90° angle fittings

Diameter: 9 mm - 48 mm

This 90° elbow allows for easy installation, quick assembly, is easy to disassemble, highly-tensile and has high sealing performance. It has a wide application range and is also for applications with ...

Diameter: 16 mm - 63 mm
Operating pressure: 2 bar

Benefits 90° elbow allows easy installation Fast assembly High tensile strength Watertight Vibration protection Application range In combination with protective conduit: ...

Diameter: 16 mm - 32 mm

SILVYN® FLEXILOK 90° M - angled metric threaded conduit fitting extremely economical 90° elbow allows easy installation Small purchasing unit

Diameter: 7 mm - 11 mm

*360° turning*90° flexing hose connectors*Male / Female thread

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

... order to contain the head of a screw within the overall dimensions of the fitting.There are push-in fittings for metric pipes in the diameter range of 3 to 14, and push-in fittings for ...

Diameter: 4 mm - 15 mm
Operating pressure: -0.99 bar - 60 bar

• Body: OT58 brass • Maximum pressure 870 psi, 6000 kPa 60 bar • For use with copper tubes

Diameter: 5 mm - 15 mm
Operating pressure: -0.99 bar - 18 bar

• Body: OT58 brass • Maximum pressure 261 psi, 1800 kPa 18 bar

Diameter: 6 mm - 16 mm
Operating pressure: 12 bar

Fluid : water, oil, coolant All pH-neutral utilities ID Passage : Ø 6, 9, 12 and 16 mm Temperature : Water: max. 100°C Oil: max. 150° C Pressure : P.N. 16 bar Construction : Coupling: brass body - Bush: Stainless ...

Diameter: 6 mm - 12 mm
Operating pressure: 16 bar

Fluid : water, oil, coolant All pH-neutral utilities ID Passage : Ø 6, 9, 12 and 16 mm Temperature : Water: max. 100°C Oil: max. 150° C Pressure : P.N. 16 bar Construction : Coupling: brass body - Bush: Stainless ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

Fluid : Air Diameter : Tubes OD 4 to 16 mm Pressure : 0 to 10 bar Temperature : 0 to 60° C Construction : Thread: Nickel-plated brass Construction : polymer (except straight adaptors) Compatible with : PU - ...

Diameter: 4, 9, 6 mm

... reinforcement. These fittings are of semi-rapid type. The fixing of hose is done by manual screwing of the reeded bush without requiring any keys. Male and female threaded connections are available as per customers' ...

Diameter: 0.06 in - 2 in
Operating pressure: 1,800 psi - 10,500 psi

Diameter: 2 mm - 16 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa

One Touch Fittings KQ2 - NEW •One-touch fitting, a general purpose PBT material •Applicable tubing from Ø 2 to Ø 16 •Threads, sizes: M, R, Rc, G, NPT, UNF, UNI from M3 to 1/2 •Operating pressure ...

Operating pressure: -0.95 bar - 15 bar

- Whitworth pipe thread DIN ISO 228- Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working ...

Operating pressure: -0.95 bar - 16 bar

- Whitworth pipe thread DIN ISO 228 - chambered O-ring - Seals FPM - Material AISI 316L (1.4404) - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - Not designed for steady ...

Operating pressure: -13 psi - 218 psi

- Whitworth pipe thread - Chambered O-ring - Sealing NBR, FKM - Material brass nickel-plated - Temperature range 32 to 122 °F (0 to +50 °C) - Working pressure range -13 to 218 psi (-0,9 to 15 bar) - Speed 800 rpm - Hybrid stainless ...

Diameter: 32 mm - 125 mm

90° manifold for direct fitting to the blower/exhauster body.

Diameter: 0.38 in - 2.5 in
Operating pressure: 100 bar - 315 bar

SAE flanges are made of steel, GAS and NPT threaded, weld in and weld on, standard or 90°. The same for double flanges and counterflanges. Blind flanges, cut and uncut SAE split flanges, SAE adaptors complete the range. Standard ...

NORMAQUICK®MK connectors have been developed with the aim to achieve significantly reduced permeation rates. NORMAQUICK®MK provide a perfect link between the tank and the pipe system in cases where existing standard connectors are prone ...

The TWIST II was brought to the market to connect plastic air intake or cooling system pipes in order to get leak-proof connections. By using the TWIST connector system, you can combine your design with plastic, aluminum or steel tubes. ...

Diameter: 20 mm - 63 mm
Operating pressure: -0.99 bar - 16 bar

... flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any fires - Push-in fittings for installation of compressed-air pipelinesa - Totally metallic system

Diameter: 6 mm - 100 mm
Operating pressure: 16, 20 bar

FEMALE / FEMALE 90° ELBOW (CASTING) - STAINLESS STEEL 316 (Model : 5244) Series 52 - Fittings and piping accessories

Diameter: 6 mm - 100 mm
Operating pressure: 16, 20 bar

MALE / FEMALE 90° ELBOW - STAINLESS STEEL 316 Model : 5246) Series 52 - Fittings and piping accessories

Diameter: 8 mm - 50 mm
Operating pressure: 16, 20 bar

FEMALE / FEMALE UNION 90° ELBOW (CASTING) - STAINLESS STEEL 316 (Model : 5252) Series 52 - Fittings and piping accessories »

Diameter: 0.13, 0.06 in
Operating pressure: 0 psi - 125 psi

The F-3144 Series by Air Logic features its either nylon or polypropylene made small sized barbed elbows which are cost efficient. It comes with a maximum supply pressure of about 125 PSI and an operating temperature of -50°C to 82°C ...

Diameter: 0.44 in
Operating pressure: 42 bar

The WEH® TW111 Filling Connector is now available with a reduced outside diameter of only 25 mm. It is specifically designed for filling and maintenance of refrigeration and air conditioning systems and plants. Compared to conventional ...

Diameter: 25 mm
Operating pressure: 4,200,000 Pa

The WEH® TW111 Filling Connector is now available with a reduced outside diameter of only 25 mm. It is specifically designed for filling and maintenance of refrigeration and air conditioning systems and plants. Compared to conventional ...

Type: BT-FITTINGS-BW (Butt weld fittings) SS 316L, SS 304L, A105 Pipe or plate made, Seam and Seamless type, Thickness Sch. 05/ 10/ 20/ 30/ 40/ 60/ 80/ XS/ XXS, Types Elbow 45/ 90/ ...

Diameter: 40 mm - 50 mm
Operating pressure: 4 bar

Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on rigid PVC-U pipe ...

Diameter: 10 mm - 400 mm
Operating pressure: 5, 6, 10, 16 bar

Designed for usage of 25 years with media water and 20°C media temperature Due to: ISO 727, DIN EN ISO 1452, DIN EN ISO 15493 and ISO 7-1 Optimized for the process of dry installation

Diameter: 20 mm - 50 mm
Operating pressure: 10, 16 bar

Designed for usage of 25 years with media water and 20°C media temperature Due to: ISO 727, DIN EN ISO 1452, DIN EN ISO 15493 and ISO 7-1 Optimized for the process of dry installation

Diameter: 0.5 in
Operating pressure: 10 bar

Diameter: 1 in - 8 in
Operating pressure: 0 psi - 3,000 psi

Provide 360° movement between piping system elements in one or more planes for the conveyance or transfer of fluids. They are used primarily in applications such as automatic car wash installations, loading arms for fluids supply ...

Diameter: 0.38 in - 2 in
Operating pressure: 0 psi - 700 psi

This is the direct method to handle rotary and angular alignment motion with positive sealing between piping system elements. They are used primarily on platen presses, food processing machinery and particle board presses.

Diameter: 80 mm - 630 mm

Diameter: 60 mm - 630 mm

Diameter: 80 mm - 300 mm

Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar

Diameter: 4 mm - 10 mm