Other lubrication equipment

The TPL503 SYSTEM (control unit BB211 + sensor TPL503) represents the Innovation 4.0 for the protection of hermetically sealed oil transformers. The classic electromechanical control devices are replaced by the electronic sensor TPL503 ...

Diameter: 0.25 mm
Operating pressure: 1,160 psi

The push-in fittings of the PM line are manufactured according to the American Standards (inch Tubings and NPT threads). They are conceived to work up to 1,160 psi in central grease applications. The push-in fittings of the PM line ...

Diameter: 4 mm - 6 mm
Operating pressure: 250 bar

High Pressure Push-in Fittings, 250 bar HP is a new generation fitting studied to guarantee tightness with pressure ranges, considered so far “out of reach” with the push-in version. The fitting has been created and developped to be ...

Diameter: 4 mm - 8 mm
Operating pressure: 40 Pa - 150 Pa

MP is a push-in fitting conceived for Medium pressure grease applications up to max 80 bar. MP completes, with its technical features the exhisting products offer for central lubrication applications and highlights further the distinguishing ...

Size: 182 ml

Using Perfect-Straw™ with Low-Volume Valve Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes). Formulation: 5% DeoxIT® (active ingredient), 75% odorless mineral spirits (carrier ...

Size: 182 ml

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes). Includes integrated smaller diameter red straw and 24″ extension tube. Formulation: 5% DeoxIT® (active ingredient), 75% odorless ...

Size: 133 ml

Applicator: Non-Flammable Spray, provides precise control and application of DeoxIT®. Quick-Dry, Non-Drip Solvent. Formulation: 5% DeoxIT® (active ingredient), 75% Solstice PF (carrier solvent), 20% propellant Use: Solvent evaporates ...

The XenoWorks® Digital Microinjector is designed primarily for transgenic mammal workstations and adherent cell, C. elegans, drosophila, zebrafish, xenopus and sea urchin injections. It is capable of holding oocytes and embryos while ...

The Manual Injector represents a manual syringe driver is extensively used for pneumatic or hydraulic control of injection needles or holding pipettes. They prove suitable for injecting volumes in the nanoliter to microliter range. It ...

The HDJ-M3 microinjector from PrimeTech is a manual water/oil type pressure injector. The HDJ-M3 will allow you to inject spermatozoa, DNA and/or other solutions into somatic cells, unfertilized eggs or embryos. Manual operation with ...

Miller-Stephenson’s MS-260 Glass Cleaner is a high-quality cleaning solvent specially formulated non-streak cleaning of glass. Excellent for use on dials, gauges, and oscilloscopes. Also recommended for aircraft windshields. Contains ...

Vydax NRT 960 is a non-flammable, translucent dry film coating that exhibits unique lubrication and anti-stick properties while providing the end-user with a clean, non-oily, nonstaining, a chemically inert coating that functions in continuous ...

The MS-270 Multi-Surface Cleaner utilizes a 70% Isopropyl Alcohol (IPA) / 30% UV-sterilized, deionized water-based formula. The MS-270 is an extremely efficient cleaner ideally suited for removing a variety of contaminants from various ...

DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C

Valve NBZ-5 is a nebulizer of liquids with venturi effect operation and adjustable spout by means of a knurled ring. It is especially suitable for following uses : Lubrication of machine members. Lubrication and cooling of tools for ...

Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar

The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and a maximum pressure ...

Size: 400 ml

Prevents pick-up and seizure Excellent water resistance, even when submerged Designed for use on all static fasteners and mechanisms prone to seizure Excellent temperature range of -10ºC to +1100ºC Coefficient of friction 0.15 ANTI-SEIZE ...

Prevents galling, pick-up and seizure Resistant to high loads (up to 7,000 kg/cm2) Excellent wear resistance Ideal for applications where a totally dry film lubricant is required Temperature range -50ºC to +450ºC High purity, extreme ...

Size: 400 ml

Sub-micron PTFE coats surface to prevent wear and extend equipment life The dry film spray lubricates where wet lubricant cannot be tolerated, e.g. dusty environments DRY PTFE Spray acts as a non-staining, anti-stick agent; ideal for ...

Berutox VPT 64 Fluid is a fully synthetic special fluid for the lubrication of kinematic components as well as gold-coated sliding and pressure lift-off contacts of microswitches. Industries Automotive industry Examples of application Especially ...

Operating temperature: -5 °C - 160 °C
Viscosity: 0.00049, 0.000032 m²/s

Berutox M 21 EPK 420 is a particularly strongly adhesive fluid grease for heavily loaded gears, rolling and plain bearings. Examples of application Heavily loaded spur and worm gears of low circumferential speed exposed to high temperatures Heavily ...

Berulub VPN 13 Ringlub is a high temperature fluid for loose running rings, large link chains or sliding guides. Berulub VPN 13 Ringlub is characterized by a very high auto-ignition temperature of 400 °C. Industries Cement industry, ...

Flow: 0 m³/h - 85 m³/h
Pressure: 0 bar - 370 bar

The ClydeUnion Pumps reciprocating power pumps are designed with exceptional versatility to efficiently meet the requirements of a wide variety of pumping applications. These units are ruggedly designed for minimum maintenance and to ...

Flow: 460 l/min
Head: 39 m
Power: 0.18 kW - 5.5 kW

In the UP-Do Pump Series, the motor power is transmitted without slip directly to the pump impeller with a rigid shaft (no magnetic coupling). A double mechanical seal (back to back) prevents the leakage of the media to be pumped and ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, size of solid particles, shape ...

Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C

The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven gear pump that ...

Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C

VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR - 3L OUTLET THREAD ...

Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C

VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING TEMPERATURE RANGE ...

Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW

The specific feature of the LK series ist the dual-cam driving section with a highly reliable worm gear type speed reducer. Achieving maximum wear resistance in continous operation was a goal of the construction. The result is the employed ...

ALWA release lacquer is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend ...