Pipe and hose accessories

Diameter: 2 in - 60 in

Sawyer’s Hand Lever Cage Clamp uses a manual toggle to easily align pipe. Each clamp fits one specific pipe diameter from 2″ to 60″. These clamps will align pipes through Schedule 80 but are not intended to reform. Jack Screw Wedges and Hi-Lo Wedges are ...

... A kit of the most commonly used adapters so that you have what you need in the field • 1/8" Male NPT Adapter, Brass: 1/8" male NPT x male Quick-test, no check-valve, brass • 1/8" Female NPT adapter, Brass: 1/8" female NPT x male Quick-test, ...

Diameter: 1 in - 5 in

... Based on customer need, LEFON presents the latest Band Saw Guide / Saw Vise design. This Saw Guide/Saw Vise/Cutting Block adopts rugged hard facing,heat treatment to ensure durability and convenient usage. Tube size and pipe size Saw Guide/Cutting block ...

Supply pressure: 3.5, 17 bar

The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to ...

Supply pressure: 200 psi

The Conoflow GH22/42 Series Flow Boosting Relay is used to boost, amplify or reduce the pneumatic signal of a controller or similar instrument in a predetermined ratio. Using an independent supply pressure for greater flow volume, the unit relays an instrument ...

... Reduces Material Plugging The SUPERSLIK segmented abrasion resistant tubing bend represents an advanced design to improve conveying line flow characteristics when conveying dry bulk solids. Its special design provides a pressure relief across the entire ...

... Directly connects a tank to a mains supply simply and securely JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a maximum wall thickness of ...

... Hydrogen Transportation Pipeline RTP (Reinforced Thermoplastic Pipe) is a multi-layer composite solution with a thermoplastic liner, reinforcing layer, and outer sheath, ensuring safe and cost-effective hydrogen transport. Today, we are witnessing a ...

Hose diameter: 0.5 in - 12 in

... Aerre Inox manufactures and commercialize clamp and butt weld fittings for sanitary installations in the pharmaceutical, biotechnological, cosmetic, food & beverage and chemical sectors. Clamp fittings are a fast and extremely secure union system for ...

... FITT Sewer ICE, the new pipe for pressure sewer systems and gravity manifolds, is the first unplasticized Poly Vinyl Chloride (PVC-U) pipe with both UNI EN 1401 and UNI EN ISO 1452 certification. Features: • Ice crystal: feature that confirms its particular ...

Diameter: 12 mm - 48 mm
Length: 62 mm - 144 mm

... Adjustable adaptors acc. to DIN6327 Application: for drilling, counterboring and reaming Machine type: drilling spindle heads/holders acc. to DIN55058 Shank: inner morse taper DIN228 for drilling and counterboring tools with morse taper The ...

Hose diameter: 0.375 in - 0.875 in

Clamp has a 1/2″ stainless steel band with plated 5/16″ slotted hex head screw and housing. Recommended for most applications. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision ...

... High Pressure Flexible Hydraulic Hoses High Pressure hose is supplied assembled and to lengths indicated. Lengths are measured from end of coupling to end of coupling. Hose is 3/8" ID and available in 4000 psi or 7000 psi rating. 3/8" female tubing fittings ...

... Reduce the Negative Effects of Water Hammer The noise from banging pipes when a water faucet is suddenly closed or an appliance shuts off quickly can be annoying but more importantly it can cause serious damage. Our newly redesigned Series 15M2 Water ...

... On machine tools with pallet changing systems, the coupling elements transfer hydraulic oil or compressed air from the machine table to the hydraulic clamping fixture. Description The coupling mechanism and the coupling nipple are provided with axial ...

The reducers are manufactured in compliance with the DIN 11852 standardds. It has nominal sizes that varies from DN 15/10 up to DN 200/150. These are made from AISI 316L (1.4404) components. And has an external appearance of matt, electro polished and ...

Diameter: 17 mm - 219 mm

... Stainless steel pipe clamps by VLS Components are available in the economical version (with side screws) and in the hinge version. Suitable for pipes ranging from 17 to 219 mm and supplied with all the necessary screws. VLS Components produces a wide ...

... STI series Derivative Booster is used in conjunction with a positioner on a control valve to increase stroking speed. It has been designed to pressurize on cylinder's chamber and discharge the other simultaneously. In this way, an high stroking speed ...

... Description The Fast Piezo shutter developped by CEDRAT TECHNOLOGIES in collaboration with EMBL (Dr. Cipriani) is based on standard amplified piezo actuators with a special optical head. It provides a compact and low jitter shutter solution for X ray ...

The Mott GSMR Series surface mount flow restrictors support the 1.125” high-flow C-Seal configuration gas systems. These restrictors are assembled and tested in a Class 100 clean room environment, and are mounted between the substrate and another two-port ...

The Drum lifting clamp can carry a maximum load of 800 kg. It has safety lock and adjustment of grab width by set-screw. Lastly, it is used for transport of standing barrels and drums and it comes with cover beading.

Rubber flexible tubes must be supplied in coils (max. length 15 mt) with the fittings loose, for assembly in the desired lenght, on the customers promises.

This coupler is ideal for lubricating agricultural, construction, industrial, trucking, automotive and commercial lawn equipment – anywhere a grease gun is operated. The Lever-Action Coupler provides easy attachment and removal from the fitting. Its excellent ...

Diameter: 25 mm - 127 mm
Temperature: -260 °C - 750 °C

This high temperature knitted sleeve is constructed of 100% basalt yarn, which provides excellent thermal protection and will withstand continuous exposure to temperatures of up to +750°C. When installed on vehicle exhaust tubes and pipes, the sleeve ...

Diameter: 16 mm - 110 mm
Length: 31 mm - 106 mm

... Connections - solvent socket – female thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission ...