... The most comprehensive way to connect tubes – the Tube Connecting System The tube connecting system was the father to the thought “Connect without drilling and welding”. For more than 30 years, the system has continuously been extended and adjusted ...
Diameter: 21.2 mm - 42.5 mm
... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with velcro fastening, rotatable velcro strap holder incl. 50 cm velcro strap / maximum mobility with red MOVE insert, specially designed ...
flexa
Diameter: 21.2 mm - 42.5 mm
... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with screw-on plate / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and medium speeds ...
flexa
Diameter: 21.2 mm - 42.5 mm
... Product Overview
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder for mounting on profile rails / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and ...
flexa
... FLEX-SEAL Plus BC bushes are exclusively for use with joints in the Flex-Seal Plus and Flex-Seal ranges. These 100% EPDM bushes can reduce the inside diameter of the coupling used (or increase the outside diameter of the smaller pipe) thus compensating ...
... The T-SADDLE flexible elastomeric saddle is used to provide a quick and economical method of connecting laterals to existing sewers or drains. The T-SADDLE consists of an EPDM elastomeric sleeve and grade 1.4301 (304) stainless steel apron which provides ...
... T-SADDLE MULTI is a multi-material T-Saddle, intended for all gravity flow networks (rainwater or sewage), it works with : Corrugated pipes ; Or smooth pipes : PVC / PP / GRP / cast iron / clay / concrete. It’s an « all-in-one » solution : thanks ...
Clevises DIN 71752 / DIN ISO 8140 / CETOP RP102P are some of the most frequently used linking elements in industry. These parts can be found everywhere where simple movements are required, e.g. linear pulling, pushing or even axle offset compensation.
mbo Oßwald GmbH & Co KG
Clevis joints with folding spring bolt are connecting elements that are commonly used in industry especially for simple movement sequences, e.g. linear pulling, pushing, sliding or axial offset compensation. They are used in a wide range of applications ...
mbo Oßwald GmbH & Co KG
MBO Clevises are U-shaped or forked metal connectors to which another part can be fastened by means of a bolt or pin passing through the ends of the connector. Clevises are used commonly in the industry for carrying out pulling, pushing, linear pulling ...
mbo Oßwald GmbH & Co KG
... Formula symbols - Value - Unit - Description Material - EN 10270-1 - - - type of material d1 - 10 - mm - shaft diameter d2 - 9.2 - mm - groove diameter d3 - 9.1 - mm - inner diameter d7 - 0.8 - mm - wire diameter e - 2 - mm - width r - 0.5 - mm ...
... Insulation Clamps for Fixing of Metal Sheets PU:1 pieces ...
... PLIO® halogen-free studs are used to attach PLIO® or HELAVIA® strapping to hold cable harnesses together. They are available in a range of materials: > PS, black > PA, black > PA-V2, white Studs can be supplied loose or in bundles. A tool is ...
The PLIOCATCH halogen-free clip-on cable block is a cable fixing system that clips into electrical machines or cabinets. The range comprises 4 models in 2 colours, black and natural, to meet different requirements. These cable blocks can be used to add ...
... The PLIOCATCH screw-on fixing system for machines or electrical cabinets. The range comprises 5 models in 2 colours to suit different requirements. These cable blocks can be used to add or remove conductors in a space-saving way. Material: PA Colour: ...
... Reducer ring for direct clamping of mounted samples Outer diameter Ø 50 mm For mounted samples with Ø 25 mm, 30 mm, 40 mm, 1", 1 ¼", 1 ½ Can be used in rotary device and Easy adaption vertically / horizontally For use on: Qcut 150 A/M (clamping ...
... Material - : - Nitrile rubber 70 shore A Temperature range - : - -30 °C +100 °C ...
Cable diameter: 12.3 mm - 21 mm
Operating temperature: -40 °C - 150 °C
... Cap nut: Polyamid PA6 V2 Sealing ring: TPV Gland body: Polyamid PA6 V2 O-ring: NBR / EPDM Vent Part: Acrylic Co-Polymer on Nylon Support (Hydrophobic- Oleophobic) Connection thread: Metric (EN 60423), PG (DIN 40430) Benefits - Balance the pressure ...
Cable diameter: 12.3 mm - 21 mm
Operating temperature: -30 °C - 150 °C
... Cap nut: Nickel Plated Brass, Stainless Steel (AISI303/316L) Sealing ring: TPV Gland body: Nickel Plated Brass, Stainless Steel (AISI303/316L) Cable holder: Polyamide PA6 V2 O-ring: NBR / EPDM Vent Part: Acrylic Co-Polymer on Nylon Support ...
... CROSS BAR * NEW ACCESSORIES * Can be applied to the tools 130/230 Vertical and Horizontal, 125/AP3, 200/AP3 ...
... Articulated Cross Bar ** NEW Accessories ** Can be applied to the tools Horizontal/Vertical 130/230, 125/AP3 AND 200/AP3 ...
... AS-ASX BRACKETS SUPPORT BRACKETS FOR PUSH AND PULL ROD AS-ASX SERIES Material: Galvanized steel or AISI 304 stainless steel. Fastened by screws, not included in the supply. ...
Diameter: 4 mm - 16 mm
Length: 8 mm - 80 mm
... Malleable cast iron head with steel shank Radiuses acc. to DIN 316, i.e. ergonomic wings, no sharp edges Complete range M4x8 – M16x60 available while stocks last On request: Special lengths up to 300 mm, with partial thread, with special ...
BTS Befestigungselemente-Technik GmbH
Diameter: 4 mm - 12 mm
Length: 8 mm - 60 mm
... Cast brass version Radiuses acc. to DIN 316, i.e. ergonomic wings, no sharp edges Complete range M4x8 – M12x60 available while stocks last One-piece cast model ...
BTS Befestigungselemente-Technik GmbH
Diameter: 7.8 mm - 20.5 mm
Length: 6 mm - 60 mm
... Wing screws American form | Cold-formed From M3x6 – M12x60 available while stocks last On request: Special lengths and individual thread ends With flange beneath wing head, also available without flange on request Packaging:: Standard ...
BTS Befestigungselemente-Technik GmbH
... Application : For simple 90° angle fixing with low stresses ...
All Slot nuts made of galvanised steel with strip for centering Can be pivoted into any section of profile groove for normal fixing
Diameter: 3 mm - 12 mm
Length: 10 mm - 60 mm
CARCANO
The precision rings that CPM designs and manufactures have a dimensional limit between 10 mm bore and 800 mm external diameter and may be customized upon customers request.
... We manufacture bushings and spacer rings specifically for precision bearings. General Features They can be made in different geometries: cylindrical for roller tracks or spherical for ball bearings. Depending on the customer's request, they can be ...
THREADED STIRRUP FOR ISO PIPE - STAINLESS STEEL A2 - A4
BENE INOX
Diameter: 14 mm - 219 mm
LIGHT DUTY ROUND PIPE HOLDER WITH RUBBER PROTECTION - STAINLESS STEEL 316 - GALVANIZED STEEL
BENE INOX
Diameter: 25 mm - 104 mm
HINGED HEXAGONAL PIPE HOLDER WITH ROD - STAINLESS STEEL 304
BENE INOX
Diameter: 6 mm - 20 mm
Length: 12 mm - 60 mm
... Ball-ended thrust screws can also be used for clamping, tightening or supporting of non-parallel surfaces. The flat-faced, movable ball enables a flat load transmission. Material Ball Ball-bearing steel, hardened Stainless steel, hardened Screw ...
HALDER France
... Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. Material Ball Ball-bearing steel, hardened, bright Stainless steel 1.3541, nickel-plated Body Heat-treated steel, tempered, ...
HALDER France
... Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. Material Ball Ball-bearing steel, hardened, bright Stainless steel 1.3541, nickel-plated Body Heat-treated steel, tempered, ...
HALDER France
... Overview
Adjustable metal workstation holder designed for Zebra mobile scanners used at packing, receiving, and industrial scan stations. Heavy-duty two-segment swing arm organises scanner placement for repeated workflows, reduces workstation ...
... Overview
This metal forklift holder AG-FRK-01 is designed to secure Zebra grip-handle mobile computers at equipment side in warehouse, dock and material-handling environments. It creates a repeatable, equipment-mounted location for scanners ...
... Overview
High-performance graphite sealing rings manufactured from high-purity graphite. Designed for demanding industrial environments, these rings provide self-lubrication, low friction, chemical resistance and stable sealing under high temperature ...
In the contemporary industrial realm, pad printing technology finds extensive application across diverse surfaces, such as plastic, metal, glass, and ceramics. With the escalating demand for high-quality and durable prints, traditional pad printing rings ...
Metallized ceramic bushings are widely used in the joining process of ceramics and metals. Ceramics have excellent insulation properties and can be well combined with metals through the metallization process. In addition to standard bushings, INNOVACERA ...
... Stainless Steel Eyelet Rings is stamped and swaged from heavy gauge Stainless Steel sheeting for supreme weather and corrosion resistance. Stainless Steel is harder and more durable than plated brass. Product Part Number ID OD Height mm mm mm Stainless ...
... Stainless Steel Rectangular Lacing Anchor ( hooks ) are used for thermal insulation products, like expansion joints and removable-reusable thermal insulation blankets. Product Part Number Diameter Length GA Inch BST-RLA-1225 12 2 ...
... Stainless Steel Lacing Top are used for thermal insulation products, like expansion joints and removable-reusable thermal insulation blankets. Lacing Top BST-LT 2 hole ...
Diameter: 3 mm - 12 mm
... Searching for grub screws? If you are looking for plastic slotted pan head, socket head, hexagonal head, thumb head or crossed pan head screws or if you are looking for miniatures then you are definitely on the right site because Panozzo has an almost ...
PANOZZO Srl
Diameter: 3 mm - 24 mm
Besides the plastic plugs, Panozzo distributes also: fasteners, plastics washers, plastic spacers, plastic screws, slotted head screws, hexagonal head screws, slotted countersunk screws, tapping head screws, pan head tapping screws, uniscrew caps, hexagon ...
PANOZZO Srl
Plastic rivets and fasteners provide numerous methods for fastening or fixing multiple components together. PANOZZO SRL provide a variety of easy application fasteners, from push rivets and screw rivets, to arrow clips and grommet nuts
PANOZZO Srl
... Product name
LAN-103 Series Multi-angle level adjuster for precise equipment leveling and angular position adjustment.
General information
Screw: Steel (standard) or Stainless Steel (option)
Base material: Nylon
Order ...
... Product
Stainless Steel Level Adjuster LAS-104 Series
Material
Material (Main Body): Stainless Steel 304
Order Instructions
- Ordering format: LAS-104 - □□ - □□ - □□□
- Parameters (in order): (Base)
Shenzhen Milvent Technology Co.,Ltd
... Metal Ventilation Cable Gland, Pressure equalization elements - The reasons and the need for it: Why is the high tightness of the boxes not always good? Sealed enclosures IP66.IP67,IP68 are protected against water,other liquids,dust and moisture from ...
Shenzhen Milvent Technology Co.,Ltd
Shenzhen Milvent Technology Co.,Ltd
... Overview
Any type of carriers from C-mount to fully customized carriers can be manufactured according to the customers’ requirements. Our “Cross-edge” technology including cutting, plating, vapor deposition, and bonding provides an integrated ...