M12 distributors are available in various versions. The 4, 6 or 8 M12 slots are in 4 or 5 pole design. The group outlet is designed as a fixed cable version, hood version for connection by the user, or with M23. Special versions are also available. For ...
Weidmüller
Input voltage: 110 V - 240 V
Output voltage: 0 V - 0 V
Power: 0 W - 150 W
... Product overview
This modular 150W power supply (APS150W) is designed for NETGEAR M4300 series 1G non‑PoE switches. It provides additional or replacement power capability and supports 110–240V AC global input voltages.
Key features
- Compatible
Voltage: 16, 32 V
Combines battery banks when one is being actively charged, and disconnects them when charge voltage is removed. Supports high-amp intermittent or continuous current loads. Very low quiescent current draw (in On or Off states) due to bi-stable mechanism. ...
Input voltage: 400 V
Output voltage: 48, 24 V
Current: 30, 60 A
Maximize efficiency and reliability with our robust switching-mode power units, featuring an IP54 protection rating. Installed exactly where protective low voltage is needed, our units minimize cable lengths. Choose from 24-volt or 48-volt models, both ...
Input voltage: 120, 240 V
Current: 15 A
UF-4000A provides targeted heating and precision temperature control for reflow soldering applications such as the connection of flexible circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding ...
Input voltage: 90 V
Output voltage: 24 V
Power: 30 W - 120 W
... Slim Design and Long Service Life Many basic applications only require 24 VDC. This is where WAGO’s Eco Power Supplies excel as an economical solution. At 25 mm and 38 mm wide, the new power supplies (2687-2142 and 2687-2144) are slim and compact. ...
WAGO
Input voltage: 100 V - 240 V
Output voltage: 24 V - 48 V
Current: 5 A
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
... Product overview
- Aspirating smoke detection accessory designed for integration with VESDA® VPS100 and VPS300 systems, providing required power and connection support for sensor operation.
Key features
- Compatibility
Gamewell-FCI
Input voltage: 8 V - 16 V
Output voltage: 12 V
Current: 65 mA
... Overview
12V PSU for NVR is a low-voltage power supply board designed to replace the standard 110/230 V~ power supply inside a network video recorder (NVR) enclosure. It enables an Ajax NVR to operate from a 12 V source, providing an alternative ...
... Economy condensate distributor The PURO-CT-DISTRIBUTOR is designed to distribute condensate into two or three oil/water separators. This way you can combine more PURO-CT units to match up against larger compressor systems. As condensate flows into ...
Input voltage: 600 V
Output voltage: 9, 13 V
Current: 200 A
The IPB-5000A - Inverter Power supply delivers superior welding control for a wide range of micro-joining applications. When paired with the ITB-780A6 transformer this unit is capable of a maximum output of 6000 Amps, making it ideal for most resistive ...
AMADA WELD TECH
Power: 22, 30, 60 kW
Output voltage: 800 V
... Overview
E-DIAG CHARGER is a mobile charger and diagnostic station for workshops, designed to perform traction battery charging and in-operation diagnostics on electric (BEV) and plug-in hybrid (PHEV) vehicles. The unit combines AC/DC charging, ...
Input voltage: 100 V - 240 V
Output voltage: 24 V - 28 V
Current: 2.5 A
The PS-60 is a perfect companion to most devices in the Westermo portfolio, designed to match the robust and reliable products that Westermo is known for. With superior buffering capacity and EMC immunity, the PS-60 can power network communication equipment ...
Input voltage: 90 V
Output voltage: 264 V
Current: 2 A
... Stay protected against power failures. The DPS-520 offers uninterrupted operation for up to x4 D-Link switches and in the event of a power failure, it will be immediately activated, allowing your business to stay operational. High Flexibility and ...
D-Link®
Output voltage: 0 V - 800 V
Current: 0 A - 200 A
Power: 0 W - 50,000 W
The Teledyne Test Tools range of DC Power Supplies comes in non-programmable and programmable versions with one, two, three and four output configurations. Key features within the Teledyne Test Tool Power Supply range include programmability via USB or ...
Input voltage: 90 V - 370 V
Output voltage: 30, 48, 96 V
Current: 15.7 A - 250 A
All CO2 lasers require a well-regulated DC power supply for operation. Novanta recommends a corresponding DC supply for each CO2 laser model, typically a switching supply manufactured by Power One, Emerson, or XP Power.
... Better video, compatibility, and control while extending HDMI video signals over a Gigabit Ethernet network. Supports up to 1080p HD Setup units using only the front panel interface, no additional configuration required Intercompatible ...
... Low-Voltage DC Power Supply Use the SEL-9321 Low-Voltage DC power supply as an inexpensive, robust means to convert high-voltage dc battery sources for use with communications or instrumentation devices. ...
Schweitzer Engineering Laboratories
Input voltage: 24 V - 30 V
Output voltage: 24 V - 30 V
Current: 4, 2, 0.4 A
... The reference in current regulated power supply Clutch and brake control power supply Power Supply for Electric Clutches and Brakes POWERBLOCK is the most comprehensive range of CURRENT REGULATED Power Supply units on the market. Based on microcontroller ...
... Discover our new accessory T-SPLITER M12.8 For automatic series connection of safety switch Getting Auto series safety switch Easy installation / wiring / installation speed 1. Easy installation 2. Simplified wiring 3. Quick installation ...
Input voltage: 24 V
Output voltage: 4 V - 8 V
Current: 4 mA
... CRY575 MIC power is a three-channel microphone power module that provides a constant current source for the IEPE preamplifier, as well as the positive/negative power for the dual-power supply preamplifier. It is featured by high input impedance, low ...
... Product family
- Analogue power-factor meters for panel mounting with 90° scale, intended for measurement of power factor (cos φ) in electrical installations.
Available models
- F72PS — Analogue power-factor
... Category
- Analogue power-factor meters (240° scale), panel-mount indicators for monitoring power factor in electrical installations.
Available models (listed on page)
- A72PS — Analogue Power-Factor meter,
Input voltage: 220 V
Output voltage: 12 V
Current: 5 A
... Product overview
Power supply kit designed to deliver 60 W output (12 V, 5 A). The kit includes a power brick, an adapter cable for QA42 and SA44 devices, and a power cord supplied with regional plug adapters (EU, US, JPN, etc.). Ideal for industrial ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 5 A
... Overview
Power supply kit for SBC-A44-pITX: power brick 60W (12V, 5A), adapter cable for SA44 and mains lead with regional plugs (EU, US, JPN, etc.).
Included
- Power brick 60W (12V, 5A)
- Adapter cable for SA44
- Power
Input voltage: 100 V - 240 V
Output voltage: 24 V
Output frequency: 60, 50 Hz
... Power supply: – 100… 240 Vac (50/60 Hz) Connectable to: – Deltadue Series – Sigmadue Series – OPMT operator panels – 24 Vdc controllers and thermostats ...
... Battery holder for CR2 and CR123A lithium batteries.
Through-hole pin and lead wire types are available.
Specifications
- Material : ABS (UL94V-0)
- Operating temperature : -10°C ~ +60°C
- 4 models available
- Available
TAKACHI Electronics Enclosure Co., Ltd.
... Coin cell holder for 9 different coin cell types.
Surface mount type with compact body.
Heat resistant glass fiber filled LCP for lead free reflow soldering.
Tape reel packages (-TR models) are available for bulk purchase.
SMTU1220-G, SMTU1632-G ...
TAKACHI Electronics Enclosure Co., Ltd.
... Coin cell holder with through-hole pins.
Heat resistant glass fiber filled LCP for lead-free reflow soldering.
8 different coin cell types are available - Compatible batteries
LR44/SR44, CR1220, CR1632, CR2016×2pcs, CR2032, CR2430, CR2450, ...
TAKACHI Electronics Enclosure Co., Ltd.
Input voltage: 100 V - 240 V
Output voltage: 24 V
Power: 3 W
... The FTR power supply is a switching mode power supply to be connected directly to the line proviiding na isolated output. It is suitable for powering instruments such as 4-20 mA field transmitters. The FTR power supply is designed for DIN rail mounting, ...
Input voltage: 90 V - 370 V
Output voltage: 24 V
Current: 3, 13, 5, 10 A
... The NOVUS NDR Power Supplies have full range voltage input, high efficiency, DIN rail support and operation temperature up to 50 ºC. Attending international standards and certifications they are a robust solution to provide 24 Vdc for any industrial application. - ...
Input voltage: 100 V - 370 V
Output voltage: 24 V
Current: 2, 3.13, 5, 10, 20 A
... The NOVUS EDA Power Supplies have full range voltage input, high efficiency, DIN rail support and operation temperature up to 70 ºC. Attending international standards and certifications they are a robust solution to provide 24 Vdc for any industrial application. - ...
Input voltage: 230 V - 480 V
Output voltage: 325 V - 679 V
Current: 16.5 A - 1,450 A
... Overview
The COMBIVERT R6 is a mains-driven power supply and regeneration unit designed for industrial applications. It provides an unregulated, mains-dependent DC voltage for centralized DC supply and enables energy-optimised compensation within ...
The PASF-60.24 is a two phase power supply unit with an integrated output-relay fit for the demanding solutions. It offers maximum functionality for applications in complex systems and machines. The power supply steps down the voltage from 230V AC to ...
Input voltage: 100 V - 370 V
Output voltage: 24 V
... akYtec PASB-15/30/60.24 industrial power supplies are designed to provide stable DC voltage to a wide range of radio-electronic devices, such as relay-automation systems, controllers, etc. Maximum output power: 15 W, 30 W, and 60 W. Each power-supply ...
AC/DC current analyzer with universal current input
... Switched-mode power supplies for top-hat rail mounting Version: Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto ...
... The SV210 can be used as a signal distributor, as well as a signal converter. It can be used to split or convert SinCos input signals to two SinCos outputs and two HTL / TTL outputs. • Input in the format SIN +, SIN-, COS +, COS-, REF +, REF- • 2 ...
motrona
... The SV211 serves as signal distributor for SinCos signals. With the help of the SV211, a SinCos input can be split up to four SinCos outputs. • Input in the format SIN +, SIN-, COS +, COS-, REF +, REF- • 4 outputs in the format SIN +, SIN-, COS +, ...
motrona
The encoder distributor GV204 is used to divide one input signal (HTL or RS422) into two output signals (HTL or RS422). If more than two terminal devices are connected, the devices can be cascaded. It is also possible to use a larger splitter like the ...
motrona
... ELECTRONIC POLARITY TESTER TYPE TPE Innovative Effective . Dimensions: 143x22x19 mm . Weight 31 gr . 2 LED's : Green=South and Red = North . Sensitivity: +/- 15 mT included with purchase - Battery: 4x1,5 V Use : ...
... Medium voltage power factor correction and filter equipment • Economic advantages of generators, transformers, linesschal and switching equipment • Lower loss and establishment of additional reserves, to transmit more active power • Lower voltage drop • ...
Input voltage: 230, 110 V
Output voltage: 5 V - 300 V
Current: 40 A
... EPOS MC4 is a compact, portable motor and coil test system with a particularly powerful AC/DC source. EPOS MC4 is used to supply power to motors and trip coils and can be used as a battery substitute in switchgear and as a power supply during tests ...
Input voltage: 230, 400 V
Output voltage: 300 V
Current: 40, 32, 30, 25, 20 A
... Single and three-phase voltage sources Automatically regulated AC/DC voltage sources for single or three-phase voltages, with high power and fast settling time. •For powering resistive, inductive or capacitive loads •For testing components, motors ...
Input voltage: 100 V - 240 V
Output voltage: 24 V
Power supply in card format (1 slot) for the audio matrix of the COMPACT and OPTIMAX2 systems. 100-240V AC input, 24V DC output.
Input voltage: 230 V
Output voltage: 24 V
Current: 0 A - 30 A
Manager for permanent emergency power supply according to EN 54-4 in case of power failure. The 19” unit (2u) is equipped with 6 fused outputs that can be used with up to 30 A load. The smart battery condition monitoring ensures an uninterrupted 24 V ...
Input voltage: 12 V
Output voltage: 24 V
... Power supply with two 12 V DC & 5 Ah batteries for the uninterrupted supply of 24 V DC to the sets of mechanisms that are installed in accessible bathrooms and changing rooms (KB-10F), as specified in the Spanisch Technical Building Code (CTE- DB SUA ...
... DESCRIPTION The power hub combines reliable power supply, seamless fieldbus communication and wireless remote control in one powerful package. The power hub is a central component of the EFCm and EFC system, responsible for both power supply and communication. ...
Input voltage: 0 V - 50 V
Output voltage: 15, 24 V
... HAMPTON, VA. March 1, 2020 - Teledyne Hastings Instruments, a worldwide leader of vacuum instrumentation and thermal mass flow meters and mass flow controllers, announces the release of the THCD-401 four channel power supply, controller, and display ...
... ・Compact distributor housing for TH35 top hat rail systems ・suitable for splicing installation cables ・faster installation through splicing preprepared pigtails ・equipped with LC-D adapter and LD pigtails ・pigtails with semi-tight buffered fiber dia ...
METZ CONNECT
... ・distribution housings for copper and fibre optic applications ・2 separately lockable areas to separate the installer and user sides ・protection class: IP54 ・versatile due to modular design ・good access possibilities and simple installation ・the ...
METZ CONNECT
... ・surface-mounted housing for splicing fibre optic installation cables ・equipped with a patch panel with 12xLC-D OM4 (violet) couplings ・equipped with pigtails prepared for splicing ・pigtails with semi-tight buffered fiber ø 0.9 mm, secondary and primary ...
METZ CONNECT
Input voltage: 230 V
Output voltage: 48 V
... Low voltage uninterruptible power supply. Monitoring - 4 switched power lines - batteries - from the main power supply 4 configurable trigger inputs ...
... Product summary
Dual distributor with two M12x1 outlets, 5-pin A-coded connector, 1:1 wiring. Compatible with CAN bus protocols (CANopen, CAN SAE J1939).
Features
- Dual distributor (two M12x1 outlets)
- 5-pin, A-coded
- Wiring: