690 V fans

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 4,987 m³/h - 237,000 m³/h
Diameter: 280 mm - 2,000 mm
Rotational speed: 750, 500, 1,500, 1,000, 3,000 rpm

Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters. • ...

Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1

Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation ...

Air flow: 40,000, 25,400, 33,630, 22,700 m³/h
Diameter: 400, 1,850, 630, 800 mm
Rotational speed: 1,440, 1,460, 1,435 rad.min-1

Axial fans designed for free air discharge over long distances. Equipped with inlet cone and safety net on the inlet, outlet cone, feet fixed to the body. Suitable for outdoor use. Weatherproof. • Operating temperatures: ...

Air flow: 5,470 m³/h - 24,405 m³/h
Diameter: 400 mm - 710 mm
Rotational speed: 1,500, 3,000 rpm

Wall-mounted fans for mounting on the walls of industrial and large-volume rooms. They transport air in low resistance installations. Often used to evacuate large quantities of warm air accumulated in summer under the ...

Air flow: 6,107 m³/h - 33,356 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 935 rad.min-1 - 1,440 rad.min-1

Axial fans for localised ventilation or stationary cooling. Built on a mobile frame with adjustable air discharge angle. Industrial design, for operation in production plants where workstations require continuous or periodic ...

Air flow: 2,665 m³/h - 56,200 m³/h
Diameter: 315 mm - 1,250 mm
Rotational speed: 3,000, 1,500, 1,000 rpm

Explosion-proof axial fans. Designed for operation in installations where a potentially explosive atmosphere exists (gas hazard), as per standard PN-EN 13463-1:2003 and directive 94/9/EC (ATEX). • Impeller material: ...

Air flow: 2,910 m³/h - 39,315 m³/h
Diameter: 315 mm - 1,000 mm
Rotational speed: 3,000, 1,000, 1,500 rpm

High-temperature axial fans. Used in installations where the temperature of the flowing air can reach up to +105°C. Equipped with a special motor and impeller. Designed for continuous operation at high temperatures. • ...

Air flow: 8,775 m³/h - 33,778 m³/h
Diameter: 500 mm - 1,250 mm
Rotational speed: 1,500, 1,000 rpm

Axial fans designed for continuous operation at a maximum temperature of +135°C. A safe, proven and reliable design for high temperature systems. Every design element of the Type 135HT fan differs from ...

Air flow: 1,450 m³/h - 5,600 m³/h
Diameter: 280 mm - 1,250 mm

Roof ventilators – axial. Characterised by very high efficiencies in the low pressure range. Designed for industrial use. Resistant to atmospheric conditions. Optionally, they can be made in a supply version. • Operating temperatures: ...

Air flow: 3,504 m³/h - 75,723 m³/h
Diameter: 250 mm - 630 mm
Rotational speed: 1,000, 3,000, 1,500 rpm

Radial low-pressure fans. Designed and engineered for high capacity pumping. Equipped with impellers with backward curved blades, which results in very high efficiencies. They have large inlet diameters in relation to ...

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

Air flow: 2,440 m³/h - 24,490 m³/h
Rotational speed: 950 rpm - 1,480 rpm
Noise level: 45 dB - 78 dB

400 ºC/2h and 300 ºC/2h extractor fan units with linear inlet and outlet 400 ºC/2h extractor fan units with acoustically insulated boxed for immersed operation in fire risk zones. Fan: • ...

... : • IE3 efficiency motors. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). Finish: • ...

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

Air flow: 1,908 m³/h - 38,002 m³/h
Rotational speed: 535 rpm - 2,615 rpm

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

Air flow: 3,580 m³/h - 24,610 m³/h
Rotational speed: 635 rpm - 2,975 rpm
Noise level: 58 dB - 80 dB

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

Air flow: 4,800 m³/h - 38,000 m³/h
Rotational speed: 600 rpm - 1,500 rpm

... -phase, 2-speed and 8-pole. • Class F motors with ball bearings and IP55 protection. • Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW). • Working ...

Air flow: 14,550 m³/h - 123,700 m³/h
Rotational speed: 1,435 rpm - 2,935 rpm
Noise level: 50 dB - 68 dB

Unidirectional Jet fan, very robust with cast aluminum impeller for medium thrust. Specially designed for tunnel ventilation and smoke evacuation in case of fire, certified 400 ºC/2h and 300 ºC/2h according to model. Fan: • ...