Other attachment devices

... HBE pump mounting plates are designed for a very wide range of applications in internal combustion engine pump drives and facilitate the mounting of hydraulic pumps to the flywheel housing.

• Mounting bracket for installing hydraulic pumps

... The FISSO articulated holder is a highly adaptable mounting hardware that makes it easy and safe to mount vision devices such as cameras and sensors in industrial environments. With just one central knob, it’s never been easier to position vision cameras, ...

... Compatible with T-Slot Aluminum frame 20×20, 30 x 30, 40 x 40 mm Adapter compatible with many machine vision cameras ...

... Various sizes and designs (see details) • KT1,  Clamping opening 25mm,   M6 Thread,      Steel               (Art.# 5.140) • KT1,  Clamping opening 25mm,   M6 Thread,      Aluminium     (Art.# 5.142) • KT2,  Clamping opening50mm,   M8 Thread,      ...

... NEFF’s BL mounting rails enable simple, stable, and flexible mounting of components in screw drive and linear motion applications. They facilitate quick integration into machine designs and ensure reliable installation of drive components.

Thanks ...

NEFF’s BP mounting plates enable the secure and precise installation of components in lead screw and linear motion applications. They ensure a stable connection within the drive system and facilitate the integration of lead screws into a wide variety ...

... NEFF’s GK spherical heads enable flexible and reliable connections between screw drives, linear drives, and mechanical motion systems. They ensure safe power transmission while also compensating for misalignment between connected components.

Thanks ...

... Aluminum seal- and centring ring for small flange in action Sealing and centring ring, aluminum, KF DN 20/25 ...

... Mounting bracket for installation of enclosures, PCB and other parts onto 35mm DIN rail.
Can be easily detached.
Bulk packaging is available.
Replacement product for the discontinued CKD-80.

Specifications

• Material : PP
• Max

... Economically priced end stopper bracket for use with 35mm DIN rail.
Can be used to fix terminal blocks or modules.
Screws included allow affixing of stopper brackets firmly at a fixed location.

Specifications

• Material : PA66
• Available

... Stopper bracket for use with 35mm DIN rail.
Can be used to fix terminal blocks or modules.

TKR-TWE1 is used with small DIN rail attachment parts.
For larger / higher attachment parts, TKR35-1 is recommended for providing additional support.

Specifications

• Material

... The 4B Sensor Mounting Kit is able to securely mount barrel sensors in position, including 4B’s range of 18 & 30mm wide inductive sensors. Made of Stainless Steel and Nylon 66, giving corrosion resistance as well as abrasion resistance and high melting ...

... DescriptionMaterial:GJL 250 annealed.On request:Other slot widths.Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm ...

... Angle bracket for magnetic lock Material: Steel. Version: galvanized. Note: These angle brackets enable the magnetic catch to be flexibly positioned. ...

... Locating pins with ball-end, Form B Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Note: Ball end locating pins are specially designed to ease the locating process. The tendency ...

With its extensive selection of connecting elements, the mk profile system gives you ultimate freedom in designing your profile structures. Whatever your requirements in terms of load capacity, twisting moment, ease of installation or design, our wide ...

Perpendicularity: 0.01/200 mm Material: aluminum casting Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with clamping and base surface Base surface: with hole pattern according to table or drawing, suitable for machine ...

Clamping thread (M): M12 Grid pitch (R): 40 mm ± 0.01 mm Grid hole (D): Ø 16F7 Grid hole (E): 12 mm Perpendicularity: 0.01/200 mm Clamping surface face: smoothed after nitration Hardness: 700-100 HV1 Material: case-hardened steel Alignment hole and centre ...

Parallelism: 0.01/200 mm Clamping surface faces: finely milled or smoothed Hardness: unhardened Material: case-hardened steel Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with base surface Base surface : with hole pattern ...

Chocolate brown (RAL8017) nylon plug. Copper plated stainless steel screw.

... White nylon plug. Copper plated stainless steel screw. Copper washer. Dutral gasket. ...

... We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions. Our ...

... We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions. Our ...

... We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions. Our ...

... Description
Mounting plate for cable tray systems made of GRP (glass-fibre reinforced polyester), pressed finish, pebble grey (RAL 7032). Designed for snap-on installation and supplied with pre-assembled fixing clamps for quick fitting.

Available ...

... Product description
GRP joint connector, vertical, screwable, pressed glass-fibre reinforced polyester, pebble grey (RAL 7032). Designed for vertical connection between elements of K² cable tray systems (KK, KKL).

Technical data

• Material:

... Description
Vertical joint connector for cable tray systems, screwable, stainless steel. Material codes: 1.4401, 1.4404 (AISI 316L).

Basic product information
Stainless steel vertical joint connector designed for K² cable tray ...

This kit provides all the necessary parts for attaching guy wires to an Indelec 4-section pole.

Used to fix a pole against a vertical or horizontal tubular support.

For lightning rod or elevation pole (2m height max) fixing on a wooden or concrete frame.

... Swivel clamps LKF of die-cast aluminum have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening the clamp to the place of use. The ...

... Swivel clamps LKF of precision-cast stainless steel have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening the clamp to the ...

... Sensor mounts SKF of die-cast aluminum have a sensor bore machined by cutting methods. The sensor bore is centered and parallel to the flange face. It can be used for attaching a sensor with male thread. The flange with two bores serves as an interface ...

Diameter: 34, 48, 40 mm
Length: 10 mm - 40 mm

... Threaded zinc plated steel stud. Material Black thermoplastic, glass fiber reinforced, mat. ...

Diameter: 6, 8, 10 mm
Length: 36, 28 mm

... Brass insert with tapped blind hole. Material Black thermoplastic, glass fiber reinforced, mat. ...

Diameter: 6 mm
Length: 30, 20 mm

... Threaded stainless steel stud (AISI 303). Material Black thermoplastic, glass fiber reinforced, mat. ...

... Overview
The FAS5050 single-sided fastener is designed for 90° heavy-duty connections in 50 mm extrusion series. Suitable for modular frames and industrial constructions where a compact, conductive 90° connection is required.

Compatibility

• PIL

... Overview
90° fastener for heavy-duty connections in the 50 mm profile series. Designed for mechanical assembly and conductive connections.

• Compatible profiles: PIL 5050
• PIL 5010
• PIL 5020

... Short description
Robotunits end-to-end fastener FAS 5061 for 50 mm series extrusions. Non-rotating on both sides; thread integrated in the connector plate. Supplied as a kit.

Application

• Used for end-to-end connections

AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision adjustment ...

AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision adjustment ...

AirLoc HZA horizontal supports are an important part of a complete AirLoc machine setup system. The delivery provides you with all required components including complete fixing materials. The threaded spindle with lock nut ensures precision adjustment ...

Diameter: 4 mm - 12 mm
Length: 25 mm - 300 mm

... Materials : steel, stainless steel Surfacing material : wide range [Please contact us for details] ...

Diameter: 2 mm - 48 mm

... Size : Inch size are also handled. {UNF, UNC, Whitworth} Materials : steel, brass, stainless steel, aluminum, S45C, SCM, SUS316L, SUS310S, SNB7 Surfacing material : wide range [Please contact us for details] Length : 285－300 [mm] ...

... Materials : steel Surfacing material : wide range [Please contact us for details] Size : M4－8 [mm] ...

JK Technic fastening systems allow you to fix gratings to metal structures quickly and securely. The choice of fastening system type depends on various criteria: grating type, mesh gauge, height and thickness of the bearing bars. JK Technic has a wide ...

JK Technic fastening systems allow you to fix gratings to metal structures quickly and securely. The choice of fastening system type depends on various criteria: grating type, mesh gauge, height and thickness of the bearing bars. JK Technic has a wide ...

JK Technic fastening systems allow you to fix gratings to metal structures quickly and securely. The choice of fastening system type depends on various criteria: grating type, mesh gauge, height and thickness of the bearing bars. JK Technic has a wide ...

... Overview
Hukx PMF01 is an anodized aluminum bracket for quick, stable mounting of one Hukx pyranometer. It is designed for installation on tubes, masts or platforms and supports horizontal mounting and Plane of Array (POA) orientation.

Option
VMA01 ...

... Overview

Dual pyranometer mounting fixture designed to hold two pyranometers simultaneously—one mounted horizontally and one mounted tilted. The PMF02 is suitable for surface or fence mounting and for installation in the Plane of Array (POA) ...

... Product overview

• The CMF01 is a crossarm mounting fixture designed to secure pyranometers, albedometers and net radiometers to standard crossarms used in meteorological and solar radiation monitoring installations.

An oil coolant tube magnetic base is an auxiliary fixing component used to secure the oil coolant tube to the coolant inlet pipe. It's main function is to stably fix the oil coolant tube in a designated position on the equipment via magnetic attraction, ...

... CONTROLLER ONE EVO PLANIGRAPHESP is a combined stem packing composed of expanded graphite rings PlanigraphESP and GR8622ESP braided graphite rings. Characteristics CONTROLLER ONE EVO PLANIGRAPHESP is manufactured with modified PlanigraphESP graphite ...

... Middle rings: Pure PLANIGRAPH graphite Top & Bottom rings: GR80SGR gland packing in expanded graphite with special metal reinforcement Impregnation with pure graphite and special compound Characteristics The CONTROLLER 2 EVO stands ...

... Reinforced graphite packing made with preformed rings of GR8622 type flexible graphite braided gland packing Characteristics The PGT3 GR8622 expanded graphite is a packing for industrial valves. The PGT3 GR8622 packing ensures high performance in ...

... The most comprehensive way to connect tubes – the Tube Connecting System The tube connecting system was the father to the thought “Connect without drilling and welding”. For more than 30 years, the system has continuously been extended and adjusted ...

Diameter: 21.2 mm - 42.5 mm

... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with velcro fastening, rotatable velcro strap holder incl. 50 cm velcro strap / maximum mobility with red MOVE insert, specially designed ...

Diameter: 21.2 mm - 42.5 mm

... Product Details
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder with screw-on plate / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and medium speeds ...

Diameter: 21.2 mm - 42.5 mm

... Product Overview
Tubing clamp systems for light, medium and heavy duty applications
Rotatable tubing holder for mounting on profile rails / maximum mobility with red MOVE insert, especially for cobots and small industrial robots at slow and ...

... FLEX-SEAL Plus BC bushes are exclusively for use with joints in the Flex-Seal Plus and Flex-Seal ranges. These 100% EPDM bushes can reduce the inside diameter of the coupling used (or increase the outside diameter of the smaller pipe) thus compensating ...

... The T-SADDLE flexible elastomeric saddle is used to provide a quick and economical method of connecting laterals to existing sewers or drains. The T-SADDLE consists of an EPDM elastomeric sleeve and grade 1.4301 (304) stainless steel apron which provides ...

... T-SADDLE MULTI is a multi-material T-Saddle, intended for all gravity flow networks (rainwater or sewage), it works with : Corrugated pipes ; Or smooth pipes : PVC / PP / GRP / cast iron / clay / concrete. It’s an « all-in-one » solution : thanks ...