Adapters

The CA 6651 test adapter for electric vehicle charging stations is simple to use. It can be interfaced in series on the output of a charging station and allows you to access the various measurement points on a type-2 ...

The C.A 753 measurement adapter can be used for measurements in total safety on European 2P+E and Schuko sockets. Its design guarantees mechanical and electrical contact with all test probes (Ø 2 mm, Ø 4 mm, IP2x, etc.). The ...

... oscilloscope measurement inputs. Chauvin Arnoux and Metrix propose a wide range of BNC accessories. BNC/banana adapters 50 Ohm load adapters Extensions, tee-joints

Diameter: 22, 28, 18.5 mm
Length: 185, 235 mm

For ScrewFit front pieces With preset vibration damping

... material damage to a desk or an object if a collision occurs during driving of the desk. The DS1 is a small, compact plug-in adapter based on gyroscope technology, and it detects even a slight tilting of the desk ...

... to + 85°C) • suitable for LED adapters with 50 mm Ø • exchangeable sockets for popular high-power LEDs und Level 2 boards • 10 W maximum LED thermal dissipation • 2 A maximum drive current LED-850 TEC test adapters ...

This adapter unit connects to the Main Body T-A20 which enables Multi-point measurements through a LAN (10 Base-T) category 5 straight cable that connects to the Adapter Unit for receptor head T-A21.

Adapter Unit for Receptor Head T-A21 connects to the adapter unit for Main Body T-A20 which enables Multi-point measurements or cable extension for measurements.

Diameter: 16, 20, 12, 15, 10 mm
Length: 48 mm - 76 mm

Hose adapters GN 480.7 can attach e.g. air nozzles or coolant nozzles and their feed pipes with mountings clamps and hold them in position. The d2 / d3 thread and barbed fitting diameters are compatible with the most ...

Diameter: 0.13 in - 2 in

Gas - NPT adapters These adapters allow using NPT threaded fittings on vacuum components with NPT threading, such as vacuum components like vacuum cup supports, valves and solenoid valves, filters ...

Diameter: 0.25, 0.38, 12, 10, 8 in
Length: 14 mm - 48 mm

Adapters These standard accessories offer the user different assembly options. The galvanised steel or brass adapters screwed onto the standard vacuum cup support connections can vary the threads ...

RLACC connector adapter is a tool for connecting any readhead from RoLin product family to an E201 communication interface or similar subsequent electronics. It enables easy connection between RoLin’s 10 or 6 pin flex ...

SATI stands for Stand Alone Trimming Interface. It enables zeroing and trimming of the encoder after it has already been installed. Successful trimming process done with SATI improves the system’s absolute position error down to ±0.2°. ...

The E201 is a single channel USB encoder interface suitable for use with a wide variety of 5 V rotary and linear encoders. It allows encoders to be easily interfaced and powered from a PC using only a USB cable. Features The E201 ...

... like Snap Signal Wiring adapters reroute wiring to match specific application requirements with dual M12 connections Robust, over-molded design meets IP65, IP67, and IP68 ratings for dependable performance Custom S15A ...

Diameter: 4.85 mm
Length: 0.2 m

Y adapter for connecting PSEN ml b or PSEN ml s to PDP67 PN 6FDI 6FDIO 2FDOTP, 1 x 8-pin M12 female connector, straight, A-coded on 2 x 5-pin M12 male connector, straight, A-coded Typ. conductor resistance K1 - Typ. ...

Product code/s 11708351 DIN RAIL Mounting Adaptor Din EN50022 reil mounting for 46 mm standardized grey enclosures Features SeriesAUXILIARY CONTROLS, Auxiliary Controls, LIFT TECHNOLOGY, Orion Black, Orion Grey, PegasusAutomation ...

The WLAN Adapter and App for process refractometers allow you to work without an extra display and cabling. Your smartphone is all you need. With the App you can read the measurements in RI, BRIX, or in your customized ...

The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. ...

... tapped via the EV test instrument. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EV test instrument has a shock-proof plug connection. The EV test instrument can ...

The CPL1 and CPL2 external quadripoles are designed to connect the MPD 800 partial discharge measurement device to a capacitance (coupling capacitor or test object), which generates a reactive current larger than the current that can ...

The LUMIMAX® Mounting Systems allow the direct mounting of the LED light to the camera serie SIMATIC MV440 and MV5x. The mounting variations can be individually adapted and expanded flexibly, so that exact matching of the lighting angle ...

... a single, compact unit. Especially for standard-compliant reading and verification of codes we also offer verification adapter for Dome andCoaxial Lights and Bar Lights in a four-sided mounting bracket. Protection class: IP64

COIL Adapter XTRA for Inter-Turn Short Circuit Test Adapter for inter-turn short circuit detection at inductances ranging from 10 µH to 5 H The coil adapter XTRA permits semi-automatic ...

Test adapter for electric charging stations (single-phase, type 1) for PROFITEST Single-phase test adapter with type 1 plug for testing the effectiveness of protective measures at electric charging ...

Single and 3-phase test adapter with type 2 plug for testing the effectiveness of protective measures at electric charging points with the Profitest Master. Simulation of fictitiously connected electric vehicles and simulation ...

UNI lock 5-axis reducer adapter system size 138 mm Material: Steel. Version: Main body oxidised. Contact faces case-hardened and ground. Note: The UNI lock 5-axis reducer adapters are used to convert ...

•Flexible optical/electrical hybrid designs •Easy to terminate •Easy to clean ELIO® AQ adaptors enable the use of ELIO® fiber optic contact technology in all standard ARINC 600 and 38999 sIII connectors with insert cavities size ...

The A 1722 PRCD Adapter is a multi-function test adapter intended for safety and functional testing of different types of 1-phase and 3-phase PRCDs. KEY FEATURES • Simulation of errors on input mains • ...

The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. KEY FEATURES • Banana socket outputs for connection to a ...

The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. KEY FEATURES • Banana socket outputs for connection to a 3-phase system • Motor driven through ...

... indicator with firmware version 1.0.9 or later* * The PTA adapter cannot be configured using older indicator versions. The PTA adapter can be used with older indicator versions, however, the adapter ...

Communication Adapters RSU100, MRS100A RS-232 to USB Mitutoyo to RS-232

► Spe­cial fea­tures With choice of fe­male or male threads Avail­able with in­te­grated vac­uum gen­er­a­tor

► Spe­cial fea­tures Very strong ma­te­r­ial com­bi­na­tion Mount­ing jointed on all sides for suc­tion grip­pers and suc­tion plates

... permissible misalignment of 2°, then a side load adapter must be provided. This increases the permissible angle of impact to 30°, which is especially advantageous for rotative applications. The side load adapter ...

Insulating adaptor Application : Insulating adaptor, with 1/4 hexagonal male fitting and 3/8 drive square. For use with screwing standard hand machine. Features : Operating voltage up to 1000 V AC - 1500 V DC. In ...