAL CHARACTERISTICS • strong dissolving • for PVC-hard white APPLICATION ...

Flow: 0 m³/h - 80 m³/h
Power: 0 W - 3,000 W

The FTP gear pump from Marzocchi is an ideal solution for low-pressure lubrication applications where low-viscosity fluids are required, such as fire-resistant ones. Typical applications include large lubrication systems, lubrication of the guides of ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... Flex­i­ble and pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new pump se­ries we in­tro­duce ...

... As components of pump-line-nozzle injection systems, conventional fuel injection valves ensure that when a defined opening pressure of the fuel supplied by the injection pump is exceeded, the fuel is injected very quickly in a uniform fine atomisation. Here ...

Flow: 10 l/min - 180 l/min
Pressure: 0 bar - 16 bar

... Applications: Circulation, lubrication and transfer The Std Line (standard) LPE pump comes in two executions; Lube Line and Fuel Line. The main difference is the shaft seal design; (V-Seal) - optimized for light duty and (T-Seal) - heavy duty respectively. The ...

Flow: 0 m³/h - 2,000 m³/h
Head: 0 m - 400 m

... Single stage, single suction, overhung, radially split, centreline mounted DISCHARGE & PERFORMANCE FEATURES • Full package compliance with API 610 & API 682 standards • Back pull-out casing to aid maintenance • Parts interchangeability between ...

Pressure: 170 bar

... -Grease gun for cartridges 215 x 50 mm and for loose grease (max. 400 ml) Single stroke output -Only a small portion of grease is pressed out with every push (appr. 4g) -Delivery includes a rigid nozzle -Tube (c = 116 mm) and a flexible high-pressure -Hose ...

If you are looking for a robust wellhead control system with a strong capacity for controlling components of an oil and gas well, then the DSTM with its two air driven double acting high pressure pumps and two tanks of 100 litres is the right solution ...

Flow: 1.8 m³/h - 91 m³/h
Pressure: 14 bar
Fluid temperature: -15 °C - 175 °C

... The 1124A Series™ internal gear pump with O-Pro® Seal technology is the perfect solution for adhesives, starch, polymers, and more due to it's reliable sealing as well as easy maintenance. Features & Benefits Rugged design provides superior performance ...

Flow: 65 m³/h
Head: 10.9 m

... Hydraulic Suspension Transformer Oil Pump Product Overview The shell of hydraulic suspension pump is composed of motor shell, pump body, components of junction box and sealing ring.The protection class of the whole pump can be up to IP67.The inner part ...

Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW

... Single shaft structure, safe and reliable, and has a service life which is over one times more than that of the multi axis structure. The maximum insertion length can reach up to 18m (including 3 meters of suction pipe). Excellent hydraulic model is ...

Flow: 0.03333 m³/s
Head: 2 m - 42.5 m
Power: 1.1 kW - 12.5 kW

... Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side). Suitable for construction site drainage applications. Submersible pump, with oil bath ...

... ​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Fast-evaporating, high-performance, solvent-based degreaser containing no ozone depleting solvents. Polar and non-polar solvents remove dirt, moisture and light oils.​​ Characteristics Fast Evaporation Rate No ...

... An injector delivers the material into the pipeline in pressure conveying systems. Injectors are an ideal, simple solution for small capacities. For larger capacities, a rotary intake unit is recommended. The Kongskilde TF Injectors TF 20, TF 40, and ...

Flow: 140 us gal/min
Head: 16.8 m

A superior commercial in-line pump based on the established Aurora Pump 320 Series has successfully met the severest demands of high temperature condensate service and boiler feed applications. The 326A in-line's rugged design is engineered specifically ...

... The system has the functions such as remote monitoring, remote automatic control, remote protection, remote measurement, remote signaling and remote video surveillance, etc. Product features -Remote control, fully unmanned operation of hydropower ...

Diameter: 2 mm - 20 mm
Operating pressure: -0.95 bar - 16 bar

... - Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) ...

Size: 500, 200, 400 ml

... Product Details
W8 8-function biodegradable multi-purpose lubricant: releasing, protective, lubricating, water-repelling, dielectric, antifreeze, degreasing, anticorrosive. W8 performs all 8 functions separately or altogether, therefore it is ...

Flow: 0 m³/h - 400,000 m³/h

... Overview
Lubretec pneumatic oil pumps use compressed air to transfer oils and lubricants in industrial environments. They deliver controlled, high-volume transfer through sealed systems that reduce contamination and support continuous operation.

Key ...

JAX Magna-Kote 467 FG is a metal-forming lubricant with exceptional metal-wetting characteristics and provides improved finish, minimizing burning and preventing loading of forming components. Developed specifically for use in can-beading and can-flanging ...

Size: 32, 40 ml

... DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, ...

Our dielectric fluids have allowed our users with EDM Machines to increase amperage, thus reducing process times by as much as 30%. Also, they create a non-conductive channel allowing the spark to hit its target accurately and at a full charge. It has ...

Flow: 8 m³/h - 37 m³/h
Head: 7 m - 40 m
Power: 0.75 kW - 7.5 kW

submersible pump is a vertical single-stage single-suction centrifugal pump structure. This series of pumps is a semi-open impeller. A stirring blade is provided at the extension of the impeller suction side. A cutter that can crush fiber weeds is installed ...