Pipe and hose accessories

Diameter: 20 mm - 125 mm
Length: 19 mm - 61 mm

... Product overview
RP20 reducing piece (male/female) for uPVC pressure piping, designed for the metric series intended for solvent cement jointing. Available in multiple diameter combinations and pack groupings; typical pressure class PN 16 depending ...

Diameter: 110 mm - 225 mm
Length: 86 mm - 119 mm

... Product
Reducing socket for solvent-cement joining, model RS10, U-PVC PRESSURE FITTINGS.

Key information

• Brand: U-PVC PRESSURE FITTINGS
• Material / Family: U-PVC (U-PVC Pressure Fittings)
• Series / Category:

DN: 20 mm - 250 mm

... Product
45° elbow for solvent cement jointing, model EY50, metric series made of UPVC.

Product details

• Brand: U-PVC PRESSURE FITTINGS
• Category: Metric series for solvent cement jointing
• Material: UPVC
• SKU:

Model ALF, L-Style Water Hammer Arrestor, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves. This device protects against annoying and potentially damaging ...

... Model AIT / AIF, I-Style Water hammer arrester, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. This action protects ...

Modle AXT, a Water hammer arrestor for household application are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. This action protects against annoying ...

Diameter: 19 mm - 65 mm

... Nylon Adapters from metric external thread up to PG internal thread and from PG external thread up to metric internal thread. This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Std. Color: ...

Diameter: 20 mm - 65 mm

... These components enlarge the threaded entry diameter on any threaded interface from a smaller to larger thread size in order to accept a suitable gland. Configuration: From small external Metric to large internal Metric and from small external PG to ...

Diameter: 14 mm - 65 mm
Length: 16 mm - 33 mm

... This component alters the threaded entry diameter on any threaded connector with incompatible thread forms. Used to adapt from EN 60423 metric external thread up to DIN 40430 PG internal thread and from DIN 40430 PG external thread up to EN 60423 metric ...

... Various sizes and designs (see details) • KT1,  Clamping opening 25mm,   M6 Thread,      Steel               (Art.# 5.140) • KT1,  Clamping opening 25mm,   M6 Thread,      Aluminium     (Art.# 5.142) • KT2,  Clamping opening50mm,   M8 Thread,      ...

CAN bus speed adapter for the COMPACT system. It is used in installations with COMPACT-E units and CAN peripherals (MD-30C, ME-200C, NS-CAN ...), adapting the communication speed of the slave matrix (500 kbit/s) to the communication speed of the peripherals ...

... Universal PROFIBUS Interface with USB High Speed High performance PROFIBUS USB interface for a wide variety of tasks from network configuration and device parameterization to plant maintenance and production data acquisition. Handy Companion for ...

DN: 40 mm - 200 mm

... Material of the elbow - Steel DIN 2448 St 37, primed Design of the inner layer - coated Material of the inner layer - Polyurethane Properties Colour - Colour of lining natural beige Other - Lower operating costs due to longer maintenance intervals, ...

Hose diameter: 40 mm - 900 mm

... Screwable clamp for attaching all hose types from the Master-Clip series to mobile and stationary systems Specification of the connection solution - largely tension-resistant and largely leak-proof connection due to bridge profiles Clamp Design ...

Hose diameter: 75 mm - 507 mm

... Special clamp for attaching all hose types from the Master-Clip series to mobile and stationary units. Construction / Material Specification of the connection solution - largely tension-resistant and largely leak-proof connection due to bridge profiles, ...

Diameter: 4 mm

... Product Description adapter pluggs 4mm for electrofusion tools ...

Hose diameter: 30.5 mm

Interconnect the air rod to its flat or round conductor.

Down Conductor fixing on tube. Self-locking collar which is permanently tightened around its support thanks dedicated pliers (ref P6060).

Used to maintain conductor on tube. The collar is held in place by screwing.

Hose diameter: 8 mm - 20 mm
Width: 16, 20, 25, 30 mm

... Rail clamp mountings KGR are made of drawn aluminum profiles and have slitted clamping points machined by cutting methods. The holes in the clamping points are arranged at an angle of 90 degrees or parallel to each other. They are used for applications ...

Hose diameter: 8 mm - 20 mm
Width: 16 mm - 30 mm

... Rail T-clamp mountings TGR are made of drawn aluminum profiles and have a slitted clamping point machined by cutting methods. The clamping point bore is T-shaped relative to the bolt and to the bore on the opposite side. They are used for applications ...

Diameter: 30 mm

... Swivel clamps LSQ.P of glass fiber reinforced polyamide have a slitted clamping point. The fastening lug is smooth or has a crown serration that may be countersunk or raised. The fastening lug is centered and perpendicular to the axis of the bore, ...

... The safe connection of your stations DILO carries out the complete production area piping according to the customer's specification – from the first layout, material procurement, assembly up to the final approval. A temperature compensated pressure control ...

... Integrated pressure monitoring for leak control Special features ■ Complete realisation, ranging from the design to the commissioning ■ Piping systems can be realized in various materials, e.g. in copper or stainless steel ■ Integration into ...

... For isolating pipes ■ For assembly between tongue and groove part ■ For all types and pressure ranges ■ Available bored out for flow restriction ■ Range of application from -270 °C up to +650 °C dependent on the material used ...

Hose diameter: 1, 0.75, 0.5, 1.25 in
Width: 51.5, 62, 85, 44.5 mm

ZPB plastic pipe clamps allow for the quick, professional, and convenient installation of GX, BX, or KX flanged nozzles onto manifolds. Using these clamps, it’s not necessary to weld nipples or use thick pipes; all you need is one hole in the pipe. ZPB ...

Hose diameter: 0.75, 0.5 in
Width: 44 mm

ZPC plastic bayonet pipe clamps serve for a quick and easy installation of GX-type flat fan flanged nozzles. No need to weld nozzles or use thick pipes to thread. It’s sufficient to make a hole in the pipe and fix the clamp. The clamp body is in PVDF, ...

Hose diameter: 0.5 in - 2.5 in

ZPM metal pipe clamps are suitable for a quick, easy and safe instalment of various types of nozzles on pipes. They can be fit into a pipe simply by making a hole on it. As it’s not necessary to thread thick pipes or weld the nozzles, these clamps assure ...

Diameter: 3 mm - 16 mm
Length: 5 mm - 75 mm

... Materials : stainless steel Surfacing material : wide range [Please contact us for details] ...

... Materials : stainless steel, SUS316 Surfacing material : wide range [Please contact us for details] Size : 6－100 [mm] ...

... The TFG – TFR 1000 series includes hydraulic flexible hoses 1/4 – internal Ø 6.3 mm, working pressure 1000 bar. • Also available in custom sizes and types. • Flexible hoses can be equipped with quick couplers. Series TFG – TFR 1800 – 2000 – 2500 ...

... Overview
Hose Grip Assembly BHG1304-4 designed for installation on Convair CV-580 aircraft to secure the pitot hose associated with pitot probe 831-02. Suitable for commercial aircraft maintenance and replacement operations.

Compatibility

• Part

... Product overview
Hose Grip Assembly BHG1304-4 for Boeing 737 MAX. Compatible with pitot probes 851HT1 and 856AE19. Intended for commercial aircraft applications.

Compatibility & application

• Aircraft: Boeing 737 Max
• Pitot

... Description

• Part Number: BHG1304-4
• Part Type: Hose grip for pitot tubing
• Customer Type: Commercial aircraft
• Compatible Aircraft: Airbus A318 / A319 / A320 / A321
• Pitot probe model: 0851HL

Diameter: 12 mm - 100 mm
Temperature: 1,200 °C - 1,500 °C
Length: 25 m - 50 m

The Texil® sleeve is made of Texil® yarn, an excellent insulator; it does not irritate and withstands a continuous temperature of 1000°C. The sleeve is suitable for insulating pipes, protecting them against slag. It is an excellent ecological substitute ...

Diameter: 12 mm - 60 mm
Temperature: 550 °C
Length: 25 m - 100 m

... Texpack® sleeves are made entirely of 6-9 μ Texpack glass fibres. These only melt at very high temperatures. On request, rubber pipes can be sleeved. Applications Lagging for pipes, lagging for hoses and electric cables. ...

Diameter: 12 mm - 60 mm
Temperature: 550 °C
Length: 25 m - 100 m

Tricosleeve glass sleeve is produced by knit braiding. Although the thickness of the wall is thinner than that of the classic glass sleeve, due to the different type of braiding, it is a soft and flexible product. The maximum operating temperature recommended ...

Diameter: 21.2 mm - 42.5 mm

... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with velcro fastening, rotatable velcro strap holder incl. 50 cm velcro strap / maximum mobility with red MOVE insert, specially designed ...

Diameter: 21.2 mm - 42.5 mm

... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with screw-on plate / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and medium speeds ...

Diameter: 21.2 mm - 42.5 mm

... Product Overview
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder for mounting on profile rails / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and ...

Length: 56 mm - 80 mm

... Drinking water steel pipe adapter with external thread Material - Brass blank Material thrust ring - Brass blank Material moulded seal - EPDM Material retaining claw - Stainless steel Max. operating pressure - 10 bar Max. operating temperature ...

Length: 36 mm

... Steel pipe adapter with Eurocone internal thread Material - Nickel-plated brass Material thrust ring - Brass blank Material moulded seal - EPDM Material retaining claw - Stainless steel Max. operating pressure - 10 bar Max. operating temperature ...

... Steel pipe adapter with Eurocone external thread Material - Nickel-plated brass Material thrust ring - Brass blank Material moulded seal - EPDM Material retaining claw - Stainless steel Max. operating pressure - 10 bar Max. operating temperature ...

... Technical Data Material: SS316, SS304 available Pipe Rating: SCh40S, SCh80S available ...

... The CAMSTOPPER® "CAM" stopper is a very clever device! Equipped with a patented, innovative cam handle system, which locks the stopper into position with one motion, CAMSTOPPER® is undoubtedly the easiest and quickest stopper to fit and remove. It ...

The PRO Campstopper plug is a bigger model than the CAM model. It uses the same patented, innovative system for plugging pipes featuring a locking handle, but is more suitable for bigger pipes with nominal bores ranging from 175-mm to 500-mm. The PRO ...

... The Pro SPC is integrated with a handle actuated camlocking system. The unit provides a smooth installation, and removal. Also, it is withdrawn using a cord, which is fixed to the handle. The device is designed from HDPE, WC, and EPDM materials. It ...

... Meter-Bus (M-BUS) is the main bus used for energy metering and intelligent meter management, i.e. separate recording of heat, water, electricity and gas consumption. The Z-MBUS adapter allows us to interface M-BUS networks via RS232 serial port directly ...

The wide DCS - Drop Column System range includes both standard and customised drop solutions, all designed, configured, and supplied by TESEO — from the upper connection point to the terminal end of the drop column. The terminal section can be equipped ...

... Air & Electric Track Supply system, designed by TESEO, is the first solution of its kind ever intro­duced on the global market. It allows fluid and electrical power to be easily accessed along the entire travel length of the trolley. This system consists ...

... The trolley on hollow bar is equipped with 6 ball bearing wheels running on HBS 50 profile. The hollow bar has a double function: track for the trolley and conduit for compressed air. This trolley is recommended for high flow and heavy loads (max 40 ...

The new in house parts production enables the manufacturing of superior quality special work pieces and parts, in particular, turned groves, cross holes, millings multiple-edge turning and complicated geometries. The new mechanical design is characterized ...

Hose diameter: 18 mm - 304 mm
Width: 4.6, 7.9 mm

... INOX-BALL-QUICK metallic ties are recommended for clamping flexible cables or tubes only. They are available in two grades of material: > 304 stainless steel: for extreme temperature or flammability applications such as the food, chemical and medical ...

Width: 0.062 in - 0.22 in

The single wire concentrates the clamping force in one specific area around the hose to give the most effective holding force and clamping strength.

Width: 0.082 in - 0.142 in

A slimmer version of the single wire hose clamp. The single wire concentrates the clamping force in one specific area around the hose.

Width: 0.039 mm - 0.137 mm

A cost-effective choice for applications where a lower clamping force than offered by single wire clamps is sufficient and aesthetics are important.

Pressure: 0 bar - 700 bar

... Introducing the MPA Series, the Air-Oil Pressure Multiplier Increase your efficiency with a practical and economical solution for generating high hydraulic pressure! Product description: - Air Pressure: up to 8 bar - Oil Pressure: up to 700 ...

... 360° Orientable female thread plug for hose adaptor Female Thread (Th): 3/8 Temperature Range: -20°C +100°C ( -4°F +212°F ) ...

... Oriented flow meter (m/f) Material: Brass Nickel Plated Temperature Range: -20°C +100°C ( -4°F +212°F ) ...

... . Bore Ø: 6, 10, 20, 30, 40 mm . Flow rate: between 200 et 5000 Nl/min . Material: Aluminium By virtue of the COANDA effect, the motor flux draws in air at room temperature. This physical phenomenon greatly amplifies the flow which results in very ...

... Air Amplifiers, with the COANDA effect, MD series Presentation . 2 models . Bore Ø : 25, 38 mm . Flow rate : between 2015 and 4370 Nl/min / between 82.95 and 152.95 SCFM . Material : Aluminium By virtue of the COANDA effect, the motor flux draws ...

Orifice Restrictors are the simplest method of flow control and are one of Air Logic's best-selling product lines. Also called Precision Orifices or Flow Restrictors, they work on the principle of flow restriction by orifice diameter. The size is identified ...

Filtered orifices build on Air Logic's orifice product line with additional protection of an integrated filter. Orifices work on the principal of Flow Restriction with the orifice diameter being identified in the part number and by color codes assigned ...

Diameter: 1 mm - 30 mm
Temperature: -20 °C - 105 °C

... Standards • Compliant with directive RoHS 2011/65/EU • NFEN 60684-1 (10-2003) • Compliant with SHVC (list published by the ECHA) • CEIEN 60684-3 sheets 100 to 105 (12/2003) • Option: UL 224 - Oil Resistant - VW-1 (PVC105°) File E345725 • On request ...

Diameter: 1 mm - 10 mm
Temperature: -30 °C - 155 °C

... Thermoplastic polyurethane extruded sleeving Characteristics • Temperature class: F • Continuous working temperature: from -30°C to +155°C. Peaksat +185°C (few hours) • Dielectric strength: 8 to 15kV (depends on the thickness) • Halogen free • ...

Diameter: 8 mm - 100 mm
Length: 25 mm - 87 mm

... MALE / MALE REDUCER - STAINLESS STEEL 316L Inox 316L usiné EXAMPLE OF ORDER : 652413-86 ...

Diameter: 8 mm - 50 mm
Length: 26 mm - 57 mm

... FEMALE / MALE ADAPTER - STAINLESS STEEL 316L (Model : 5243) ...

Diameter: 6 mm - 80 mm
Length: 25 mm - 65 mm

... FEMALE / MALE REDUCER - STAINLESS STEEL 316L (Model : 5238) ...

... Product overview
High-pressure adapter connecting LOK (female) to female ports, rated to a maximum working pressure of 20,000 psi. Designed to provide pressure and size compatibility between differing port types without additional coupling.

Specifications
Maximum ...

... Product overview
High-pressure adapter for converting male to female connections (PT), rated for pressures up to 60,000 psi. Designed to allow direct connection between differing thread genders and sizes without additional couplings.

Specifications

• Pressure

... Product

• Male-to-male adapter

• Hiflux

• Union & Adapters

• Reference: adp-mm-60k

... Low density bare type foam pig, diameter from 2" to 60", complete with polyurethane base. Suitable for drying and/or light cleaning of every type of pipeline. General function and application: For liquid removal, swabbing, drying, product separation ...

The magnetic Non-Intrusive pig signaler, is very easy to operate. The display is very easy to read for the detecting of every type of pig equipped with magents. Very easy to be installed. The remote system permit to read on a LED the passage of a pig ...

The Bare Foam pig are available in the medium and high density version. Are commonly used for pigging of pipeline with short lenghts. For the debris removal. For the separation and batching of products. Suitable for pipelines with 1.5 bends. And also ...

... SOFTWALL HOSE PROTECTING SLEEVE. TEMP. -15°C + 80°C ...

Diameter: 12 mm - 125 mm
Length: 100, 50 m

Hose Guard Nylon Protective Sleeve is woven from thousands of high tenacity multi-filament nylon yarn which has excellent abrasion resistance, UV resistance, chemical resistance, and dustproof. This smooth-bore sleeve is easily installed over hose, chains, ...

The sleeve of the Firesleeve with Velcro Hook Loop Closure is made from knitted high bulk fiberglass and coated with high quality silicone rubber, allowing it to provide maximum protection for hoses, cables and wires against heat and flames. The Velcro ...

Diameter: 19 mm - 305 mm
Temperature: 260, 1,205 °C

... Fire Résistant Firesleeve With Velcro Hook And Loop Fire Résistant Firesleeve With Velcro Hook and Loop fastener is made by silicone fiberglass fire sleeve and adding a hook & loop closure. The hook & loop and thread can be standard polyester and nylon. ...

... Product overview
Tube-to-pipe male adapter 739 High Purity LMR designed to connect metric and inch tubes to BSP-T (pipe) threads for high-purity fluid and gas systems.

Applications

• High-purity process lines in chemical

... Product name
767LP Port Connector — Ultra high purity VCJ metal gasket face-seal tube fitting

Key features

• Ultra-high-purity VCJ metal-gasket face-seal tube fitting for critical fluid and gas systems.
• Designed

... Valve Manifold Box and Panel Gas Cabinet (VMB/VMP)

Overview
VMBs (Valve Manifold Boxes) and VMPs (Valve Manifold Panels) are modular components for controlled distribution of high‑purity and specialty gases in industrial environments. ...

... PROTECTIVE COLLAR FOR MARKING AND COVERING PIPE JOINS Material: LDPE Colour : Red, Black, White, Blue according to reference Dimensions : mm Standard : Gas/BSP (DIN259) ...

Diameter: 20 mm - 200 mm
Operating pressure: 0 bar - 200 bar

...

• Stainless steel material

• Hardened inner sealing surface

• Special design sealing components

• Easy changable repair parts

• All flage types are aviable DIN, ANSI

Diameter: 20 mm - 200 mm
Operating pressure: 0 bar - 20 bar

... Swivel Joint for water, hydraulic oil and chemical fluids, with carbon steel material, flanged. Media Type Water General Purpuse, Hydraulic Oil Max.




Speed 20 RPM Max.
Pressure 250 Bar Max.
Temperature 120 C
Rotor Size 1/2 ...

... Product Overview
These QCSPL-S shaft locking clamps provide rapid, positive locking of a shaft without tools. Push-handle actuation clamps the shaft in position; releasing the handle allows a spring to return the clamp to free movement. ...

Width: 35 mm - 45 mm

... Product overview
Pneumatic shaft-locking clamps PSLC-L are designed for quick-change applications to secure sliding shafts and spindles after positional adjustments. The unit uses spring clamping when air is removed and pneumatic unclamping ...

Width: 35 mm - 40 mm

... Product description
Pneumatic QSCA-N shaft-locking clamps are automated quick locks designed for machine changeover and positional locking of sliding shafts and spindles. The mechanism uses spring clamping when air is removed and pneumatic ...

... With the MCS® Series 621 test point, Oleotec has designed an innovative and reliable product. Compared to the conventional ball valves with a metal/metal sealing, the poppet valve version with its O-ring sealing represents a leakage free solution. The ...