3 ton jacks
Lifting height: 550, 520, 540 mm
Height: 130, 140, 145, 155, 160 mm
Weight : 45 kg - 90 kg
SERIE MEDIA Middle capacity series Nylon wheels Rubber-covered support
Lifting height: 465 mm
Height: 133 mm
3T mutil purpose car and LCV floor jack Force: 3 t. Maximum lift: 465 mm Minimum under-body clearance: 133 mm. Quick-lift device brings jack into contact ...
Lifting height: 515 mm
Height: 95 mm
Weight : 39.5 kg
Item name - FOOT PEDAL TROLLEY JACK 3T 95mm Product highlight - Dead man type descent Manoeuvrability Specifications: - fast lifting dual pump system - foam protection on handle - foot pedal ...
Lifting height: 435, 280, 325, 290, 300 mm
Height: 30 mm
Weight : 105, 135, 180, 260 kg
... extencion (arms extracted) - 1625 mm 496/3M – 496/3P Technical Data Capacity - 3.000 kg Min. extension (arms retracted) - 935 mm Max. extencion (arms extracted) - 1725 mm 403M ...
Lifting height: 480 mm
Height: 181 mm
... lever arms For heavy vehicles weights Suitable for narrow spaces High level of stability Ideally suited in combination with jack for the neutralizing and bracing of a load Heavy steel construction PROPERTIES Colour: ...
Lifting height: 100 mm
Stroke: 200 mm - 310 mm
Weight : 5 kg - 30 kg
CB Series – Hydraulic bottle jacks Features: • Complete range of hydraulic bottle jacks. • CB Series with load-bearing piston with riser screw. • Equipped with adjustable extension screws ...
Mechanical cable drum trestle, with safety hand crank and handle with stable base plate, mobile version
... tensile and compressive loading. The winch can be utilised in any position. The winches are produced in three load classes: 1.5 t 3 t 5 t. The robust design with milled gear rack and hardened gear components is suitable ...
Lifting height: 140 mm
Height: 250 mm
Pressure: 0 bar - 520 bar
ECO-Jack® heavy duty hydraulic jacks are available in five different series with payloads up to 25 tons. The adjustability of the lifting claw on all ECO-Jack® is patented ...
Weight : 64 kg
The mechanical jack allows you to unwind the cable ( pay-off ) from drums with safety. You can use it in combination with a winding a machine or using it for cable installation. Range of application To unwind drums ...
Weight : 60 kg
... Ø with a maximum weight of 3.000 kg, • With axle holding mechanism • Adjustable in height to place it level with the reel hole. • Lifting of reel by hydraulic jack actuated by pedal. • Good sized ...
Capacity:3 ton Height-saddle-min.:145 mm height-saddle-max.:500 mm Totale lengte:660 mm !:semi-professional Length mm:1630 Width mm:350 Height mm:500 Intrastat: 84678900 Weight kg:38 Warranty:24 Months
Lifting height: 100 mm - 580 mm
Weight : 50.5 kg
Characteristics: Capacity: 3T Weight: 50,5Kg Minimum height: 100mm Maximum height: 580mm WARNING!! 1. This is a lifting device ONLY. Do not move or dolly the vehicle while on the jack. 2. The ...
CONSTANT PROGRESS An exclusive design implemented in a range of 19 compact, functional models is the best response to today’s constant progress in vehicle construction. The built-in safety valves prevent accidental overloads and prevent ...
Height: 112 mm
Stroke: 228 mm
Pressure: 8 bar - 10 bar
Pneumatically controlled jacks consisting of a highly resistant diaphragm and internal telescopic guide. These jacks are fitted with a limit stop device as well as a safety valve making them absolutely ...
Height: 88 mm
Stroke: 588 mm
Pressure: 7 bar - 10 bar
Air hydraulic trolley jack, practical and easy to handle. Now equipped with pivoting wheels to facilitate use even in the smallest spaces. Thanks to its minimum height (88 mm), maximum height (676 mm) and capacity (2,5 ...
Lifting height: 85 mm - 500 mm
... Compatible with our floor jack extension (MFJ-E). SAFETY WARNING: Never get under a vehicle that is not supported by a certified and proper jack stands. Validate lifting capacity before use. Correct ...
Lifting height: 95 mm - 515 mm
... without scratching garage floors. • - Keep the lug nuts at hand in the built-in tray. • - Backed by a 3-year warranty. Our 3-Ton Professional Floor Jack’s low-profile ...
ST-HBT-11 Hydraulic A-frame Lifting Trolley is small, robust and powerful. Due to its loading capacity of 3000kg, the trolley can transport A-frame weighing up to 5000kg. Safe lifting and lowering operations can be performed with this ...
Lifting height: 350, 300 mm
Carl Stahl's manual lifting equipment has a hand-driven spindle support for adjustment and support purposes. It is constructed with a powerful rectangular tube, and a spindle with self-lock trapezoid thread. The bevel gear of the device ...
Lifting height: 15 mm - 285 mm
Lifting height: 500 mm
Height: 115 mm
1 Ergonomically designed handle. Rubber coated. 2 Quick-approach foot pedal. 3 Long reach chassis. 4 Built-in safety lowering control valve for safe lowering. 5 Built-in pressure relief ...
Lifting height: 150 mm
Height: 510 mm
3T FLOOR JACK RATED LOAD: 3T MIN.HE1GHT: 150mm MAX.HEIGHT: 510mm PACKAGE SIZE: 74x35x21cm QTYIN 20: CONTAINER: 500PCS
Lifting height: 545 mm
Height: 130 mm
Hydraulic trolley jacks for cars. Support holder with wide base Nylon wheels (SCM 30EB-SCM 30EB PLUS) Hand descent-control Capacity 3 t DOUBLE PUMP Minimum height 130 mm Maximum height 545 ...
Lifting height: 500 mm
Height: 170 mm
Normal 3 Tons Hydraulic Garage Car Lift STOCK CODE : BŞR - 03
Air Hydraulic Service Jack - 3 Ton Capacity Easy to operate - push button floor jack with an air pump. Designed for use on trucks, automotive and agricultural equipment. Extra ...
Lifting height: 300 mm
Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable laying and pulling for low and high voltage cables Features Inspected and certified Designed ...
Lifting height: 800, 565, 700 mm
Rack & Pinion jacks for easy and secure lifting, lowering, adjusting or fixing of mechanical components, machines, windows, sluice gates etc, Lifting capacity 500kg – 5000kg Easy operation Robust version ...
Your suggestions for improvement:
Receive updates on this section every two weeks.