Other storage equipment

... HBE cleaning covers are used to securely close inspection openings of a wide range of diameters, using either flange or central assembling. Besides Aluminium as standard material, all sizes are also available in normal or stainless steel. Types ...

... Small and medium-sized companies normally have a large number of different-sized containers with contents that represent an environmental hazard. If these are then to be stored at a particular location, with some of them vertical and some horizontal, ...

... For the storage of water-endangering liquids Lockable weather protection superstructure - therefore, suitable for outdoor storage Sump pallet made from 3 mm sheet steel as per WHG - Ü-sign according to StawaR Corrosion protection by priming and painting ...

... For the passive storage of fl ammable liquids The legally required 0.4-fold minimum air exchance rate is achieved by continuous ventilation slots directly above the base sump tray and ventilation slots in the upper area of back wall and door Ground connection ...

Carrying capacity: 200 kg

... Plastic Platform Truck 1.Three Shelves 2.Silent castors ...

Carrying capacity: 250 kg

... Plastic Utility Carts made of heavy duty plastic construction resists dents, chips and rust, are easily cleaned and virtually maintenance free. Ideal for use to organize and store items and parts for industrial, Material Handling, Hospitals, Medical, ...

The Drums Transport Rack contains a maximum capacity of 500 kg and the drum racking is UR55. The drums stack easily and safely, saving stock space.

... Presentation
The Orga 4501 ESD under-desk drawer module is a metal ESD storage unit manufactured from 1.0 mm steel with a powder-coated finish. It is designed for under-bench mounting on Forison Nova, Summit and Velar workbenches and for use ...

... Overview
Orga 4502 suspended ESD drawer module is an anti-static metal unit designed for EPA and ESD workstations. It provides two drawers with full-extension telescopic slides and a central cylinder lock. The housing is 1.0 mm steel with ESD ...

... Overview
The Orga 4503 ESD underbench drawer module by Forison is a metal ESD unit with three full‑extension telescopic drawers designed for ESD workstations and EPA areas where electrostatic protection and organised storage are required.

Key ...

... Product overview
The transport of powders and granular materials over long distances is a key requirement in many industrial processes. The DENSPLUS Pressure Vessel by VOLDE is engineered for dense-phase pneumatic conveying systems, enabling ...

... Application • Storage and transportation of heat-sensitive goods e.g. • Dry ice ( CO2 ) • biological samples • Food • Box complies with Euro standard IN-IR-RRC • Storage and transportation using cold packs Advantages • ...

... Pallet pull-out - get 30% more space out of your existing pallet racks These pallet pull-outs can be easily used with existing pallet racks. To do this, they are placed on the existing beams of your pallet racks and bolted to the beam in the rear area. ...

... Pallet pull-out for use in an existing pallet rack with 100% pull-out and 600 kg load capacity. Increase your existing rack capacity with picking locations by 30% through the usage of our pallet pull out units. Our pallet pull-outs enable ergonomic ...

... Pallet pull-out for use on the ground under an existing pallet rack with 70% pull-out and 800 kg load capacity Feet at the front and supports at the rear of the pallet pull-out enable a large pull-out capacity and make the pallet pull-out easy to handle. The ...

... This wire basket is the ideal complement to the TR034 trolley, allowing it additional carrying capacity. Features - Structure made of plastic-coated metal wires. Dimensions - (Width x Depth x Height) 405 x 365 x 180 mm Weight - 2.5 kg ...

Width: 2,900 mm - 3,800 mm
Capacity: 200 l
Height: 2,950 mm

... Butti anti-seismic shelving systems with spill containment pallet are designed for the safe storage of drums and ibc tanks in industrial environments, ensuring structural stability, operational safety and containment of accidental spills. Manufactured ...

Width: 800, 1,000, 1,400 mm
Capacity: 260, 500, 1,200 l
Height: 1,100, 1,330, 1,485 mm

... Product overview
Waste oil containers are engineered for the safe recovery, storage and disposal of used oils in compliance with applicable regulations. Manufactured by rotational moulding in high-density polyethylene (HDPE), they offer a monolithic, ...

Pallet for gas cylinder hot dip galvanized, with lifting hook and fork seats.

... Sensor Signal Converter S2C-2 with USB & RS-232
The S2C-2 Sensor Signal Converter is a compact signal conditioner for evaluating standardized industrial sensor signals. It enables the simultaneous acquisition of ...

Capacity: 30 l
Length: 400 mm
Width: 250 mm

The ADIAPACK crate is an isothermal crate manufactured using HDPE, with adiabatic technology. It is a stackable and long-lasting solution, designed for multiple uses, and thanks to its stackable feature when empty, reverse logistics costs are optimal. ...

... Description

• Suitable for the storage and transport of toxic or hazardous substances; designed to secure drums and protect against impacts and external agents.
• Approved UN 1H2 / X300 / S…
• Screw-top lid with hermetic seal
• Stackable
• Material:

Length: 800 mm
Width: 730 mm
Capacity: 150 l

... Robust transport container designed for platform vehicles and jobsite use. Manufactured in polyethylene to provide impact resistance, UV protection and low-temperature performance.

Main features:

• Suitable for platform vehicles
• Equipped

Length: 1,000 mm - 1,200 mm
Width: 800 mm - 1,000 mm
Height: 500 mm - 650 mm

... Description
These sheet‑metal medium containers are designed for a range of industrial applications. They are suitable for storage and handling of materials, transfer of semi-finished parts and scrap, and for disposal of various types of waste.

Finishes ...

... COMPOSITION OF A STANDARD BUNGALOW
Galvanized steel structure
50 mm sandwich wall panels
Rainwater drainage system
Handling hooks
Standard colour RAL9002

DIMENSIONS
Available area: from 1 m² up to 1 000 m² – modular ...

This automated pallet shuttle racking system (Shuttle) provides a compact, high-density storage solution for industrial warehouses. A remotely controlled shuttle moves loaded pallets along rails into the correct positions inside the rack while the forklift ...

... Description
Support for one 200 L drum designed for orderly, space-saving storage. The drum is stored horizontally to facilitate pouring and transfer operations. Multiple units can be stacked to increase storage capacity by using vertical space.

Features

• Capacity:

... Description
The 200 L drum support allows orderly and secure storage of drums. Drums are stored horizontally, facilitating transfer operations. When used with a spill containment sump placed under the support, it enables safe transfer operations.

Main ...

... Short description
Support for two 200 L drums or three 60 L drums allowing orderly and secure storage. Drums are stored horizontally to facilitate pouring operations.

Main features

• Orderly and secure drum storage
• Holds

Available in version with and without belt for Brick and T Series remote controls.

... Alligator silo liners • More than 30 years’ experience in silo liners. • Storage for hot or cold water. • Available in various high-quality foils. • Installation takes place over the edge of the tank using stainless steel cables and ratchets. • If ...

... • Water silos cover up to Ø 15.00 m. • Construction is very light and, due to the well thought-out construction, gives a low load on the water silo. • Assembly can be done quickly with a small number of assistants. • Water silo is always accessible ...

... • Has proven itself over the past 20 years in the successful control of algae in water silos. • 100% results: no more algae in your water silo. • Reliable, durable, floating anti-algae cover. • Developed and patented by Albers Alligator. • ...

... - This special table, thanks to its small dimensions and mounted wheels, can be easily moved to the place where it is needed. - The wheels with a brake to lock table in place position. - The table can be used for packing elements, assembly of larger ...

... - The table can be used for packing elements, assembly of larger parts. The tilting top allows easy removal or placement of the element from an almost vertical position. - Table made of powder coated steel profiles. - Table top finished with stainless ...

... - Table has butterfly folding function that allows to flip upholstered elements. - Safety system preventing the dropping of the tabletop in case of a power outage. - Remote control (on wire). - Carpet-covered tabletop (option). - A possibility of ...

... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 27 available input/output modules 60 logical channels colour LCD display 3.5" TFT, with touchscreen recording data with maximum ...

... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 41 available input/output modules 90 logical channels colour LCD display 5.7" TFT, with touchscreen recording data with maximum ...

... temperature meter in a small case two-coloured display (4-digits, IP 40) input: thermoresistance or thermocouple 0, 1 or 2 REL / OC outputs RS-485 / Modbus RTU automatic recognition of 3 and 4-conductor connection (RTD inputs) ...

... Lid to be filled with concrete. Made of stainless-steel AISI-304. With rubber gasket for hermetic sealing. ...

Rack Sentry® rack protectors attach to your rack uprights, protecting them from the abuse from collisions with your forklifts. Constructed of a flexible EVA material, Rack Sentry gives your racks a highly visible layer of protection that’s easily installed ...

Rack Sentry LT rack guards are specially formulated to withstand impact in environments much colder than the original Rack Sentry model products. The difference is that the newer model rack guards are molded of a special polymer that allows flexibility ...

The Rack Sentry Cutout (RS75 CO) protection product features a cutaway section on the return arms to allow it to be placed on racking with beams located down to 5″ from the floor. This option allows the use of Rack Sentry® on virtually any upright. Previously ...

... Safety work bucket for extraordinary maintenance lifted by forklift truck. FORKABLE AERIAL MAINTENANCE BASKET The basket for maintenance is a container with base to use fork mounted on a forklift also certificate for the lifting of persons. It is complete ...

Capacity: 1,400, 2,000, 2,750, 2,060 l

... CONTAINERS WITH OPENABLE BOTTOM - ONE OPENING - FOR SEPARATE COLLECTION AND INDUSTRIAL WASTE Containers made of electro-welded steel, powder coated, equipped with feet. Ideal for use in the separate collection of urban, artisanal, and industrial waste, ...

The FP CARGO 80-100 folding containers are stackable and made of galvanized mesh, providing an efficient solution for transport and storage across various industries. These containers optimize vertical space when stacked and reduce their volume to a quarter ...

... The Mod'huile CHV2 collector allows to recover used vegetable oils safely and in accordance with the regulations. Very large window allowing the pouring of several cans at the same time for a saving of time for the user. Collector complying with ...

This 1 750 L self emptying container, reference CAV1750-4190, allows the storage of pellets for example with an emptying that can be dosed thanks to its manual trapdoor on the bottom. Its forks will allow its displacement with a forklift. Its smooth interior ...

Capacity: 250, 500 ml
Height: 88, 106 mm

The range is manufactured from a special grade of metal detectable polypropylene (PP). Polypropylene has very good chemical resistance. The whole range is manufactured in cleanroom conditions and packed in a ISO Class 7 (10,000) cleanroom. This ensures ...

Volume: 15, 20 l

... Our heavy duty buckets are available in 15 and 20 litre sizes come with a handy pouring spout. This makes emptying fast and simple. The buckets are manufactured from 316L stainless steel. They are designed for heavy duty use in pharmaceutical, chemical ...

Volume: 6, 15, 10, 12 l

... Our Stainless Buckets are made from heavy gauge stainless steel and are very durable. They are ideal for general purpose factory work. The buckets come with an optional lid. The swing handle means they can be lifted easily. The 10, 12 and 15 litre buckets ...