Analog I/O

G series Distributed IO for smart solutions and CODESYS control The G series distributed IOs provide you with supreme field and bus connectivity for smart integrated solutions through a wide range of IO modules for almost any signal ...

Performance and practicality for machine control Modern machine control requires system-wide synchronisation of motion axes with microsecond accuracy. The NX I/O system offers this timing accuracy and repeatability for a wide variety ...

GW1-ETH-WQ-EU is an Ethernet gateway that converts Ethernet into wireless in the Sub-1GHz band. Data from the wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or received data from computers can be sent via Ethernet.With ...

New Remote I/O modules with Hight-functional Firmware Configurable Type in the CONPROSYS M2M series Easily connect modules using the stack method. Users are able to combine I/O modules freely and connect them to the CPU module in ...

The product is really a multiple-functionality user interface table from the PCI Convey shuttle conformity that maintained electronic output and input (LVTTL degree, for every 4 factors) and countertop (32bit, 1ch) in addition to analogue ...

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors and actors.

The CP-RIO3-04S is a 4HP Rear Transition Module for usage with the CP3004, CP3005, and the CP3010 3U CompactPCI CPU board. The Module provides access to the I/Os from the back of the system. REAR I/O MODULE FOR KONTRON 3U COMPACTPCI ...

The world’s smallest AS-Interface module with IP68/IP69K protection needs no more than 8 cm³ for each I/O. The one-piece enclosure mounts quickly and securely using a single stainless steel screw. Just 20 mm high, it easily fits in cable ...

The KE modules series offers a maximum of 4 inputs and 4 outputs on a device only 22.5 mm wide, saving space on the DIN mounting rail in the control cabinet. Colored removable terminals and labeling make connection safe and easy.

4 configurable analogue inputs Modbus-RTU module - DIN rail mount - Powerful embedded processing capabilities including Loop-back (input simulation) and alarms Process inputs: 4 T/C or RTD Inputs - Thermocouples: J, ...

8 current/voltage analogue inputs CANopen or Modbus-RTU module Collegabile in rete Modbus installabile su guida DIN DIN rail mount - 16 Bit input resolution - 800V insulation between inputs - High level inputs - Powerful embedded ...

8 thermocouple inputs CANopen or Modbus-RTU module - DIN rail mount - 16 Bit input resolution - 800V insulation between inputs - Powerful embedded processing capabilities including Loop-back (input simulation) and alarms Process ...

Rockwell Automation announced as of June 2018, the 1753 GuardPLC Safety I/O will be discontinued. Some of these products are no longer available for sale. Customers are encouraged to make last-time buy orders for any of the products that ...

Very safe mounting and high protection rating Digital inputs and outputs Fast detection and processing of analogue inputs Toolless mounting Three freely selectable directions of the flat cable

2 times 2 digital inputs for switching status and 2 outputs supplied from AS-i Four digital inputs for switching status and four inputs for function check Four analogue inputs, four analogue outputs or 4 Pt100 channels selectable ...

High vibration resistance due to full potting Sensor and actuator supply also possible with external voltage Reliable detection and display of peripheral and communication faults Addressing via infrared interface ...

CAN FD Under Control The QuantumX MX471C CAN FD bus module allows you to easily analyse signals on up to 4 CAN FD or CAN networks in a time sync’d way, decoding in real-time or on PC level. It also serves as a Gateway from any connected ...

High performance and multiple functions - these are strengths offered by the MX878B module which seamlessly integrates with the universal and distributable QuantumX series. The module is ideally suited for durability testing of system ...

QuantumX MX879B multi-I/O module: real-time response to measurement results The multi I/O module with an active response option to measurement results Do you want to precisely acquire and actively respond to measurement data - in ...

EP5101 | Incremental encoder interface with differential inputs The EP5101 EtherCAT Box is an interface for the direct connection of incremental encoders with differential inputs (RS485). A 32/16 bit counter with a quadrature decoder ...

Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...

Analogue input modules of the u-remote system are available in many variants with different resolutions and wiring solutions. Variants are available with 12- and 16-bit resolution, which record up to 4 analogue sensors with +/-10 V, ...

Safety in the system does not begin with the drives first, but at the control level. With the expansion of the controller software to include the Safety Controller c250-S a complete automation solution is provided for safety engineering ...

SENSOR/ACTUATOR BOXES Sensor/actuator boxes, which are installed directly on machines or systems, are passive distribution systems for signal transmission that is rapid, cost-effective and, above all, cabinet-free. Thanks to the fully ...

Our modular fieldbus and remote I/O-systems offer a comprehensive range of solutions for factory and process automation with interfaces for the fieldbus protocols PROFIBUS-DP, DeviceNet™, CANopen, Modbus TCP, Ethernet/IP™ and PROFINET. ...

For factory automation we offer compact fieldbus I/O-modules for PROFIBUS-DP, DeviceNet™, CANopen, INTERBUS, AS-interface®, Modbus TCP, Ethernet/IP™ and PROFINET. The IP67-modules for use in harsh environments have glass-fiber reinforced ...

In combination with our existing PLC and HMI PLC products, the XN300 I/O system provides an ideal system solution for machine building applications meant for mass production environments. Our CODESYS programming software and Galileo visualization ...

The Modular XI/ON, composed of block, slice, and gateway, guarantees intelligent and communicative terminals. The block and slice design is compact, and modularity is guaranteed, with user needs met by a correct number of channels. Fast, ...

The SmarWire-DT connection is well known for its flexibility. This highly remarkable connection technology permits installation at any location in the control panel. One of the best features of this great technology is situating the input/output ...

3 Pt100 temperature inputs in the same casing “Application-specific” example : temperature regulation and measurement Extension compatible with any Millenium 3 Smart expandable logic controller

- 12 analog input channels (12-bit, 1000 sample/second per channel) - Supports various input types: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~20 mA - Each input channel can be configured with different input types and range - ...

- Channels: 4, differential - Input Type: Voltage, Current - Resolution: 16-bit - Voltage/Current: ±10V, ±2.5V, 0 ~ 20mA, Range 4 ~ 20mA - Sampling rate: 10 sample/second (total) - Input Impedance: 0.1 MΩ - ...

- Channels 4 - Output Type Voltage, Current - Resolution 12-bit - Isolation Voltage 2000 VDC

The versatile and efficient S100 I/O from Advant consists of one or more I/O racks and has several I/O boards, connection units and cables, and can be used for a wide range of applications and specific customer needs. There are various ...

Ovation™ I/O Comprehensive suite of I/O modules to support long-term process reliability and expandability Ovation™ I/O Overview Features ▪ Modular, plug-in components support long-term process reliability ▪ Modules are installed ...

RX3i Analog Input module, current/voltage, 16/8 channel RX3i IO is designed for mission critical discrete and process applications. The rack-based IO offers advanced diagnostics and outstanding flexibility, with a wide range of standard ...

VersaPoint I/O The VersaPoint ™ Distributed I/O System provides the best in compact flexibility, while allowing users to install just the right amount of I/O needed for each application. Thanks to its adherence to open communications ...

Product Description The safety-related F3 AIO 8/4 01 remote I/O is a compact system located in a metal enclosure with 8 analog inputs and 4 analog outputs. The remote I/O is available in three model variants for SILworX and three model ...

Z-SG2 Strain gauge input module with advanced features Z-SG2 is a load cell converter (strain gauge). The measurement carried out with the 4 or 6-wire technique, is available via ModBUS RTU serial protocol or via the analog output. ...

Z-4DI-2AI-2DO 4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output, Modbus RTU Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module ...

ZE-4DI-2AI-2DO 4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output Modbus RTU-Modbus TCP-IP ZE-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus TCP-IP communication (Ethernet) ...

The Standard-Bus End Terminal is required to enable data exchange between the Bus Coupler and the Bus Terminals. Each Bus Terminal block must be terminated at the right-hand end using this terminal. The Standard-Bus End Terminal does ...

2-Channel Thermocouple Input This analog input device allows for direct connection of two thermocouples. The Bus Terminal’s circuitry can operate thermocouple sensors using the 2-wire technique. The temperature range is selectable, and ...

4-Channel Thermocouple Input This analog input device allows for direct connection of four thermocouples. The Bus Terminal’s circuitry can operate thermocouple sensors using the 2-wire technique. The temperature range is selectable, ...

Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used anywhere where ...