230VAC fans

Air flow: 900, 1,900, 2,500, 3,600 m³/h
Rotational speed: 6,000, 5,000 rpm

... High-pressure centrifugal fans, driven by combustion engine. Aluminum sheet riveted impeller, B type blades. Acid-proof sheet impellers prepared on request. Aluminum alloy fan enclosure. Fans designed ...

Air flow: 380 m³/h - 1,900 m³/h
Diameter: 233 mm - 397 mm
Rotational speed: 1,400 rpm - 2,700 rpm

... • Speed controller (Optional) • Speed control (Optional) • Low noise level • Low power consumption • IP44 motor protection rating • Min./Max. Ambient temperature -25/60°C • Galvanised sheet casing • Backward curved ...

Air flow: 1,350 m³/h - 2,900 m³/h
Noise level: 68 dB

... 35 high-performance fan. Through the use of additional fans, the evaporation is accelerated, whereby the drying process can be reduced by up to 50%. Compact, powerful and energy-efficient High motor output High pressure 2 ...

Air flow: 40 m³/h - 120 m³/h
Rotational speed: 3,300 rpm

... Energy efficient AC fans with EC technology Electronic is fully integrated, dimensions are not changed Significant lower power consumption than AC fans Lower noise level Significant higher service ...

Air flow: 0 m³/h - 31,908 m³/h
Diameter: 630 mm - 1,000 mm
Rotational speed: 0 rpm - 1,100 rpm

... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes the blade angle ...

Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1

... Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation of industrial, ...

Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB

... Dynamic wall mounted extractor fans with motorised hatch, for smoke exhaust in case of fires, 400 °C/2h and 300 °C/2h Dynamic wall extractor fans with motorised opening system and protective grating for use without ...

Air flow: 0.679, 0.602, 0.523, 0.411 m³/s
Diameter: 350 mm
Rotational speed: 1,360 rpm

... Plate Mounted Axial Flow Fan • Standard size 350mm • Air volume flow rates up to 0.679 m3/s • Static pressures up to 95 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for operating temperatures ...

Diameter: 8'00", 10'00", 14'00", 6'00", 12'00"

... all can be colored a different color! Commercial HVLS Ceiling Fans specs: 6-14 feet diameter HVLS fan Highly durable powder coat finish Electric motors: 120v / Single phase or 230v / Single ...

Air flow: 78 m³/s - 250 m³/s
Rotational speed: 2,189, 1,672, 2,500, 2,100 rpm
Noise level: 32, 27, 40, 33 dB

... ECA 100 ipro - short description Two-step small room fan, DN 100, standard model ECA 100 ipro - Product description Standard model • On/off with light switch or separate switch. • Operation either at level 1 or 2. • Can be operated ...

Air flow: 13,000 m³/h - 15,000 m³/h
Diameter: 230 mm
Rotational speed: 300 rpm

... and 300 revolutions per minute, our ceiling fans ensure quickly and evenly heated areas without long preheating times. Special blades ensure a narrow air cone, thus avoiding flat draughts. Our ceiling fans are also suitable ...

Diameter: 175 mm
Rotational speed: 2,500, 2,600 rpm
Noise level: 60, 62 dB

... • Impeller material: PA plastic + 30% glass fiber • Direction of rotation: clockwise, seen on rotor • Type of protection: IP44 • Insulation class: B • Mode of operation: continuous operation (S1) • Bearing: ball bearings ...

Air flow: 24 m³/h - 1,059 m³/h
Diameter: 100 mm - 630 mm

... The EOKO 2 circular electric heater is designed for heating rooms or heating supplied air in air-handling systems. All HVAC Components Technical Specifications Type with automatic temperature regulation (type D) IP rating: IP 20 Integrated safety ...

Air flow: 36 m³/h - 822 m³/h
Diameter: 102 mm - 325 mm

... Compatible cut-out sizes with common filter fan manufacturers

Air flow: 6,200 m³/h

... The axial air stream fan AIR 1 is designed to cool power units and special sections of the vehicle. Its four swivelling, rubber-tired fixed castors provide flexible and uncomplicated steering. Easily manoeuvrable with 4 rubber-tyred ...

Air flow: 70, 80, 100 m³/min
Diameter: 450 mm

... there? Fans are available in a number of designs, depending on the application required. The most common are: • Ceiling fan • Table fan • Window fan • Tower fan • ...

Diameter: 2,440 mm - 7,320 mm

... across the fan sweep and is engineered for heavy-duty industrial use.

Key Features

• 4-blade Propell-Aire™ aluminum blades with Vortex Tips (tilt, taper, twist)
• Coverage up to 31,000 sq. ft.; air throw up to

Air flow: 200 m³/h - 600 m³/h
Diameter: 125, 160, 200, 250, 315 mm

... very compact fans (in galvanised steel) for round ducts. They can be installed at any point along a duct. IP 44. They connect directly to standard ducting. Easy assembly and dismantling by means of fixing clamps supplied. Supply voltage ...

Air flow: 2,300 m³/h - 115,000 m³/h
Diameter: 310 mm - 1,600 mm
Rotational speed: 750, 1,500, 1,000 rpm

... . • The temperature of conveyed air: -20°C/+50°C. • Voltage: three-phase version (T) 400V-3Ph. Single phase version (M) 230V-1Ph. • Frequency: 50Hz. • Airflow from the motor to the impeller, position A (FMG). VERSIONS DUCT-Mm: ...

Air flow: 900 m³/h - 4,500 m³/h
Rotational speed: 1,200 rpm - 1,460 rpm
Noise level: 55 dB - 72 dB

... Explosion Proof Certified Axial fans to extract air and fumes directly outside through short ducting, wall or panel mounting. ...