DN: 50 mm - 400 mm
Pressure: 240 psi
... Technical characteristics: body, bonnet: ductile iron EN-GJS-500-7 ball float: EPDM/alluminium gasket: EPDM bolts, washers: carbon steel/stainless steel A304 working pressure PN16 flanges drilled acc. PN10/16, starting from DN200 ...
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
... Design Check Valve with threaded connection and with a EPDM coated ball. Connection Thread ¼” … 3″, acc.to ISO 228-1 Mounting position Horizontal, cap above and vertical ...
Watergates GmbH & Co. KG
DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C
... SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit ...
MHA ZENTGRAF GmbH & Co. KG
Temperature: 5 °C - 100 °C
... Check valve allows gas and liquid to flow into only one direction and prevent another countercurrent flow valve. Check valve installs the Dry Pump discharge end, block ...
DN: 8 mm - 150 mm
Pressure: 150 psi - 235 psi
Temperature: 70 °F
... Hayward's TC True Union Check Valves are available in PVC, CPVC, and PP and seats are FPM or EPDM. They are all put together with lubricant that has no silicone. They feature 1/2 in. to 6 in. are Sure Block layout, seats ...
Pressure: 3 psi - 16 psi
... In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid pressure from the ...
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 200 °C
... sight glass Large optional lining materials Swing Check Valve design available Flange dimensions - DIN EN 558-10 Face to face dimensions - 5 mm lining, Available as Ball Check ...
DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C
... Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main ...
DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C
... Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90. ...
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -100 °F - 400 °F
... Spring-loaded, compact, stainless steel single ball check valve. 316 stainless steel check valve Spring-loaded single ball 2 lb. or 10 lb. cracking ...
JAECO Fluid Systems
DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... and closed repeatably. The valve parts are made from high-strength hardened steel whereby the valve seat is specially processed and the patented ball cup is made from a high-strength, hardened and polished ...
HYTORC-TECHNOLOGIES GMBH
DN: 40 mm - 600 mm
Pressure: 10, 16 bar
... STANDARDS OF MANUFACTURE EN 558 S48 DIN 3202 F6 FACE TO FACE EN 12334 CHECK VALVES IN DUCTIL IRON EN 1092-2 DRILLING FLANGES ISO 228-1 GAS THREADED MATERIALS BODY FIG.585-585A-586 – CAST IRON EN GJL-250 EN 1561 FIG.585GS-585AGS ...
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
Dicsa
DN: 25 mm - 200 mm
... Ball check valve (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Other pressure rates: * PN 16 * PN 25 * ...
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
... Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...
LOCKWOOD
DN: 0.5 in - 12 in
Pressure: 150 psi
... SIZE: 1/2＂～2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) CHECK VALVE TYPE: BALL/HALF BALL WORKING PRESSURE: ...
Xiamen Keheng Plastic Co., Ltd.
DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C
... Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according to Art. ...
VIR
DN: 0.5 in - 4 in
Temperature: -20 °C - 232 °C
... Ball check C) Swing check D)Lift check E)Wafer check Investment forging Working pressure: 150lb-2500lb WOG Materials: Forged steel ,Forged stainless steel,Forged low pressure ...
DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C
... Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic ...
DN: 32 mm - 300 mm
Pressure: 6 bar
Temperature: 40 °C
... acces and to ball, - silent and unfailing operation, - bonnet service position - on two spindels, - full open valve for fluid speed from 0,7 m/s, - perform conditions clearance for solid parts (EN 12050-4) ...
DN: 15 mm - 300 mm
Pressure: 1,000,000 Pa
Temperature: -14 °C - 90 °C
... CPVC Vertical Ball Check Valve Temperature: Ordinary Temperature Function: Nrvr Silence Sealing Form: Gland Packings Globe Valve Flow Direction: Unidirection/Reversing Standard: ...
Ningbo Baodi Plastic Valve Co., Ltd.
DN: 6 mm - 30 mm
Pressure: 0 bar - 350 bar
Temperature: -30 °C - 80 °C
... Single acting piloted check valves with guided conical poppet. Flow rate: from 1 to 60 l/min. Max working pressure 350 bar. Flangeable or in-line body mounting, with flangeable face or bolt, in steel or aluminum material. ...
DN: 40 mm - 400 mm
... ball check valve • flange connections according PN10/16 and A-150 • face to face dimension according DIN EN 558-1 serie 48, ANSI B16.10 • easy to install and maintenance free • horizontal and vertical ...
DN: 10 mm - 100 mm
Pressure: 12, 16, 25, 40, 10 bar
Temperature: -10 °C - 150 °C
... Full bore check valve, F/F threaded, Viton® seat suitable for application with not halogenated hydrocarbons and fuels (gasolines, kerosene...). ...
DN: 2 in - 24 in
DRAC ENGINYERS, S.L.
DN: 1.5 in - 42 in
... Bellow Seals Globe Valves – Y-Pattern, Standard & Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check ...
DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C
... ,two way,three way,mulity port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
DN: 0.125 in - 0.5 in
Aircomp by Stampotecnica
DN: 40 mm - 400 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 80 °C
... Ideally suited to be used particularly on the suction and discharge sides of pumps installed in lines containing high viscosity media,slurries. • Designed according to EN 1074-3 and pressure tested to EN 12266-1 • A minimum back pressure of 0,3 bar ...
Doruk Endustri Ltd.
Pressure: 45 bar
... Check valves and stop valves are designed for installation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants: R22, R134a, R404A, ...
CASTEL
DN: 0.375 in - 1.25 in
Pressure: 210 bar
... The CNT and DT Series, manufactured by HOF hydraulic, are check valves that feature an optional cracking pressure. These valves allocate a liquid or gas to run through it in only one path. Furthermore, ...
Temperature: -320 °F - 165 °F
... Application Inline check valves with metal seat option for cryogenic service or with soft seat option for leak free operation in gas service. Features • One directional flow indicated by arrow on body. • Large Cv for ...
Pressure: 160 bar - 400 bar
Temperature: 200 °C
... high pressure non return valve, both sides female thread, opening pressure 0,5 bar - 1,0 bar, material: 1.4571 ...
DN: 50 mm - 600 mm
Pressure: 16 bar
... Eurocheck valve ECV Construction - Non-return valve Body type - Wafer type End connection - ISO, PN 6 / PN 10 / PN 16 ASME, CL 150 Design pressure - 16 bar / 232 psi Nominal diameter - DN 50 / NPS 2 up ...
Pressure: 207 Pa
Temperature: -184 °C - 232 °C
... Ball check valves allow free flow in only one direction, prevent backflow, and are for applications where poppet style valves may not be suitable (such as media with contamination, viscous ...
DN: 15 mm - 200 mm
Pressure: 0.1 bar
... higher flow capacity, Atomac check valve type ARV/SG should be considered. Universal Application The Atomac check valve can be installed either vertically or horizontally dependent upon ...
DN: 20 mm - 150 mm
... quick-installment check valve Operating Principle Technical Parameter Installing Dimension Documents Downloads 1.Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...
DN: 50 mm - 500 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
... The valves in series 07 are ball check valves made of ductile iron, and are manufactured in accordance with the most severe product norms, and in conformity with the quality requirements ...
DN: 4 mm - 12 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 80 °C
... Areas of application : compressed air - working pressure : 1 ÷ 10 bar - working temperature : -10 ÷ 80°C Materials : - fitting’s body in nickel plated brass or acetalic resin - female BSP parallel or male BSP parallel outlets - oil-proof rubber ...
SENGA
the best suppliers