Pipe and hose accessories

... Estimated to ship within 5 business days Bulk pricing. Must be purchased in quantities greater than 250 Details Short Coupling, #10-32 Notes For coupling cylinders directly to valves, and many other coupling arrangements. See Catalog: Page 321 Additional ...

Diameter: 19 mm - 65 mm

... Nylon Adapters from metric external thread up to PG internal thread and from PG external thread up to metric internal thread. This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Std. Color: ...

Diameter: 20 mm - 65 mm

... These components enlarge the threaded entry diameter on any threaded interface from a smaller to larger thread size in order to accept a suitable gland. Configuration: From small external Metric to large internal Metric and from small external PG to ...

Diameter: 14 mm - 65 mm
Length: 16 mm - 33 mm

... This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Used to adapt from EN 60423 metric external thread up to DIN 40430 PG internal thread and from DIN 40430 PG external thread up to EN 60423 metric ...

Air Flow Amplifiers deliver a large airflow for conveying, drying, cooling or ventilation. These high flow, bladeless blowers have no moving parts so they are inherently safe. They amplify compressed air volumes by 12 – 20 fold in ducted applications. ...

Air Flow Amplifiers deliver a large airflow for conveying, drying, cooling or ventilation. These high flow, bladeless blowers have no moving parts so they are inherently safe. They amplify compressed air volumes by 12 – 20 fold in ducted applications. ...

Air Flow Amplifiers deliver a large airflow for conveying, drying, cooling or ventilation. These high flow, bladeless blowers have no moving parts so they are inherently safe. They amplify compressed air volumes by 12 – 20 fold in ducted applications. ...

Width: 0.062 in - 0.22 in

The single wire concentrates the clamping force in one specific area around the hose to give the most effective holding force and clamping strength.

Width: 0.082 in - 0.142 in

A slimmer version of the single wire hose clamp. The single wire concentrates the clamping force in one specific area around the hose.

Width: 0.039 mm - 0.137 mm

A cost-effective choice for applications where a lower clamping force than offered by single wire clamps is sufficient and aesthetics are important.

... ADT103-NPT - 1/4" NPT male to various female hand-tight quick connectors (10 pc). ADT103-BSP - 1/4"BSP male to various female hand-tight quick connectors (10 pc). ADT103-M20 - M20X1.5 male to various female hand-tight quick connectors (10 pc). Designed ...

... 1/4HP male (Autoclave M-250-C) to various connectors Designed for Additel 949, 959, and 960 pumps Can be ordered as an entire kit or as individual parts (see datasheet) ...

... Enlarger : Nickel Plated Brass O-ring : NBR Connection thread : Metric (EN60423)/PG (DIN 40430) Protection class : IP68 Properties : Enable to use cable glands with bigger connection threads than the existing threaded holes ...

... Adapter: Nickel Plated Brass O-ring: NBR Connection thread: Metric (EN60423)/PG (DIN 40430) Protection class: IP68 Properties - Adapter from metric outer thread to PG inner thread - Enable use of PG accessories in metric threads ...

... Type: AP TYPE ADAPTER Protection code: I M2 Ex db I Mb / I M2 Ex eb I Mb II 2G Ex db IIC Gb II 2G Ex eb II Gb II 1D Ex ta IIIC Da Certificate: IEP 15 ATEX 0333U Material: Brass, brass with nickel plated, stainless steel Standards: EN 60079-0 ...

... . Bore Ø: 6, 10, 20, 30, 40 mm . Flow rate: between 200 et 5000 Nl/min . Material: Aluminium By virtue of the COANDA effect, the motor flux draws in air at room temperature. This physical phenomenon greatly amplifies the flow which results in very ...

... Air Amplifiers, with the COANDA effect, MD series Presentation . 2 models . Bore Ø : 25, 38 mm . Flow rate : between 2015 and 4370 Nl/min / between 82.95 and 152.95 SCFM . Material : Aluminium By virtue of the COANDA effect, the motor flux draws ...

Orifice Restrictors are the simplest method of flow control and are one of Air Logic's best-selling product lines. Also called Precision Orifices or Flow Restrictors, they work on the principle of flow restriction by orifice diameter. The size is identified ...

Filtered orifices build on Air Logic's orifice product line with additional protection of an integrated filter. Orifices work on the principal of Flow Restriction with the orifice diameter being identified in the part number and by color codes assigned ...

Diameter: 1 in - 6 in
Operating pressure: 0 psi - 20,000 psi

Trusted by leading oil and gas equipment manufacturers, operators and contractors, DSTI's HPI swivels maximize uptime while lowering operating costs by increasing the service life of drape hoses on vessels with dynamic positioning systems. This is done ...

Diameter: 88 mm - 1,219 mm

... External Pipe Alignment 80% of the root pass can be achieved without loosening the centering Pipe range OD: 3 - 48 inch Available in a light, medium-duty (with bridges) and medium-duty (without bridges) version For tacking or pipe centering Our ...

Diameter: 323 mm - 2,032 mm

... For pipes up to 80 inch 90% of the root can be welded Pipe range OD: 12 - 80 inch Available in a medium, heavy and Edge misalignment can be eliminated by means of jackscrews The air gap can be adjusted by means of chisel Our Hydraulic External ...

Diameter: 10 mm - 140 mm

... Each pipe side is centred by means of a crank Can align different pipe diameters with each other 2 types available, for pipes from 0,3 - 5,5" Stainless steel contact points to avoid corrosion The practical double external pipe clamp can center and ...

Diameter: 8 mm - 100 mm
Length: 25 mm - 87 mm

... MALE / MALE REDUCER - STAINLESS STEEL 316L Inox 316L usiné EXAMPLE OF ORDER : 652413-86 ...

Diameter: 8 mm - 50 mm
Length: 26 mm - 57 mm

... FEMALE / MALE ADAPTER - STAINLESS STEEL 316L (Model : 5243) ...

Diameter: 6 mm - 80 mm
Length: 25 mm - 65 mm

... FEMALE / MALE REDUCER - STAINLESS STEEL 316L (Model : 5238) ...

DN: 20 mm - 250 mm

... Product
45° elbow for solvent cement jointing, model EY50, metric series made of UPVC.

Product details

• Brand: U-PVC PRESSURE FITTINGS
• Category: Metric series for solvent cement jointing
• Material: UPVC
• SKU:

DN: 0.5 in - 2.5 in

... Product name
ELBOW THREADED 90° EL51 UPVC

Short description
90° threaded elbow for UPVC pressure piping systems with BSP parallel threaded connection. Designed for PN16 pressure class; available in multiple standard sizes.

Product ...

DN: 75, 110 mm

... Short description
ACCESS BRANCH 87.5° for drainage systems. BR41 is a rubber ring joint designed to create an access branch at 87.5° between drainage pipes.

Product details

• Brand: TADO
• Category: Drainage Rubber

Diameter: 20 mm - 200 mm
Operating pressure: 0 bar - 200 bar

...

• Stainless steel material

• Hardened inner sealing surface

• Special design sealing components

• Easy changable repair parts

• All flage types are aviable DIN, ANSI

Diameter: 20 mm - 200 mm
Operating pressure: 0 bar - 20 bar

... Swivel Joint for water, hydraulic oil and chemical fluids, with carbon steel material, flanged. Media Type Water General Purpuse, Hydraulic Oil Max.




Speed 20 RPM Max.
Pressure 250 Bar Max.
Temperature 120 C
Rotor Size 1/2 ...

Diameter: 12 mm - 125 mm
Length: 100, 50 m

Hose Guard Nylon Protective Sleeve is woven from thousands of high tenacity multi-filament nylon yarn which has excellent abrasion resistance, UV resistance, chemical resistance, and dustproof. This smooth-bore sleeve is easily installed over hose, chains, ...

The sleeve of the Firesleeve with Velcro Hook Loop Closure is made from knitted high bulk fiberglass and coated with high quality silicone rubber, allowing it to provide maximum protection for hoses, cables and wires against heat and flames. The Velcro ...

Diameter: 19 mm - 305 mm
Temperature: 260, 1,205 °C

... Fire Résistant Firesleeve With Velcro Hook And Loop Fire Résistant Firesleeve With Velcro Hook and Loop fastener is made by silicone fiberglass fire sleeve and adding a hook & loop closure. The hook & loop and thread can be standard polyester and nylon. ...

Model ALF, L-Style Water Hammer Arrestor, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves. This device protects against annoying and potentially damaging ...

... Model AIT / AIF, I-Style Water hammer arrester, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. This action protects ...

Modle AXT, a Water hammer arrestor for household application are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. This action protects against annoying ...

Diameter: 6 mm - 600 mm

... Tube clamps are designed for quick and easy mounting on pipes in hydraulic systems using weld plates Helps in reducing vibration and noise in pipelines, which increases system life and performance. Enables neat and structured pipe installation, ...

... Description
Gamma-irradiated single-use assemblies designed for biopharmaceutical manufacturing. Assemblies range from simple tubing with connector to complex manifold assemblies with multiple connections. Components are manufactured and assembled ...

Introducing our Custom Thread Adapters: precision-engineered, CNC-machined connectors designed to seamlessly bridge mismatched threads in industrial assemblies. With secure internal/external threads and optional pin holes, these tailored components ensure ...

... Overview
This Pum lantern cast is a precision-cast pump‑motor connector designed to mount Type 132 motors to 180/230 series pump bodies. Produced by precision casting and multi‑process machining, it meets ISO 2768-mK general tolerances and provides ...

Introducing our Hexagonal Internal Thread Adapter, a precision-engineered solution for seamless connections in hydraulic, pneumatic, and fluid systems. Crafted from high-grade CNC-machined stainless steel, its corrosion-resistant hexagonal body allows ...

... Product Overview
These QCSPL-S shaft locking clamps provide rapid, positive locking of a shaft without tools. Push-handle actuation clamps the shaft in position; releasing the handle allows a spring to return the clamp to free movement. ...

Width: 35 mm - 45 mm

... Product overview
Pneumatic shaft-locking clamps PSLC-L are designed for quick-change applications to secure sliding shafts and spindles after positional adjustments. The unit uses spring clamping when air is removed and pneumatic unclamping ...

Width: 35 mm - 40 mm

... Product description
Pneumatic QSCA-N shaft-locking clamps are automated quick locks designed for machine changeover and positional locking of sliding shafts and spindles. The mechanism uses spring clamping when air is removed and pneumatic ...

... Push-in fitting type fixed orifice joint. It controls air flow. Orifice bore:Selectable from φ0.1mm to φ2.0mm in increment of 0.1mm. Can be installed in tight space. M5x0.8 thread is introduced in mini type fitting that makes compact piping possible. Low ...

... Push-in fitting type fixed orifice joint. It controls air flow. Orifice bore:Selectable from φ0.1mm to φ2.0mm in increment of 0.1mm. Can be installed in tight space. M5x0.8 thread is introduced in mini type fitting that makes compact piping possible. Low ...

Diameter: 4 mm

... Product Description adapter pluggs 4mm for electrofusion tools ...

DescriptionElectropneumatic guillotine dampers designed for control, shut-off and dosing of powder or granular materials. Compact footprint and a functional blade sealing system minimise product escape, ensuring duct closure except in the blade passage ...

Hose diameter: 8 mm - 20 mm
Width: 16, 20, 25, 30 mm

... Rail clamp mountings KGR are made of drawn aluminum profiles and have slitted clamping points machined by cutting methods. The holes in the clamping points are arranged at an angle of 90 degrees or parallel to each other. They are used for applications ...

Hose diameter: 8 mm - 20 mm
Width: 16 mm - 30 mm

... Rail T-clamp mountings TGR are made of drawn aluminum profiles and have a slitted clamping point machined by cutting methods. The clamping point bore is T-shaped relative to the bolt and to the bore on the opposite side. They are used for applications ...

Diameter: 30 mm

... Swivel clamps LSQ.P of glass fiber reinforced polyamide have a slitted clamping point. The fastening lug is smooth or has a crown serration that may be countersunk or raised. The fastening lug is centered and perpendicular to the axis of the bore, ...

Mechanical Flange Spreader MSW9TEX with spreading force 9,4 t (94 kN) is mechanically operated using the supplied torque wrench. These tools are used in common installation, commissioning and maintenance processes, such as the replacements of valves and ...

Mechanical Flange Spreader MSW9TEX with spreading force 9,4 t (94 kN) is mechanically operated using the supplied torque wrench. These tools are used in common installation, commissioning and maintenance processes, such as the replacements of valves and ...

... Hydraulic Flange Spreader HSW15TSCEX with spreading force 14,5 t (145 kN) is actuated via the integrated hydraulic pump. These tools are used in common installation, commissioning and maintenance processes, such as the replacements of valves and gaskets. ...

Diameter: 50 mm

Diameter: 50 mm

Diameter: 50 mm