- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Analog level sensor
Analog level sensors
Level range: 0 m - 211 m
Process pressure: 0 psi - 300 psi
Process temperature: -25 °C - 60 °C
... The Model SDT Submersible Hydrostatic Level Transducer indicates the level of liquid by continuously measuring hydrostatic pressure via its isolated sensing element. Once the sensor measures the pressure, ...
Level range: 0 m - 300 m
... IoT Router and Cloud Platform - ThingsMaster Support Modbus to connect optional NBIoT Gateway WR222 for one or many sensors Real-time online monitoring, analysis, reporting Remote cloud security and visual management ...
Level range: 330 mm - 6,000 mm
Process pressure: 3 bar
Process temperature: -40 °C - 80 °C
... ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART® communications are offered with a PACTware™ PC program for remote configuration and troubleshooting. The level measurement ...
Level range: 200 mm - 3,000 mm
Process temperature: 0 °C - 70 °C
... container •Capacitive level detection of the medium •Illumination of the tank up to 3000 mm deep • Sensor material selectable according to medium •Clearly visible LED Display APPLICATION: PLANTS & MACHINES | FOOD ...
CAPTRON
... Description One switchingpoint and one analog value •Switching point NO / NC programable •Output of the analog value as current or voltage • Analog value with cable breakdown protection •Measured ...
CAPTRON
... Description Three switching points and one analog value •Three switching points NO / NC programable •Output of the analog value as current or voltage • Analog value with cable breakdown protection •Measured ...
CAPTRON
Level range: 0 m - 20 m
Process temperature: -25 °C - 70 °C
... Submersible probe with integrated 4-20 mA transmitter for hydrostatic level measurement in water and waste water. With capacitive ceramic measuring cell without oil filling and independent measurement range setting via HART interface. This ...
Level range: 1 m - 10 m
Process temperature: -25 °C - 70 °C
... probe with integrated 4-20 mA transmitter for hydrostatic level measurement in water and waste water. With capacitive ceramic measuring cell without oil filling. This hydrostatic level probe is developed ...
Level range: 30 m
Process temperature: -40 °C - 80 °C
... Electro-Mechanical Level Measuring System consists of plumb, cable wire, measuring pulley, position sensor, and contrd board to measure the material level. It senses the weight status and count the cable ...
Process temperature: -20 °C - 60 °C
... Continuous level indicator certificate N° Tuv 12 Atex 109610 Electromagnetic Level indicators with a continuous signal 4-20mA Accuracy 12 mm USE: The level indicators CRXI are build ...
Process pressure: max 69.0 bar
Process temperature: -40 °C - 125 °C
... Tank level indicator, Tank level sensor, Float level switch, Fluid level sensor, Level controller, Level gauge, Level ...
Level range: 50'00"
... the sensor and offers you greater options for insertion. All units are Intrinsically Safe and approved for use in hazardous locations. Product Type Liquid level sensor, leak detect sensor, ...
Process pressure: 1,000 psi
... are available to fit virtually any application. Product Type Linear position sensor, Position sensor, Liquid level sensor, Magnostrictive probe, Level sensor, ...
Level range: 30 mm - 8,000 mm
... and plug connector. The sensors are available in five detection ranges and cover a measuring range of 30 mm up to 8 m. Two output levels are available for all five detection ranges: - 1 pnp switching output Sensors ...
microsonic
Level range: 250 mm - 1,300 mm
Process temperature: -25 °C - 70 °C
... ultrasonic transformer from the sensor housing. The M22 sensors detect in a contactless fashion and are reliable within a measuring range of 20 mm to 1,300 mm. The ultrasonic sensor is the best ...
microsonic
Level range: 30 mm - 8,000 mm
Process pressure: 6 bar
Process temperature: -25 °C - 70 °C
... operating voltage LinkControl for configuration of sensors from a PC Description For fill level measurements of aggressive media and in overpressure the ultrasonic transducers of the new hps+ sensors ...
microsonic
Level range: 200 mm - 6,000 mm
Process pressure: -1 bar - 120 bar
Process temperature: -65 °C - 450 °C
... The TORRIX bypass is the ideal sensor for level measurement in tanks with magnetic level indicators. The TORRIX is mounted on the outside of the bypass, and picks up the magnetic field and delivers the ...
FAFNIR GmbH
Level range: 400 mm - 22,000 mm
Process pressure: -1 bar - 120 bar
Process temperature: -20 °C - 450 °C
... measurement values at a time along with graphical representation of the filling level continuously. Main Features & Benefits 3 in 1 measurement: Product level, interphase and temperature Integrated LCD Display ...
FAFNIR GmbH
Level range: 600 mm - 6,000 mm
Process pressure: 0 bar - 16 bar
Process temperature: -40 °C - 85 °C
... The level and environmental sensor based on the magnetostrictive measuring principle VISY-Stick is a fill level and environmental sensor which is especially suitable for use in monitoring ...
FAFNIR GmbH
Process temperature: -35 °C - 230 °C
... Filling level monitor for high temperature 180 °C /200 °C/ 230 °C with PEEK or PTFE tip Capacitive filling level monitors / filling level switches for the reliable monitoring of the maximum or minimum ...
EGE-Elektronik Spezial-Sensoren GmbH
Process temperature: -25 °C - 75 °C
... Capacitive filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids or bulk materials Compact design with rugged G3/4 thread resistant ...
EGE-Elektronik Spezial-Sensoren GmbH
Level range: 25 mm - 3,000 mm
Process temperature: -20 °C - 70 °C
... Contactless filling level measurement with ultrasound Switching points or analogue 25....3000 mm Threaded design Measures the exact level con tactless independent of the medium consistency Conventional ...
EGE-Elektronik Spezial-Sensoren GmbH
Level range: 0 m - 6 m
Process pressure: 0 bar - 50 bar
Process temperature: -30 °C - 150 °C
... • Measuring resolution 5 – 10 – 20 mm. • Potentiometric signal output (LC). 0-5 / 0-10V analog output (LCTV). • Built-in temperature sensors, on request. PT – PTC – NTC. ...
VAL.CO srl
Level range: 0 m - 5 m
Process pressure: 0 bar - 6 bar
Process temperature: -30 °C - 130 °C
... degree of reliability. • Measuring resolution 5 mm. • Potentiometric signal output (LC). • Built-in temperature sensors, on request. PT – PTC – NTC. ...
VAL.CO srl
Level range: 0 m - 6 m
Process pressure: 0 Pa - 4,000,000 Pa
Process temperature: -30 °C - 150 °C
... .78 N.31 – Fire section Potentiometric output (LC) APPROVED IN ACCORDANCE WITH SAFETY STANDARD AND FIRE PREVENTION Level controls designed to meet safety standard under the provisions of Circular 31.08.78 N: 31/MI.SA (78) 11 point ...
VAL.CO srl
Level range: 0 m - 300 m
Process temperature: -5 °C - 60 °C
... RS485: SDI-12, Modbus, SHWP) or analog output (4-20mA) Optional: Integrated temperature sensor (type DST 22) Robust, accurate and long-term stability: The DS (T) 22 fulfills the the requirements ...
Seba Hydrometrie GmbH & Co. KG
Level range: 0 m - 10 m
Process temperature: -20 °C - 60 °C
... Compact, robust measurement system for measurement of water level using the "bubble gauge" principle High accuracy (0.05% FS) and long-term stability through smart sensor drift compensation Measuring ranges: 0-10 m (standard), ...
Seba Hydrometrie GmbH & Co. KG
Level range: 0 m - 100 m
Process temperature: -20 °C - 80 °C
... the sensor to an existing mechanical registration level. Economical: With its float shaft, the Surfloat Sensor 4 provides an affordable alternative to a pressure sensor, a radar ...
Seba Hydrometrie GmbH & Co. KG
Level range: 0.3 m - 6 m
Process temperature: -40 °C - 85 °C
... of our new ultrasonic sensors for continuous level measurement without contact in liquids. Fast commissioning with its radio configuration using Avelour software that offers pre-assisted calibration. This ultrasonic ...
Level range: 35 cm - 600 cm
Process temperature: -40 °C - 85 °C
... DUT-E fuel level sensor is designed for precise measurement of fuel level and fuel volume in vehicle tanks, vessel tanks, also in storage cisterns, tank of diesel generators and boilers/burners. DUT-E ...
Level range: 70 cm - 600 cm
Process temperature: -40 °C - 85 °C
... detects new fuel type in fuel tank and adjusts measurements results. This feature allows to give fleet manager accurate data on level and volume of fuel in the tank, correctly detect tank refilling and fuel draining volumes. In addition, ...
Level range: 70 cm - 600 cm
Process temperature: -40 °C - 85 °C
... DUT-E GSM is a "2-in-1 solution", which combines features of fuel level sensor and telematics unit (GPS tracker) in one body. DUT-E GSM is a fuel level sensor with built-in GPS and GSM ...
Level range: 0 m - 35 m
Process temperature: -40 °C - 80 °C
... Afterwards the sensor remains in standby for a short time. Within this time the water reflects the pulses to the integrated evaluation system. The run time of the impulses corresponds directly to the distance to the current surface water ...
Level range: 8, 15, 35, 30 m
Process temperature: -40 °C - 80 °C
... Afterwards the sensor remains in standby for a short time. Within this time the water reflects the pulses to the integrated evaluation system. The run time of the impulses corresponds directly to the distance to the current surface water ...
Process temperature: -20 °C - 70 °C
... Capacitive level controls are widely used where it is necessary to control the level of substances both solid and liquid which may not be conductive. They are particularly used in silos for cereals, foodstuffs and the ...
Process temperature: -20 °C - 60 °C
... They work on the resistivity of liquids and sense the level via the electrodes placed in the conductive liquids. The presence of liquid between the electrode (or electrodes) and the metal surface of the container (or ...
Process temperature: -200 °C - 250 °C
... used to control the levels of hot materials such as liquids, oil, powder and plastic granules. They also sense solid metallic and non-metallic bodies positioned in areas of high temperature. The connecting cable between ...
Process pressure: 20 psi
... WLM- Sensor maintains the liquid in a container to a specified level without the use of electricity. Only a pressurized supply source is needed. Water is the typical application, but other liquids can be controlled ...
Level range: 100 mm - 20,000 mm
Process pressure: -1 bar - 40 bar
Process temperature: -25 °C - 80 °C
... The Guidense TDR100 is a guided wave radar (GWR) for continuous level measurement and point level detection in liquids and solids, with active analog and digital control output. Mechanical installation ...
Level range: 0 m - 100 m
... AQ IoT Data Logger + Level Sensor – IP68, Modular, Built for Remote Monitoring The AQ IoT Data Logger (IP68), when combined with the AQ Level Sensor, offers a durable and intelligent ...
... AQ Radar Sensor Kit – Precise Level Monitoring in Open Channels and Tanks The AQ IoT Data Logger (IP68) combined with the AQ Radar Sensor provides an efficient and autonomous solution for long-term level ...
... Range 10-180 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circleØ 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration ...
... Range 300-10 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circle Ø 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration ...
Level range: 4 m
Process pressure: 25 bar
Process temperature: 80 °C
... - Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C universal filters with GL connection and flow chamber LS - Connection: ø 12 mm - With 4 m electrical connecting cable - Material of ...
Level range: 4 m
Process pressure: 0 bar - 25 bar
Process temperature: 80 °C
... - Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C stainless steel universal filters with condensate drain and flow chamber LS25 - Connection: 1/4" male NPT thread - With 4 m electrical ...
Level range: 1.5 m
Process pressure: 11 bar
Process temperature: -20 °C - 50 °C
... non-conductive media. The new liquid alarm sensor type KS3 replaces the KS2. The KS3 is an adequate replacement for the KS2.Ex model. The former KS2 plastic enclosure has been replaced by a rugged aluminium case. Liquid alarm sensors ...
Level range: 4 m - 100 m
Process pressure: 0.4 bar - 25 bar
Process temperature: -20 °C - 70 °C
... or 0-10 V analog output Different level measuring between 4 meters and 100 meters IP68 protection class High quality Applications Seawater, saline water applications Grey water, waste water Wells Water ...
ATEK SENSOR TECHNOLOGIE
Level range: 0 m - 250 m
Process pressure: 0 bar - 25 bar
Process temperature: -5 °C - 80 °C
... Accuracy: ≤ ± 2.0 % FS Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA Materials: PVDF Customer benefits Chemical resistant level transmitter made of PVDF This transmitter has an excellent resistance to aggressive chemicals Optional ...
STS Sensor Technik Sirnach AG
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group