- Environment - Health - Safety >
- Air Treatment and Noise Management >
- 230VAC fan
230VAC fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Rotational speed: 2,800 rpm
Noise level: 10 dB
Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...
Air flow: 0 m³/h - 250 m³/h
Diameter: 133 mm
Rotational speed: 2,100 rpm - 3,930 rpm
... centrifugal fans are available with forward and backward-curved blades. The quiet-running centrifugal fans with forward-curved blades are also supplied with a scroll housing. The centrifugal fans ...
Air flow: 35 m³/h - 850 m³/h
Noise level: 48 dB - 71 dB
... with embossments on the rear grille Main features of our filters fans fo electrical cabinets Sizes: 10, 15, 20, 25, 30 Power supply: available in 230Vac and 115Vac, ...
Air flow: 186.9 m³/h
Diameter: 38 mm
Noise level: 44 dB
... dual ball bearing axial fans offering a cost effective cooling solution without sacrificing on quality or reliability. Provided are a robust die-cast aluminium frame and an AC shaded pole impedance protected motor, these ...
RS PRO
Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm
ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz ...
ROSENBERG VENDÔME
Air flow: 400 m³/h - 1,100 m³/h
Diameter: 120 mm - 180 mm
ECOFIT Double inlet centrifugal fans AC single phase motor Forward impeller galvanized steel, Impeller diameter of 120 up to 180mm, AC single phase capacitor external rotor motor 230V50/60Hz and ...
ROSENBERG VENDÔME
Air flow: 310 m³/h - 2,700 m³/h
Diameter: 170 mm - 400 mm
ECOFIT axial fans AC single phase and three phase motor Plastic and black painted steel propeller, air direction “A” or “V”, Propeller diameter of 170 up to 400mm, AC single phase capacitor external rotor motor ...
ROSENBERG VENDÔME
Air flow: 4,987 m³/h - 237,000 m³/h
Diameter: 280 mm - 2,000 mm
Rotational speed: 750, 500, 1,500, 1,000, 3,000 rpm
Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters. • ...
Planetfan
Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1
Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation ...
Planetfan
Air flow: 40,000, 25,400, 33,630, 22,700 m³/h
Diameter: 400, 1,850, 630, 800 mm
Rotational speed: 1,440, 1,460, 1,435 rad.min-1
Axial fans designed for free air discharge over long distances. Equipped with inlet cone and safety net on the inlet, outlet cone, feet fixed to the body. Suitable for outdoor use. Weatherproof. • Operating temperatures: ...
Planetfan
Air flow: 165, 2,500, 3,000, 3,500, 4,000 m³/h
Diameter: 160 mm
Noise level: 72, 70, 74, 75 dB
The mobile exhaust fan convinces by the very flexible application due to its low construction and the low weight. In connection to a suction hose, the exhaust fan is appropriate to the application to ...
Air flow: 120.92, 131.67, 81.64, 98.73 m³/h
Diameter: 4.2, 3, 3.6, 2.5 m
Rotational speed: 100, 150, 56, 70 rpm
... Energy-efficient Compared with the US BLDC Fan brand, it saves 45% of electricity. Ultra-Silent Patented winglet design, it reduces the wind noise and provides smooth airflow. Safer SUNON adopts an integrated fan ...
Air flow: 574.07, 398.74, 282.74, 326.73, 381.7 m³/h
Diameter: 6.1, 7.3, 5.5, 5, 4 m
Rotational speed: 65, 115, 60, 50, 909 rpm
... Airflow Different from most large industrial ceiling fans on the market that rely on rapid turning speeds to generate unsteady and uneven airflows, Powerful HVLS Fan series 10 large industrial ceiling ...
Air flow: 0 m³/h - 19 m³/h
Diameter: 1.5 m
Rotational speed: 50 rpm - 120 rpm
Modern HVLS Fan Embrace the Slow-paced Life With the Earth's axis tilted at 23.5°, it created the beautiful sceneries of the 4 seasons. With the 31° curvilinear design of the SUNON Morden HVLS FAN blade, ...
Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB
Dynamic wall mounted extractor fans with motorised hatch, for smoke exhaust in case of fires, 400 °C/2h and 300 °C/2h Dynamic wall extractor fans with motorised opening system and protective grating ...
SODECA
Air flow: 420 m³/h - 42,600 m³/h
Rotational speed: 2,710 rpm - 2,970 rpm
Noise level: 73 dB - 96 dB
... 2G or 2D certified, high pressure centrifugal extractor fans with flameproof Ex db, increased safety Ex eb or dust ignition proof Ex tb motor to work in explosive gas or dust atmospheres. Fan: • ...
SODECA
Air flow: 399 m³/h - 2,856 m³/h
Rotational speed: 1,460 rpm - 3,570 rpm
Noise level: 29 dB - 38 dB
Low noise in-line duct extractor fans mounted inside a 40 mm phonoabsorbent acoustic insulated casing Fan: • Acoustic casing covered with sound absorbing material. • All models equipped with a backward ...
SODECA
Air flow: 0 m³/h - 2,250 m³/h
Rotational speed: 1,400 rpm - 2,900 rpm
... The weight of the portable fan is 30 to 35 kgs. A trolley with 2 wheels is available as an optional extra. Ø200 mm Including 2 x 5m ø165 mm hose, hood with a magnet, thermal protection with a breaker, and a 10m cable ...
Air flow: 208 m³/h
Diameter: 60 mm
Rotational speed: 2,540 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 240 m³/h
Diameter: 60 mm
Rotational speed: 2,350 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 280 m³/h
Diameter: 60 mm
Rotational speed: 2,200 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 8.5 m³/h - 1,000 m³/h
Noise level: 33 dB - 75 dB
... mounting system, for plates from 1 mm to 3.7 mm thick. The installation of FF Series filter fans does not require the use of tools. • The FF Series filter fans connect very quickly using a cage clamp ...
Fandis
Air flow: 38 ft³/min - 560 ft³/min
Designed for outdoor weather where resistance against falling rain, ice formation, and UV degradation is important to ensure operation of apparatus inside enclosure. Maintains a UL Tested NEMA Type 3R seal against enclosure without need ...
External fan units for asynchronous and direct current motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) ...
External fan units for servo motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various ...
Built-in axial fans up to 300 mm diameter -Multifunctional use industrial fan /axial fan -High volume flow -Small number of versions thanks to multi-voltage design 230 ...
Air flow: 0.33, 0.273, 0.221 m³/s
Diameter: 250 mm
Rotational speed: 1,460 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.33 m3/s • Static pressures up to 63 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 0.679, 0.602, 0.523, 0.411 m³/s
Diameter: 350 mm
Rotational speed: 1,360 rpm
Plate Mounted Axial Flow Fan • Standard size 350mm • Air volume flow rates up to 0.679 m3/s • Static pressures up to 95 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 0.294 m³/s - 2.219 m³/s
Diameter: 500 mm
Rotational speed: 1,800, 1,420, 800, 245 rpm
Plate Mounted Axial Flow Fan • Standard size 500mm • Air volume flow rates up to 2.219 m3/s • Static pressures up to 229 Pa • IE5 Highly efficient, EC motors • Fully speed controllable • Suitable for operating temperatures ...
ELTA FANS
Air flow: 7.3 m³/min
Rotational speed: 2,800, 3,250, 3,300, 2,850 rpm
Noise level: 49, 52, 53, 51 dB
The MRE Series long-life axial fans have an expected life of 100,000 hours and are available with a low speed alarm. All MRE Series axial fans include all components for easy installation. • Long-Life ...
ORIENTAL MOTOR
Air flow: 1,529 m³/h - 5,098 m³/h
Noise level: 92, 90 dB
... performance • Safety screens per OSHA; plated steel • Convertible inlet designed to exhaust fumes from bottom of tanks • 115V or 230V (60 Hz), and multiple 50 Hz voltage options • All models supplied with switches ...
COPPUS
Air flow: 87 m³/h
Diameter: 99 mm
Rotational speed: 2,691 rpm
... very low noise level. All the fans are manufactured from injection moulded plastic, fitted with automatic shutter and single phase 230V-50/60Hz, low consumption motor equipped with thermal overload protection. ...
Soler & Palau
Air flow: 195 m³/h
Rotational speed: 2,480 rpm
Noise level: 37 dB
... Product description Standard model •On/off via light switch or separate switch. •Speed controllable. • 1-level small room fan for ventilating the exhaust air rooms. • Suitable for continuous operation. • Standard ...
MAICO Ventilatoren
Air flow: 12 m³/h - 930 m³/h
Rotational speed: 2,500 rpm - 6,850 rpm
Noise level: 27 dB - 73 dB
... mounting •EMC versions are available New Filter Fans The successful LV/GV series has been improved and redeveloped. The main features are the new design, some detail revisions, the IP 55 solution, new fans ...
Rübsamen & Herr Elektrobau GmbH
Air flow: 6,200 m³/h
The axial air stream fan AIR 1 is designed to cool power units and special sections of the vehicle. Its four swivelling, rubber-tired fixed castors provide flexible and uncomplicated steering. PRODUCT DETAILS / SCOPE ...
Diameter: 8'00", 10'00", 14'00", 6'00", 12'00"
... all can be colored a different color! Commercial HVLS Ceiling Fans specs: 6-14 feet diameter HVLS fan Highly durable powder coat finish Electric motors: 120v / Single phase or 230v ...
Air flow: 13,000 m³/h - 15,000 m³/h
Diameter: 230 mm
Rotational speed: 300 rpm
... and 300 revolutions per minute, our ceiling fans ensure quickly and evenly heated areas without long preheating times. Special blades ensure a narrow air cone, thus avoiding flat draughts. Our ceiling fans ...
Diameter: 175 mm
Rotational speed: 2,500, 2,600 rpm
Noise level: 60, 62 dB
• Impeller material: PA plastic + 30% glass fiber • Direction of rotation: clockwise, seen on rotor • Type of protection: IP44 • Insulation class: B • Mode of operation: continuous operation (S1) • Bearing: ...
Blauberg Motoren
Air flow: 24 m³/h - 1,059 m³/h
Diameter: 100 mm - 630 mm
The EOKO 2 circular electric heater is designed for heating rooms or heating supplied air in air-handling systems. All HVAC Components Technical Specifications Type with automatic temperature regulation (type D) IP rating: IP 20 Integrated ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining