-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Abrasion-resistant hose
Abrasion-resistant hoses

Inner diameter: 25, 31, 38, 50, 75 mm
Outer diameter: 37, 44, 51, 66, 91 mm
Pressure: 50, 16 bar
... layer (R):10^6 Ohm Max. elec. resistance through the hose wall(Ohm/T):10^9 Ohm Surface inner layer:with spiralized electr. conductive strips of smooth, black, non-discoloring and wear-resistant ...

Inner diameter: 6.6 mm - 51.1 mm
Outer diameter: 13 mm - 64.1 mm
Pressure: 40 bar - 225 bar
... Hydraulic Hose meets EN 853 1 SN, SAE 100R1 and ISO 1436 1SNR1 TubeSynthetic rubber, résistant against hydraulic fiuids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) ReinforcementOne braid of high tensile ...
Semperflex

Inner diameter: 0.156 in
Outer diameter: 0.25 in
Temperature: -40 °F - 160 °F
Flexcoil, 5/32" x 10ft with 600-S Blow Gun. 1/4" NPT Fittings, Blue Product Information Description Flexcoil, 5/32" x 10ft with 600-S Blow Gun. 1/4" NPT Fittings, Blue Color Blue Fittings 600-S Blow Gun & 1/4" MPT Swivel Inside Diameter ...
Coilhose Pneumatics

Inner diameter: 38 mm - 76 mm
Outer diameter: 49 mm - 89.5 mm
Pressure: 6 bar
... any other liquid foodstuffs, except fatty and oily products. Very flexible and light. Food grade quality tube that does not propagate bacterial growth. Resistant to abrasion ...
GECITECH SAS

Inner diameter: 7 mm
Outer diameter: 14 mm
Pressure: 21 bar
... , oils, greases, compressed air and water PVC Nitrile blend gives excellent abrasion and ageing resistance - superior to rubber Good flexibility and kink resistant Reduced plasticizer migration ...

Inner diameter: 4.8 mm - 50.8 mm
Outer diameter: 15.5 mm - 68.8 mm
Pressure: 78 bar - 415 bar
TUBE : MINERAL, VEGETABLE AND HYDRAULIC OlL RESISTANT SPECIAL SYNTHETIC RUBBER. REINFORCEMENT : 2 HIGH TENSILE STEEL WIRE BRAID. COVER : OlL, ABRASION AND WEATHER RESISTANT ...
TURALI HOLDING

Inner diameter: 90 mm - 1,240 mm
Pressure: 0.001 bar - 0.548 bar
Temperature: -20 °C - 70 °C
Features : • Good resistance to mechanical damage • Robust • Highly flexible, compressibility 1:8 • External galvanised steel helix protects against abrashion • Extremely connect production system • Stronger than TechniConnect 01 Using ...
TECHNIFLEX HOSE INDUSTRY

Inner diameter: 50 mm - 300 mm
Temperature: -40 °C - 90 °C
... and chips. Technical Features Structure: Polyurethane flexible hose with copper-plated steel spiral wire reinforcement. Thickness 0,5 mm; very light and particularly flexible ...

Inner diameter: 2 in - 4 in
Temperature: -65 °F - 200 °F
Delivered length: 25'00", 50'00"
... fume control applications.Good chemical resistance. Light weight for easy handling. Clear wall for product flow monitoring. Abrasion resistance for light duty material handling Applications Fume control Light duty material ...
Novaflex

Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar
Advantages/ Technical Specs Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional ...

Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm
... depends on the diameter and ranges from 100 mm to 300 mm.\ PTFE Tube Key properties Excellent chemical resistance Working temperature from -180°C to +260°C FDA approved Flame resistant - UL94V0 No ...

Inner diameter: 51 mm - 152 mm
Outer diameter: 67 mm - 171 mm
Temperature: -30 °C - 70 °C
The inner tube is made up of based rubber mixture NR/Br and it is smooth, anti static and has an excellent resistance against abrasion. Reinforcement:synthetic textile spiral;embedded in the wall. ...

Inner diameter: 38 mm - 125 mm
Outer diameter: 52 mm - 156 mm
Pressure: 4, 5, 6, 7 bar
The Jumboflex J 2-5 PVC Grit Hose is a suction and discharge hose constructed in soft-compound abrasion PVC with rubber and hard PVC spiral. This sturdy hose can resist ...

Inner diameter: 6.3 mm - 10 mm
Outer diameter: 12 mm - 17 mm
Pressure: 20 bar
Rubber hose for ACETYLENE with substrate in SBR / NR, black smooth. Red abrasion-resistant cover. Marking 559- NF EN ISO 3821 – ACETYLENE – DN – 2 MPa (20 bar) – year of production. ...
MASTERTUBI spa

Inner diameter: 16 mm - 500 mm
Outer diameter: 17 mm - 501.7 mm
Pressure: 0.04 bar - 1.8 bar
Structure : Flexible ducting made out of polyester polyurethane reinforced wall with copper-coated spring steel wire for grounding. PU FEU: fire resistant PU according DIN4102 B1. Halogen- and softener-free. Applications ...
Gap Plastomere

Outer diameter: 52 mm - 203 mm
Pressure: 0.08 bar - 0.4 bar
Temperature: -40 °C - 100 °C
... maintenance of green areas Properties: Resistant to hydrolysis and microbes, food grade wall acc. to EG regulation no. 1935/2004 and no. 10/2011, FDA standard 21 CFR 177.2600 and 178.2010, good abrasion ...
SCHAUENBURG Ruhrkunststoff GmbH

Inner diameter: 19.5 mm - 51.1 mm
Outer diameter: 32.3 mm - 71.1 mm
Pressure: 345 bar
... MISSION • INCREASED SAFETY • ENVIRONMENTAL PROTECTION • PRODUCT RESPONSABILITY • ENERGY CONSUMPTION REDUCTION • LEAKAGE-FREE HOSE ASSEMBLIES • OIL-LESS ASSEMBLIES • FULL SYSTEM CONTROL IN CASE OF HIGH PRESSURES, VIBRATIONS ...

Inner diameter: 8 mm - 16 mm
Outer diameter: 15 mm - 23.7 mm
Pressure: 130 bar - 210 bar
... pressure water hose for various fields of application, i.e. in wash bays, working rooms, production halls or swimming pools/baths. Core and surface are made from synthetic rubber with a wire insert. High temperature resistant ...
Teha

Inner diameter: 2 mm - 18 mm
Outer diameter: 4 mm - 20 mm
Temperature: -20 °C - 150 °C
PVDF tubing can be delivered in smooth or convoluted version (spiral or parallel). In metric, inch and AWG sizes. Delivery possible on straight lengths, cut lengths, coils or spools. Key properties of PVDF • Excellent resistance against ...

Inner diameter: 30 mm - 550 mm
Outer diameter: 38 mm - 560 mm
Pressure: 0.1 bar - 2.52 bar
... polyurethane hoses are ideal for resistance to abrasion and exhibit better properties than polyether plyurethane. They feature spring steel wiring and a tough hose wall. They are best ...
UNVEREN Co.Inc.

Inner diameter: 6.3 mm - 25 mm
Outer diameter: 13 mm - 34.5 mm
Pressure: 20 bar - 28 bar
... degrees Celsius. Its internal tube has been manufactured out of specialized NBR rubber materials tolerant to hydraulic oils, while its external housing has been made out of synthetic rubber retardant to weather, abrasion, ...
Dicsa

Inner diameter: 6.35 mm - 25 mm
Outer diameter: 11.5 mm - 33 mm
Pressure: 30 bar - 60 bar
... Benefits Silicone & cadmium free Plasticiser free Hydrolysis resistant Halogen free Good corrosion & abrasion resistance Highly elastic Lightweight Flexible ...
Colex International Limited

... steel brake hoses) are flexible hoses fitted to a hydraulic brake system.The intent of braided stainless steel brake lines is to improve brake system effectiveness and longevity as compared ...

Due to the manufacturing process of these Moldflon™ Thermoplastic materials, extruded tubes made from Moldflon™ offer significant advantages over PTFE-tubes. Essential Advantages: Customized shape Large scale production Short ...

Inner diameter: 19.5 mm - 31.8 mm
Outer diameter: 24 mm - 39.3 mm
Pressure: 45 bar - 60 bar
... - Design: 3/4” - 1 1/4” Patented manufacture of Smoothbore, convoluted PTFE hose construction - Inner layer construction: FDA approved Virgin or Anti-static PTFE tube - Outer Layer construction: 3/4” ...
Kongsberg Automotive
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining