Flow: 0 l/h - 5.4 l/h
Pressure: 2 bar
Fluid temperature: 0 °C - 60 °C
... SiC enable the handling of abrasive liquids as well as liquids including solid substances. A constant flow of high viscous liquids up to 20.000 mPas is possible. Compact construction These lightweight and compact ...
Flow: 0 us gal/min - 15 us gal/min
Pressure: 8.6 bar
Head: 86 m
... versatility and power in a compact design. The S05 is equipped to handle abrasive fluids and small suspended solids with ease and dependability. The durable bolted construction of ...
WARREN RUPP
Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 16 bar
... as unloading, stripping, circulating, transfer, blending or export pump for fluids with poor and good lubricity, clean or slightly abrasive/corrosive fluids, low and highly viscous fluids, ...
Leistritz Pumpen GmbH
Flow: 33 l/h - 2,700 l/h
Pressure: 0 bar - 10 bar
The PSF1, manufactured by Ragazzini, produces flow rates of 33 up to 2700 L/h and pressures of 8 up to 15 bar. Furthermore, it has a hose diameter of 26 mm.
RAGAZZINI
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
... joint. This competitively priced pump is reliable and efficient when handling abrasive materials, high viscosity fluids, and high head applications. Features Available in cast iron or stainless steel, ...
... platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high viscosity to paste, high filling and high ...
Pressure: 0 bar - 3,800 bar
... KMT Waterjet Ultra High Pressure pump series 3800 bar STREAMLINE SL-VI STD KMT Waterjet Ultra High-Pressure entry-level pump 3800 bar For application which do not require a maximum pressure of 4,137 bar, KMT WATERJET ...
Water Jet Sweden AB
Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm
... a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 mm). Flow rate proportional to number of ...
Caffini Cipriano s.r.l.
Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW
... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump is the ideal choice ...
PCM
Flow: 0 m³/h - 475 m³/h
Pressure: 6 bar
Power: 0.55 kW - 30 kW
... many other pumps have problems with clogging. Thoughtfully designed dry-installed Chopper Pump for industry Due to the design of the pump with an open impeller, the MPTK-I pump can ...
LANDIA AS
Flow: 0 m³/h - 63 m³/h
Head: 22.5 m
Power: 11, 15 kW
... semi-submersible electric pump unit, with a single stage centrifugal pump, axial fluid admission and supports out of the pumped fluid. The pump as part of the electrical ...
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
... ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering on air consumption), ...
Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW
... 3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in a multitude of industrial applications, ...
Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW
... MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘F’ (155ºC), rated IP68. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. ...
Mody Pumps (Europe)
Flow: 0 l/s - 5.2 l/s
Power: 0.75 kW
... The Mini pump excels in applications where reliability and easy handling are essential. It is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 5 mm. Pump ...
... The peristaltic pump is the new soft and delicate system for transferring more or less thick fluids. The pump is suitable for working with fluids (wine, fruit juice, milk, oil), semi-solid ...
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
... diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...
Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m
... The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small footprint ...
Shijiazhuang Sunbo Pump Co., Ltd
Flow: 95 m³/h
Head: 95 m
Power: 46 kW
... unique Selprime automatic air pump priming. The H80/H125 have an oil immersed mechanical seal with the other models using a two ring vacuum gland providing extended dry running. The 'H' range features abrasive ...
Selwood
Flow: 0 l/min - 4,656 l/min
Pressure: 0 Pa - 2,000,000 Pa
... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...
Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W
... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump Pump ...
Flow: 0.6 m³/h - 15 m³/h
Head: 3.6 m - 22.4 m
Power: 0.15 kW - 1.1 kW
... Close-coupled centrifugal pumps with open impeller. Free-flow impeller (vortex or recessed impeller) for type C 16/1E. C: version with pump casing and lanter bracket in cast iron. B-C: version with pump ...
Flow: 800 us gal/min - 11,000 us gal/min
Head: 102'00" ft - 665'00"
... handling, the JSC compressor-assisted pump series leads the industry in sewer bypass, emergency response and any high head/high-volume applications. Heavy duty, dry-priming with auto-start and compact design options, ...
Thompson Pump
Flow: 0 l/min - 830 l/min
Pressure: 0 bar - 80 bar
... Three-Screw pump for non lubricating fluids Pumped Liquid Non- or mal-lubricating, slightly abrasive, corrosive Main Fields Of Application Process engineering, power engineering, ...
ALLWEILER GmbH
the best suppliers