- Materials - Tools - Components >
- Lubrication >
- Other lubrication equipment
Other lubrication equipment
Lubricating stick for rotating or stationary cutting tools, grinding wheels and belts. Reduces heat build-up in belt, disc and wheel grinding applications. Apply directly to tool or work area for instant lubrication.
Accu-Lube (ITW)
Flow: 26 l/min
Pressure: 2 bar
Power: 80 W - 350 W
The eOP is a high power density cooling pump developed for oil cooling and lubrication applications in the market. It targets high flow low pressure conditions from the hydraulic perspective and includes a G-rotor pump, a brushless DC ...
Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C
Continuously operated equipment calls for reliable components. Whether in lubrication oil applications or in processing plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump ...
Maag Germany GmbH
Size: 500 ml
The IBS chain and rope spray VivaLub was specially developed for the use of permanent internal and external lubrication of fast or slow running drive elements. Ideal for heavy duty use of e.g.: Motorbike and bicycle chains, gear wheels ...
IBS Scherer
Flow: 21 m³/h
Pressure: 25 bar
2CY gear pump uses: It is suitable for conveying lubricating oil or other liquids with similar properties and lubricating oil without solid particles and fibers, whose temperature is not higher than 300 C, viscosity is 5×10 - 6 1.5×10 ...
Hebei Hengsheng Pumps Co., Ltd.
Flow: 0.15 m³/h - 13.5 m³/h
Lubrication Oil Gear Pump Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTX” (Gear Pump, Lubrication Oil Gear Pump) which is most efficient and economic range of flange and foot mounting type positive displacement rotary ...
Fluid Tech Systems
Flow: 1,135 l/min
Pressure: 0 bar - 400 bar
Heavy duty reciprocating pumps with vacuum jacketed cold end Available in simplex and triplex execution with oil lubricated crank drive or geared motor Suitable for intermittent or continuous duty
Flow: 10.5 l/s - 400 l/s
Head: 25.4 m - 94.2 m
ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large capacity, high head, multi-stages ...
Pressure: 400 bar
81818/P Air-operated pumps for dispensing grease at short distances or for forced lubrication. Compression ratio 50:1. 16 kg drums
Ompi Srl
• Monitoring and automatic maintaining of the optimal oil level in each compressor sump of multi-compressor refrigerating and air conditioning installations.
Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m
DESIGN Thanks to a special impeller designs (X Type Free-Vortex Impeller, S Type Single Vane Impeller and D Type Double Vane Impeller) this series is used different fields and different kinds of waste can be pump depending on the ...
MAS - DAF
This product is only available to: Professional Lubricant on the basis of silicone, for the smoothing of each sensitive mechanism. Preventing rubbers to dry out and gives a glow on plastic and vinyl. Anti-corrosion and damp resistance ...
Flow: 0 m³/h - 27.6 m³/h
Pressure: 1 bar - 16 bar
Head: 0 m - 16 m
triple screw pump is compact and can be supplied with either an AC motor or DC motor. It can be utilised for many cooling and lubricating applications involving mineral oils, lubricating oils and hydraulic oils ranging in viscosity from ...
The DI model horizontal multi-piston volumetric injector from GEA is the perfect high capacity machine for side filling pastries, eclairs or bread buns. The system can inject jams, creams or chocolate at ambient or controlled temperatures, ...
COMAS SPA
Flow: 30,000 m³/h
Pressure: 2.5, 3.75 MPa
Fluid temperature: 105 °C
HS(V)type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990’s 20th century. Application Area HS(V) type series ...
Sanlian Pump Industry Co., Ltd
Flow: 45, 10 l/min
Pressure: 160, 175 bar
Length: 1,750 mm
Perfect mixing, a tank volume of 2.000 l, high delivery rate and pressure. The BMA 2000 is used for pilot tube jacking and the lubrication of temporary casings and carrier pipes. An additional application is the lubrication and loosening ...
Diameter: 8, 6, 10, 4 mm
Operating pressure: 0 bar - 300 bar
FD is a new generation fittings,the fitting has been created and developed to be used in the lubrication systems,our FD push-in fitting can stand up to a maximum of 300 bar pressure. The general purpose POOLKE plug-in connector system ...
Ningbo Parmicro Fluid Technology CO.,LTD
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning ...
Flow: 30, 20, 60, 40 l/min
Pressure: 16 bar - 20 bar
Power: 3.81, 2.6, 1.3 kW
The electric piston pumps of the tim®ECO series have been especially developed for larger paint supply systems. In addition to a small, compact design, which allows integrating the pumps without significant effort, especially in retrofit ...
Flow: 0 m³/h - 36 m³/h
Head: 0 m - 60 m
Power: 0 kW - 3.7 kW
State-of-the art compact design Easy and simple to install User-friendly operation Quiet running Reliable and robust construction Back pull-out design which simplifies inspection and maintenance Rotating parts are balanced by design ...
Designed for engine or mechanical parts prior to their assembly. Made of natural colloidal graphite and is an ideal lubricant when petroleum products must be avoided. Excellent choice for extreme temperature lubrication; between -100°F ...
The Resilient Seat Lubricated Plug Valves is of the "block" or complete shut-off type. It may be used for throttling where accurate adjustment is not necessary. But the primary service is positive open-close operation. Three basic ...
H1 Quinplex® Penetrating Oil & Lubricant (4059 aerosol) Meets NSF H1 requirements for incidental food contact Is certified Kosher Pareve Provides superior anti-wear performance, including R & O resistance Penetrates and coats Protects ...
Lubrication Engineers
Flow: 4 m³/h - 96.7 m³/h
Pressure: 0.6, 1, 0.8 MPa
Power: 1.03 kW - 45 kW
LQ3G asphalt heating hot oil pump is used for transport of viscous fluids with lubricating properties. They are suited for a variety of applications such as fuel-injection, oil burners, boosting, hydraulics, fuel, lubrication, circulating, ...
Zhejiang Yonjou Technology Co., Ltd.
Size: 16, 1 US fl oz
MaxShine Car Coating Mist is the perfect product for detailing enthusiasts looking for a versatile, daily detailing product without build up. It improves gloss and shine and removes spots, streaks, or fingerprints. It can be used on traditional ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining