Ball check valves

DN: 50 mm - 500 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 70 °C

... Working position: Vertical, horizontal Features •very slight pressure drop •full bore •self cleaning •silent •horizontal and vertical instalation ...

DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C

... DESCRIPTION Uni-directional valve with exclusive double sealing system: a metal ball against the O-Ring ensures sealing at low pressure; at high pressure, the OR warps, stretches out, and the metal ball ...

Pressure: 3,000 psi

... cylinder port. The pressure on this valve port will shift the pilot spool opening the opposite check valve. This will allow oil to return through the opposite check valve. ...

DN: 0.375 in - 1 in

... Throttle And Check Valves 10 : Non-ISO Mounting 20 : ISO Mounting Valve Size 03 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-plate Mounting T : Threaded Connections Sériés Number ...

DN: 8 mm - 50 mm
Pressure: 20 bar - 420 bar
Temperature: -29 °C - 595 °C

... Forged gate valve Product type Switch type Product description Forging gate valve Model Z11/41H Size NPS 1/4”～2”(DN8～DN50) Operating temperature -29℃～595℃acc to material Operating ...

DN: 50 mm - 400 mm
Pressure: 240 psi

... Technical characteristics: body, bonnet: ductile iron EN-GJS-500-7 ball float: EPDM/alluminium gasket: EPDM bolts, washers: carbon steel/stainless steel A304 working pressure PN16 flanges drilled acc. PN10/16, starting from DN200 ...

Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

... Design Check Valve with threaded connection and with a EPDM coated ball. Connection Thread ¼” … 3″, acc.to ISO 228-1 Mounting position Horizontal, cap above and vertical ...

DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C

... SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit ...

Temperature: 5 °C - 100 °C

... Check valve allows gas and liquid to flow into only one direction and prevent another countercurrent flow valve. Check valve installs the Dry Pump discharge end, block ...

DN: 8 mm - 150 mm
Pressure: 150 psi - 235 psi
Temperature: 70 °F

... Hayward's TC True Union Check Valves are available in PVC, CPVC, and PP and seats are FPM or EPDM. They are all put together with lubricant that has no silicone. They feature 1/2 in. to 6 in. are Sure Block layout, seats ...

Pressure: 3 psi - 16 psi

... In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid pressure from the ...

DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 200 °C

... sight glass Large optional lining materials Swing Check Valve design available Flange dimensions - DIN EN 558-10 Face to face dimensions - 5 mm lining, Available as Ball Check ...

DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C

... Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main ...

DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C

... Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90. ...

DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -100 °F - 400 °F

... Spring-loaded, compact, stainless steel single ball check valve. 316 stainless steel check valve Spring-loaded single ball 2 lb. or 10 lb. cracking ...

DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C

... and closed repeatably. The valve parts are made from high-strength hardened steel whereby the valve seat is specially processed and the patented ball cup is made from a high-strength, hardened and polished ...

DN: 40 mm - 600 mm
Pressure: 10, 16 bar

... STANDARDS OF MANUFACTURE EN 558 S48 DIN 3202 F6 FACE TO FACE EN 12334 CHECK VALVES IN DUCTIL IRON EN 1092-2 DRILLING FLANGES ISO 228-1 GAS THREADED MATERIALS BODY FIG.585-585A-586 – CAST IRON EN GJL-250 EN 1561 FIG.585GS-585AGS ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min

The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.

DN: 25 mm - 200 mm

... Ball check valve (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Other pressure rates: * PN 16 * PN 25 * ...

DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

... Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

DN: 0.5 in - 12 in
Pressure: 150 psi

... SIZE: 1/2＂～2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) CHECK VALVE TYPE: BALL/HALF BALL WORKING PRESSURE: ...

DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C

... Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according to Art. ...

DN: 0.5 in - 4 in
Temperature: -20 °C - 232 °C

... Ball check C) Swing check D)Lift check E)Wafer check Investment forging Working pressure: 150lb-2500lb WOG Materials: Forged steel ,Forged stainless steel,Forged low pressure ...

DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C

... Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic ...

DN: 32 mm - 300 mm
Pressure: 6 bar
Temperature: 40 °C

... acces and to ball, - silent and unfailing operation, - bonnet service position - on two spindels, - full open valve for fluid speed from 0,7 m/s, - perform conditions clearance for solid parts (EN 12050-4) ...