Diameter: 6 mm - 19 mm
Operating pressure: 10 bar
... Temperature Range -20°C, +200°C Working Pressure 10 Bar Type Water ...
TEKNO-MET BAĞLANTI ELEMANLARI SAN. ve TİC. LTD. ŞTİ
... The standard bend fitting for certain dry granular materials is unique to the Denseveyor® system and comes in 30, 45, 60, 75, and 90 degrees. It is a compact, easily installed fitting for redirecting ...
Diameter: 4 in
... gelatinous proppant (sand) slurry used at hydraulic fracturing sites Description Male hammer union x female hammer union 45° elbow Features No welds or pipe threads to deteriorate to cause premature leakage ...
Diameter: 10 mm
FREN TUBO S.R.L.
Diameter: 0.75, 1 in
... The TDW 45°swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The 45°is installed between the nozzle and hose to reduce strain, providing ...
Diameter: 20 mm - 200 mm
Operating pressure: 15 bar
... applications. Fire resistance Fittings are all in aluminium, non-flammable and with no propagation of flame. Materials piping is made of 6063-T5 calibrated alloy aluminium and is powder coated outside, pipe, fittings, ...
Airpipe Europe
Diameter: 40 mm - 225 mm
Operating pressure: 10 bar
... Branches less than 45° enable high flexibility when integrating them into a piping system. This is further increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches ...
Reinert-Ritz GmbH
Diameter: 16 mm - 140 mm
Operating pressure: 16 bar
... Series of fittings designed for conveying fluids under pressure with a metric solvent weld jointing system Standards: EN ISO 1452, EN ISO 15493, EN 727, DIN 8063 ...
Effast
Diameter: 80 mm - 710 mm
... duct bends (elbows), pressed or segmented, for use in process ventilation / dust collection systems. Available in 90°, 60°, 45°, 30°, and 15° (other degrees on request) and in galvanized or stainless steel construction. ...
Diameter: 50 mm - 800 mm
Plastic wye tee formed part round with interior stop for connecting pipes by welding (or PVC bonding up to Ø 250). Manufactured by the process of injection moulding (Ø 50-315) or prefabricated (from Ø 355, PVDF from Ø 450
... are used where e. g. clearance between tool and work piece is limited and for cross bores. The direction can be 90°, 60° or 45°. . They are often used with Split Ball probes, plug gauges BMD or Plunger Probes. ...
Diameter: 10 mm
... Specifically designed for the connection of coolant lines to mould tools Advantages Suitable for Water, Grease, Air & Oil with locking rings, springs & locking balls made from stainless steel. Available with or without valve Optimum ...
Kee Connections
... 316L, SS 304L, A105 Pipe or plate made, Seam and Seamless type, Thickness Sch. 05/ 10/ 20/ 30/ 40/ 60/ 80/ XS/ XXS, Types Elbow 45/ 90/ 180 degree (Return), Tee, Cap, Concentric/ Eccentric, etc. ...
Diameter: 50 mm - 1,250 mm
... HOKA PVC 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8062, R=D manufacturing process: Ø 50 to ...
HoKa GmbH
Diameter: 32 mm - 315 mm
... UPVC fittings without heavy metals, used in all security for systems of waste waters within the buildings. Field of application Waste water conducts within buildings Ref. standards UNI EN-1329, NF EN-1329 Dimensional range OD 32 – ...
Diameter: 15 mm - 350 mm
... manufacture all the standard fittings as found in ASME B16.5 as shown in the dimension table below along with other fittings such as short branch tees, instrument tees, reducing flanges etc. We also supply the full ...
... sizes are manufactured, instead, from welded pipes or steel plates. The three most common types of elbows in piping are the 45, 90, and 180 degrees (or return elbow) ...
Diameter: 40, 50, 100 mm
Operating pressure: 10 bar
... suitable for the 45-degree Angle electric fusion connection of two double-layer anti-seepage composite pipes; • HDPE raw materials; • rated service temperature: -40℃ to 50℃ ...
Zhejiang Resin Municipal Facility Co.,Ltd
Diameter: 15 mm - 1,400 mm
... Types: Pipe Elbows ( 45 Degree / 45 D) Manufacturing standards: ANSI, ISO, JIS, and DIN Wall Thickness: from SCH5 to SCH160 Materials: carbon steel, stainless steel ...
Diameter: 4 mm - 38 mm
... Connection - Sealing head 24° outside cone O-ring sealing with metric nut S series Standard - ISO 8434-1 Application - TE / SN / SC / SN-K / PTFE flexible tubes Material - Steel Surface protection - Zinc-electroplated Note - a) not according to ISO ...
Dietzel
Diameter: 26, 32, 40 mm
... produces a wide range of multi-profile press brass fittings (DeltaPress Water) suitable for the distribution of hot and cold water for domestic use and for heating and cooling systems. These fittings are designed and ...
Diameter: 32, 40, 50, 63 mm
Operating pressure: 0 bar - 16 bar
... Sprint is a group of push-in couplings that combines strength, safety, durability and user friendliness. The interaction between the push-back ring, O-ring and the clamp ring gives a safe, leak free and tensile connection without the use of special ...
Isiflo AS
Diameter: 2.5 in - 6 in
Operating pressure: 10 bar
... - PVC-U = Unplasticised Polyvinylchloride Manufacture - Injection moulded ...
Diameter: 0.125 in - 24 in
... stainless alloys or carbon steel to customers around the world. Our stock and fabrication includes seamless butt weld (BW) fittings from 1/8 “to 12” and flanges from 1/4 “to 24”. The range of schedules (Schedule) covers from SCH10 to ...
Diameter: 15 mm - 100 mm
Operating pressure: 25 bar
... Oil, Gas, Petro-Chemical Product Description Y type Tee, Malleable iron cast Fittings, pipe fittings shape is like a letter Y, branch pipe and main outlet 45° angle, the main outlet ...
the best suppliers