Other electric power supplies and equipment

* Protect 12v battery from being over-charged and over-discharged * Handles up to 7 Amps(100W Solar panel) of solar charging * LED indicators for easy monitoring * Quick and easy connection to solar panel and battery

The SUPER-LITE 6V & 12V Battery Tester is highly designed to provide a good quality performance and functionality for very specific purposes. It is specifically constructed for a quick and precise monitoring of the battery condition. ...

Pioneer’s introduces a new breed of High Efficiency Mid Voltage PFC power supplies providing full output power with Single or Three Phase AC Input. Designed to support both standalone and parallel configurations, these models are configured ...

Output voltage: 230 V
Power: 250 W - 1,000 W

Output voltage: 24, 48 V
Power: 400, 650 W

Clean and reliable DC power supply for critical loads available in two options: 24V/400W or 48V/650W Internet ready and remotely accessible for complete and cost effective system and site monitoring Advanced battery charging, monitoring ...

Features： • Optional module • Max. input/output current is 25 A • External button to switch a system from on-grid to off-grid

Input voltage: 85 V - 370 V
Output voltage: 12, 24 V
Current: 0.16, 0.23, 0.5 A

UCS-CHR Series Combined Charger and Power Supply UCS-CHR series is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range 85~264VAC/ 120~370 VDC the series suits most applications ...

With the ROGER™ GPS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2 and GLONASS frequency bands. It has one chaining output and two repeater outputs. ...

LGP 3001N2 A new generation. The LGP 3001N2 has a continuous output power of 3000 W and an input voltage of 230 V.

Input voltage: 115, 230 V
Output voltage: 7 kV - 8 kV

The Multistat power pack in combination with HAUG ionizing units is intended for the removal of electrostatic charges. The mains voltage is transformed by the Multistat to an output voltage of 7 – 8 kVAC for the operation of HAUG ionizing ...

POWER FACTOR CORRECTION. The PFC2 range of Capacitor switches provide optimised switching and control of three phase capacitive loads for Power Factor Correction, suitable for a three phase supply using the two-leg control technique. ...

The Power Supply and Safety Barrier Unit GSV 14X Series features a main transformer with a large input voltage range. It has also a certified use with measuring chains in potentially explosive. The GSV 14x series of power supply units ...

Input voltage: 230 V

Power supply for reduced voltage circuits. • Modular box (3 módules) for application in DIN rail. • Indication of Power Supply with output tension (17-18), through green LED. • Frontal indication of nominal tension of power supply. • ...

HF GENERATOR High frequency generators are a source of high-frequency energy indispensable in industrial processes of dielectric and induction heating. For many years high-frequency generators have been an attractive alternative to ...

Output voltage: 0 V - 120 V
Current: 0.01 A - 10 A

The Adjustable Digital Constant Current and Constant Voltage DC Power Supply is with high stability and high accuracy. The voltage and current can be adjustable and can output costant current or constant voltage. They are suitable to ...

Input voltage: 100 V - 277 V
Output voltage: 25 V - 42 V
Current: 1,100 A - 1,500 A

0-10V Dimmable 120-347VAC Input Class P ▪ Input Voltage: Universal AC input 100-277VAC ▪ High efficiency: 88% / typical ▪ Active PFC: 0.99 Max ▪ Low THD ▪ Protections: OVP / SCP ▪ Constant Current ▪ Compliance to worldwide ...

The PFR 06/PFR 12 is the latest coverage of energy factor operators by intensive system. It is designed for easy and effective regulation. The regulator monitors the power system conditions that precisely and immediately take decisions ...

8878 multi-purpose switch mode power supply ac or dc inputOverload and short circuit protection12Vdc output (adjusted using on-board components)Power ON and output supply LEDHigh efficiency design

The HydroACT Analyzer with DuraTrac 4 Streaming Current Sensor is Chemtrac’s most reliable and accurate Streaming Current Monitor, providing unique and versatile capabilities for optimizing coagulant or polymer dosing. With improved Streaming ...

Power supply for the spectro::lyser V3. Connect to the spectro::lyser via Bluetooth or WLAN and use the user-friendly webinterface Io::Tool for probe configuration and data visualization. s::can connection device for one spectrometer ...

The Capacitive Coupling Clamp, EFTC 2012, provides the ability to couple Burst / EFT pulses to data lines. It can also be used for coupling to main lines where no CDN is available, for example high current lines >200 A.

SPATZ+ High Precision Weld Timer Our compact SPATZ+ high precision weld timers are universally applicable and inexpensive alternatives to conventional power sources for micro and small parts connections. Here are some facts about out ...

1. High effectiveness of stabilize the instable voltage 2. Low ripple wave and interference3. Output ammeter4. Output voltmeter5. Overload protective function6. Constant voltage setting function7. The most stable IC component was be used8. ...

Input voltage: 90 V - 275 V
Output voltage: 48 V - 61 V
Power: 900 W - 1,900 W

Description 48V/39.6A Switching Mode Rectifier Features ‧Innovative single phase input stage with wide input range ‧Power factor > 0.99. Sinusoidal input current. Meet EN61000-3-2 ‧High efficiency ‧Microprocessor based ‧Active ...

Miniature lightweight insulation tester. It weighs only 340g(battery included), but carries full measurement functions. Automatic discharge of circuit capacitance. Test leads with remote control switch. New robust housing case. ...