Input voltage: 120 V - 227 V
Output frequency: 50, 60 Hz
PS350XA5 power pack is the heart of the low voltage sensor system. It transforms 120, 240 or 277 volts to power the remote sensors.
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 1 A
DES Series Power Supplies are specially designed for the full range of Magtrol’s Eddy-current and Powder brake dynamometers with the design goal providing the best response time. The DES Series supplies are packaged in an industrial housing made of cast ...
Input voltage: 240, 120 V
Output voltage: 24 V
Current: 0 mA - 1,000 mA
The 5212 is a 0-1A current-regulated 24 VDC power supply and display that is designed for use with Magtrol’s hysteresis brakes and clutches. It features a 10-turn current adjustment potentiometer and 3 selectable current ranges: 200 mA, 500 mA, and 1000 ...
Input voltage: 120, 240 V
Output voltage: 0 V - 90 V
Current: 0 mA - 1,500 mA
The Model 5200 is a basic unregulated power supply that is designed for use with Magtrol’s Hysteresis Brakes and Clutches. The 5200 is available in either 12, 24 or 90 VDC voltages, corresponding to the available hysteresis brake/clutch coil voltage options. ...
Input voltage: 380 V - 480 V
Output voltage: 48 V
Power: 1,500 W - 3,200 W
... Description
Industrial power supply designed for use with SOMANET and ACTILINK equipment. Provides 48 V DC output with 1500 W continuous and 3200 W peak capacity. Integrated braking chopper handles regenerative energy. DIN-rail mounting for ...
Input voltage: 342 V - 528 V
Output voltage: 48 V
Power: 960 W - 2,000 W
... Short description
Industrial power supply for motion applications. 960 W continuous / 2000 W peak, input 3-phase AC 342–528 V, output 48 V DC. Integrated braking chopper, IP54, chassis-mount for cabinet-free installations.
Overview
The ...
The Cauliflower Segmenter 211F is designed for efficient fleuretting, processing cauliflower heads with diameters between 120 and 250 mm. It delivers the core in one piece, discharged separately, eliminating the need for manual presorting. The machine ...
The DTS 2340.IRIG Distributor is a signal distributor for modulated (AF) and unmodulated (digital) IRIG-B signals. The distributor consists of two identical lines which operate independently of each other.
The DTS 2345.Serial Distributor is a signal distributor for serial interfaces (RS 232 and RS 422). The distributor consists of two identical lines which operate independently of each other.
The DTS 2390.DCF Distributor is a distributor for DCF 77 signals (unmodulated). The current loop input is distributed to five current loop outputs. The device is a redundant system containing two identical systems.
Input voltage: 220 V
Output voltage: 24 V
Current: 5.2 A
... PSU-20 can reliably supply current in the area installed at plenty of flame detectors during rectification (at DC24V). • Reliably supply spare current • Supply current up to 20 flame detectors ...
Input voltage: 85 V - 370 V
Output voltage: 5 V
Current: 5 A
... Power supply, 5A, 5VDC, 85 to 264VAC Universal, DIN mount, Switching power supply FEATURES • Universal AC Input (85 to 264VAC) • DC Compatible Input (120 to 370VDC) • Protections: Short Circuit, Overload, Over Voltage, Over Temperature • Mounts ...
Dataforth Corporation
Input voltage: 105, 125 V
Output voltage: 5 V
Current: 1 A
The SCMXPRT-001/-001D and SCMXPRE-001/-001D encapsulated power supplies are available in 120VAC or 220VAC input voltage ranges and provide 5VDC outputs suitable for all SCM5B modules. They are designed to mount on the SCMXRK-002 metal rack or DIN-rail ...
Dataforth Corporation
Input voltage: 85 V - 264 V
Output voltage: 24 V
Current: 5 A
... Power Supply, DIN Rail Mount, 85-264 VAC 47-63 Hz In, 24 VDC 5.0 A Out Dataforth’s PWR-PS5RxW series sets new standards for switching power supply technology. Combining rugged, compact enclosures, incorporating all international standards and approvals, ...
Dataforth Corporation
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 40 mA
... Description: - Current loop power supply Power supply: - 115 / 230 Vac ± 10% 50 / 60 Hz Consumption: - 1,5 VA Stabilized output: - 24 Vdc 40 mA Operating temperature: - - 10 / + 60 °C Dimensions (w x h x d): - 35 x 95 x 72 mm Weight: - Approx ...
SENECA | AUTOMATION INTERFACES
Input voltage: 24 V - 230 V
Output voltage: 24 V
Current: 50 mA
... Description: - Current loop dual power supply Power supply: - 115 / 230 Vac (s100s-1-ST); 24 V (s100s-3-ST) Consumption: - 3,5 VA Output: - 2-CH stabilized output with galvanic isolation 24 Vdc, 50 mA Operating temperature: - - 10 / + 60 °C Dimensions ...
SENECA | AUTOMATION INTERFACES
Input voltage: 115 V - 230 V
Output voltage: -15 V - 15 V
Current: 350, 75 mA
... Description: - Dual stabilized power supply Power supply: - 115 / 230 Vac ± 10%, 50-60 Hz Consumption: - 7,5 VA Output: - + 15 Vdc 350 mA; - 15 Vdc 75 mA Operating temperature: - - 10 / + 60 °C Dimensions (w x h x d): - 70 x 95 x 105 mm Weight: ...
SENECA | AUTOMATION INTERFACES
Input voltage: 230, 115 V
Output voltage: 18 V - 23 V
Current: 4 mA - 20 mA
... • Multiple power supply electronically up to four two-wire transmitters • Isolation of each circuit with each other protected against short circuits • Plastic housing for mounting on a 35 mm DIN-rail according to EN 50022 Serves for feeding of two-wire ...
... The Wolf ATEX Splitter Box is compact, portable and CE marked to the ATEX Directive for safe use in Zones 1 and 2 potentially explosive gas and Zones 21 and 22 dust* atmospheres, making it ideal for power distribution within hazardous area confined spaces. The ...
Input voltage: 90 V - 264 V
Output voltage: 12 V
Several universal AC adapters / chargers for Mark-10 force gauge and torque gauges are available, each of which consists of a body and replaceable prong. Spare prongs are also available.
Input voltage: 90 V - 264 V
... PoE Single Port injector to supply Basler ace GigE cameras with power via a data cable. The PoE Single Port injector has two RJ-45 jacks and one C14 jack for power supply. An additional power cord with IEC Type C14 connector and two GigE cables (such ...
Input voltage: 12 V
Power: 18 W
... Power supply for Basler pilot, scout GigE and aviator GigE cameras. This camera power supply delivers 12V and is equipped with a Hirose 12-pin connector on the camera side. This Basler Original power supply is Energy Efficiency Class VI and EMI FCC Class ...
... The compact Q.PS-PEL-240x power units with 24 VDC output voltage can be installed in a very restricted space and therefore the installation in cost-effective electrical distributor boxes in accordance with DIN 43880 is possible. They are therefore ideally ...
Input voltage: 1,100 V
Output voltage: 0 V - 13 V
Current: 50 mA
... Continuously adjustable, accuracy up to 6½ digits Voltage output resolution 10μV The ATS-1100V is a reference voltage source with high precision and high stability voltage output. Maximum output voltage is 13V, rated output current is 50mA. Voltage ...
Input voltage: 1,200 V
Output voltage: 0 V - 13 V
Current: 50 mA
... Continuously adjustable, accuracy up to 6½ digits Voltage output resolution 10μV The ATS-1200V is a reference voltage source with high precision and high stability voltage output. . Maximum output voltage is 13V, rated output current is 50mA. Voltage ...
Input voltage: 2,000 V
Output voltage: 2, 200, 6, 200, 20 V
... Digits 4½位 Resolution 2μV The ATS-2000V series is a voltage source with high accuracy and high stability voltage output. Maximum output voltage 200V, minimum voltage resolution 2μV, high output accuracy and low noise. The operation panel is displayed ...
Input voltage: 190 V - 264 V
Output voltage: 12 V
Current: 1.25 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 2.5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 5 V - 30 V
Output voltage: 5 V - 30 V
... Product description
PPS is the preamplifier power supply and signal separator. When the chosen data acquisition board cannot supply power to the preamplifier and there is no power adapter available to connect to the preamplifier, connect the ...
Input voltage: 230 V
Output voltage: 24 V - 200 V
Power: 125 W - 1,500 W
... These equipment are DC power supply for electromagnetic chucks. They are used to magnetize an demagnetize the chucks. In addition, while demagnetizing the chuck, they carry out a process that removes the residual magnetism on the contact surface, and ...
Power: 21, 22 kW
Output voltage: 230, 400 V
Hidden electric vehicle chargers offer a discreet and space-saving solution for homes and public spaces. Options include specialized hidden wallboxes, units disguised behind landscaping, or innovative "invisible" chargers that mount inside meter boxes ...
Power: 3.5 kW - 21 kW
Output voltage: 230, 400 V
AEC-21Y-G1 is a single-phase and three-phase switchable AC EV charger with a maximum current of 32A and a maximum power of 21kw. It supports NFC, RS485, Bluetooth, 4G communication and has 14 safety protection functions. Multiple working modes can be ...
... Product Overview
BSTFLEX Lithium Battery Safety Bag is a fire-resistant battery containment solution for safer storage, charging, handling, and transport of lithium-ion batteries and battery packs. Built with high-temperature, flame-resistant, ...
... Product Overview
E-Bike Battery Safety Bag is designed for safer storage and charging of lithium-ion batteries used in electric bicycles. The bag provides an additional containment layer to help limit heat, sparks and small flame release in ...
Output voltage: 0 kV - 50 kV
Current: 0 mA - 1 mA
Power: 50, 40 W
... • Voltage : 0-40 kV ; 0-50 kV • Current : 0.0-1.0 mA • Power : 40 W ; 50 W • Control : 3 inches touch screen • Safety : Automatically shut down when spark occur • Dimensions (LxWxH) : 300x400x150 mm3 • Weight : 5 kg ; 6 kg ...
... EPMG® converts DC battery power into a separate excitation source to provide “boost” for self-excited (shunt) generators during heavy transient loads – providing PMG performance for much less cost. Available in 12V (EPMG-1270) and 24V (EPMG-2470). Features ● ...
EB-9V automatic flashing module is installed with a built in 9V lithium battery which helps the generator to establish voltage build up at initial stage; No external battery and DC power supply are required. the excitation power is supplied by the internal ...
Input voltage: 90 V - 305 V
Output voltage: 14.36 V - 14.64 V
Current: 0 A - 0.6 A
... Overview
The PTM-16 converts two AC power inputs from an automatic transfer switch (ATS) into a stable DC power output, enabling ATS installation sites to supply DC-powered control units. It is designed to provide operating power to Kutai ATS-245-DC ...
Input voltage: 12 V
Output voltage: 12 V
... Product overview
Pulse control power supply by SEIWA, intended for machine vision applications. Provides controlled pulsed power output suitable for powering illumination devices, cameras and sensors in industrial inspection systems.
Applications
- Machine
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
... Product overview
Digital PWM power supply designed to deliver pulse-width modulated power for machine vision systems. The unit provides regulated PWM output suitable for driving lighting and illumination modules used in industrial inspection ...
Input voltage: 230 V
Output voltage: 6 V - 24 V
... Product features
- Any output voltages between 6-24 VDC range
- 6 / 8 / 10 / 12 / 15 / 18 / 24 VDC nominal output
- Overcurrent-protection
- Overvoltage-protection
- 230 VAC power supply
- TS-35
... Overview
The screw buffer module stores and delivers screws within automatic screw feeding lines to reduce feeding interruptions and support high cycle-rate assembly processes.
Key selling points
- Screw buffering to decouple
Input voltage: 220, 110 V
Output voltage: 180 V - 286 V
Current: 5 A - 200 A
... • IEC 61204, ANSI/IEEE Std C37, NEMA
• ISO 9001, KEMA, CESI, CE, TUV, UL, ASTA
• Seismic design, ETGI-1.020, IEEE Std 693, NCh2369
• Structural design, ASTM A325, ANSI/AISC 360, AWS D1.1
• High altitude correction per IEC 61204 & IEEE C37, ...
Voltage: 960 V - 1,401 V
Energy capacity: 1,000 kWh - 4,000 kWh
... • IEC62619/UL1973/UL9540A/UN3536, NEMA
• ISO 9001, KEMA, CESI, CE, TUV, UL, ASTA
• Seismic design, ETGI-1.020, IEEE Std 693, NCh2369
• Structural design, ASTM A325, ANSI/AISC 360, AWS D1.1
• High altitude correction per IEC & IEEE, 1000 ~ ...
DIGITAL ELECTRIC
DIGITAL ELECTRIC
Input voltage: 198 V - 242 V
Output voltage: -5 V - 8 V
Current: 120 A
... Overview
The DXNT series Superconducting Magnet Power Supply by Dexinmag is an all-digital, high-stability bipolar current source engineered for superconducting magnets. It combines a switching pre-regulation stage with a linear regulation ...
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
This power supply is a highly stable bipolar constant current power supply, which is widely used in the excitation of inductive loads such as electromagnets and Helmholtz coils. The power supply adopts a linear power supply structure, with high output ...
Input voltage: 200 V - 240 V
Output voltage: 32 V
Current: 10 A
DX-3500D three-channel precision DC power supply is a three-channel high-precision bipolar DC power supply. It is mainly used to provide high-precision bidirectional current excitation for geomagnetic compensation coils, coil magnetic field generators ...
... Built-in LCD display shows recharging status. If the temperature is over the limit when recharging, the charge station will activate the protection function to stop recharging. Charge station can identify whether battery is supplied by KILEWS. When ...
Input voltage: 9 V - 264 V
Output voltage: 24 V
Current: 230, 125 mA
... This supply unit is allowed for the operation of 24 VDC sensors, such as vent- and flowcaptors, with AC supply voltage. The supply unit contains a 24 VDC transformer rectifier and a switching circuit with output relay with potential free single pole ...
... Overview
Accessories for industrial radio remote controls, including monitor testers, anemometers (WIND DIN 2), wireless battery chargers (standard and compact), protective pouches and antennas (UHF, FLAT 870 and WHIP). Original REMdevice accessories ...
The BSB BC5 series overload protector can be used in power systems with a rated current of 3A to 50A, a frequency of 50/60Hz, and a voltage of AC 250V and DC 65V to protect against overload and short circuits. They are primarily used in industrial automation ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 5 A
... - External power supply for LCD monitors up to 19" TFT - Black housing - Input: 100 - 240 V AC IEC320 C14 3-PIN TYPE cold device socket - Output: Jack plug 5.5*2.5*9.5mm, cable length 1.8 m - 12 V, 5 A (approx. 45 W min.) - Load capacity: 15 kg - Standards, ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 1.5 A
... Power supply with AC-DC plug-in type converter in switching technology. - Protection: overload, temperature - Cable length: 1m - Dimensions: 59.3x30.7x75.6mm - Weight: 128g - HS code: 85044050 ...
M.A.E. S.r.l.
Input voltage: 115, 230 V
Output voltage: 15 V
Current: 1,600 mA
... AC-DC power supply plug-in type converter in switching technology, 15V, 1600 mA, 24 watt Depth: 75 mm Height: 74 mm Widt: 43 mm Status: ErP livello 2 Connector: Spina 5,5/2,1 Tipology: SYS 1308-2415-W2E Maximum inout tension: 264 ...
M.A.E. S.r.l.
Input voltage: 115 V - 230 V
Output voltage: 5 V
Current: 1,500 mA
... Charger 1 USB 1500 mA european plug 1 pins interchangeableplugs for universal use Switching power supply plug type Double coating Compact structure Protection againist shortcuit and overload EU CoC V5 tier 2 / EnergyStar DOE VI Supplied accessories 4 ...
M.A.E. S.r.l.
... filter reactor ： Filter reactor together with capacitors can combine harmonic circuit to reduce the harmonic current in the system , mainly 3rd , 5th , 7th , 11th , 13th and higher . Filter reactor can be installed by parallel or serial connection . Function ...
... filter reactor ： Filter reactor together with capacitors can combine harmonic circuit to reduce the harmonic current in the system , mainly 3rd , 5th , 7th , 11th , 13th and higher . Filter reactor can be installed by parallel or serial connection . ...
Input voltage: 125 V - 265 V
Output voltage: 24 V
Current: 0.4 A
... Product
Switching power supply D1, input 230Vac, output 24Vdc 400mA. 1 DIN module size.
Code
Model: PFTP100-Q2
Description
Compact DIN-rail switching power supply for control panels and automation applications. ...
Input voltage: 230 V
Output voltage: 5 V
Current: 0.6 A
... Product
Switching power supply PFTP000-R2 5 Vdc 600 mA
Code
Cod. PFTP000-R2
Description
Compact switching power supply with 230 Vac input and 5 Vdc output. Suitable for auxiliary low-voltage supply and small ...
Input voltage: 230 V
Output voltage: 13.8 V
Current: 5 A
... Product name
Switching power supply and battery charger PFTP800-P2 D8 230VAC 13.8VDC 5A
Short description
Switching power supply 230VAC with integrated battery charger output 13.8VDC 5A. Dual output terminals provide a dedicated ...
Input voltage: 90 V - 264 V
Output voltage: 12 V - 48 V
Current: 2.61 A - 14.17 A
... Overview
The LPP300 Series is a compact open-frame AC-DC power supply delivering up to 300 W (with airflow) in a low-profile 0.75 in form factor. Available nominal outputs are 12 V, 24 V and 48 V. Units meet Class B EMI (4th Edition) and provide ...
Input voltage: 85 V - 370 V
Output voltage: 12 V
Current: 1.25 A
... -DIN rail mount -Universal Input 85-264 VAC, 100-370 VDC -Output voltage 12 VDC -Output power 15 W -Output current 1.25 A -Dimensions 17.5 (1SU) x 90 x 55 mm ...
... Omal creates custom multiple connection systems for specific customer needs.
Our technical team work with the customer to define the data required for the circuit, including cable types, termination options with or without connectors, and the specifications ...
Output voltage: 220 V
... Product overview
220V to USB power supply module for powering Nexelec devices. The LOAD module converts mains 220V to a USB output and is designed for installation inside a flush-mounted box to enable surface mounting of Nexelec products.
Key ...