Air blowers

Flow: 5 l/min - 298 l/min
Operating pressure: 5,300 Pa
Nominal power: 36 W

... Maximum continuous operation state - Unit - Data Rated current - A - 1.5 No-load speed - rpm - 37000 Rotation speed at maximum wind pressure - rpm - 42000 Maximum flow (wind pressure = 0) - L/min - 298 Speed at maximum flow - rpm - 37500 ...

Flow: 500 m³/h
Nominal power: 210 W
Sound level: 76 dB

... AURORA’s Radial Blowers are built with powerful electric motors for high efficiency throughout a long lifetime of performance. These blowers feature a high proportion of air flow vs. ...

Flow: 5,400 m³/h
Nominal power: 700 W
Weight: 11.8 kg

... VELOCITY 700W CENTRIFUGAL AIR MOVER WITH TIMER, WHEELS FOR COMMERCIAL & RESIDENTIAL DRYING, AIR CIRCULATION & WATER DAMAGE RESTORATION Powerful High-Velocity Airflow： Delivers up to 5400 m³/h airflow at 1350 RPM, ...

Nominal power: 0.15, 0.22 kVA

... HAUG’s Ion- Air blower IB is based on the concept of a proven ionization technique. Negative and positive ions are added to the air flow produced by a cross-flow blower. The air ...

Flow: 120 m³/h - 522,000 m³/h
Operating pressure: -360 mbar - 480 mbar
Nominal power: 0.55 kW - 2.55 kW

... turbine to make sure the stability. Air gets in through inlet 1, then enters side channel 2, impeller will push the air under high speed. Meanwhile, centrifugalization makes the air speed outward and ...

Flow: 10 l/min - 100 l/min
Operating pressure: 0 Pa - 4,500 Pa
Nominal power: 0 W - 29 W

... Scope This specification applies to Blower Kit:TF037C-2100-P (hereinafter referred to as "the PRODUCT"), a product of NIDEC COPAL ELECTRONICS CORP. (hereinafter referred to as "NCEL"). Contents of the kit are Micro Blower:TF037C-2100-F, ...

Flow: 37 m³/h - 183 m³/h
Operating pressure: 0.5 bar - 5 bar

Flow: 0 m³/h - 800 m³/h
Nominal power: 200 W

... The ECOBLOWER 351-C ionised air blower is designed to neutralize electrostatic charges on the surface of materials.. The three antistatic bars integrated in the unit generate a powerful and effective ion release. Thanks ...

Flow: 40 m³/h - 2,640 m³/h
Nominal power: 0.2 kW - 20 kW

... components. Therefore the blowers don’t need any lubrication or maintenance. The air conveyed by these devices is not contaminated, the operation is noiseless and continuous, wearless and without any fluid pulsation. Our ...

Flow: 0 m³/h - 7.2 m³/h
Operating pressure: 0.4, 0.6 bar
Nominal power: 0.35 kW

... DT 4 Air Blower for 1 Hot Air Welding Torch 0.4 bar, up to 60 l/min 0.35 kW AC motor, 230 V 1 socket Low operation noise Weight: 10.8 kg DT 6 / DT 6L Air Blower ...

Flow: 160 m³/h - 1,550 m³/h
Operating pressure: 20 mbar - 1,550 mbar
Nominal power: 0.25 kW - 15 kW

... Side Channel Blower - Single Stage Direct coupled engine Aliminum injection cast housing and fan Capacity: 160 - 1550 m3/h Operating Temperature -15 to +40°C Monophase option for 0.25 – 3 kW range Pressure applications: +250 ...

Flow: 58 m³/min - 94 m³/min
Operating pressure: 63,700 Pa - 98,000 Pa
Nominal power: 90 kW - 200 kW

... DSR250G Roots Blowers are tri-lobe double oil tanks roots blowers, adopt the advanced technology of Japan, its air capacity is 58.0m³/min - 93.7m³/min, the pressure is from 63.7Kpa to 98Kpa. The main ...

Flow: 0.96 m³/min
Operating pressure: 217.118 Pa
Nominal power: 11.5 W

... - 125mm square x 32mm frame sizes - Thermal protection type - UL/cUL/TUV/cTUVus agency listed - Weight 340g - RoHs Compliance - Operating Temperature -10℃~70℃ ...

Flow: 530 m³/h
Operating pressure: 430 mbar
Nominal power: 7,500 W

... High-Pressure Ring Blower Operating Principle: The impellers in the air blower are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, ...

Operating pressure: 80 mbar - 435 mbar
Nominal power: 0.2 kW - 22 kW

... Dutair blowers are used worldwide for their highly reliable operation in the usual fixed frequencies of 50 and 60 Hz. The technical specifications comprise a range from 30 to 80 Hz in 10 Hz steps which makes Dutair blowers ...

Flow: 613 m³/h - 64,825 m³/h
Nominal power: 0.12 kW - 11 kW

... Specification:2.5#~11.2# Power:0.12~11KW Flow rate:613~64825m³/h ...

... and supplies multi-stage high pressure fans (or blowers). These are used in the mineral processing and chemical industries where there is a need to supply relatively small flows at high pressure. Our blowers incorporate ...

Flow: 760 ft³/min
Operating pressure: 160 mbar
Nominal power: 3.7 kW - 7.5 kW

... an aerodynamically designed blower. Direct Drive enhances reliability and boost performance by eliminating belts, tensioning devices and complex spindle assemblies common in other high-speed blowers. The JET-1™’s aerodynamic ...

... product highlights 20% more efficient horse power. A Paxton XT 500 blower is an example of a blower that has 20% more flor (CFM) at a same pressure compared to a regular 5 Hp centrifugal blower. ...

Flow: 40 m³/h - 60 m³/h
Operating pressure: 0 Pa - 8,000 Pa
Nominal power: 0.2 kW - 0.28 kW

... channel causing that the air is compressed and accelerated, creating small vortexes of air that are drawn by the blades from the intake to the exhaust. There are no parts in contact between the stator and rotor; this ...

Flow: 0 m³/h - 25,000 m³/h
Operating pressure: 0 Pa - 100,000 Pa

... can form. An explosive atmosphere is determined as the mixture of air with a fuel in the form of gas, vapour, clouds or dust, in such a proportion that excessive temperature, electric parts, sparks or another source ...

Flow: 3,395, 1,600 m³/h
Operating pressure: 1,300, 1,500 Pa
Nominal power: 1.5, 0.75 kW

... Portable centrifugal blower is designed for suction and extraction of fumes, gases, dirty air and light dust. DF/S blowers are great when fast, simple and temporary blower is needed. ...

Flow: 120 m³/h - 1,200 m³/h
Operating pressure: 0.034 Pa - 0.27 Pa
Nominal power: 2.2 kW - 37 kW

... temperature (400 F) • - Thermocouple for PLC monitoring • - Wash down. explosion proof. chemïcal duty motors • - Hydraulic, pneumatic motors & PTO • - Welded flange inlet and outlet • - Hard anodize & spécial matenals ...

Flow: 170 m³/h - 200 m³/h
Operating pressure: -730 mbar - 1,040 mbar
Nominal power: 7.5 kW - 8.6 kW

... General features: ●Max Air flow to 2480m3/h; ●Rated vacuum to -730mbar; ●Rated pressure to 1040mbar; ●IE2/IE3 high efficiency is available; ●With Thermal protection (PTC); ●100% Oil free, Easy installation, Maintance free; ...

... ANTISTATIC FANS VAG 800 TYPE It is suitable to clean and neutralize electrostatic changes with a longer radius. ...