{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Size: 4 mm
A range of expansion inserts suitable for use with most plastic materials, using either through or blind holes. Knurled outer diameter with expansion slots prevent rotation or loosening due to vibration and ensures consistent ...
... Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. STANDARD EXECUTION Nickel-plated brass boss with threaded pass-through hole.
HITSERT® 2 HITSERT® 2 thread inserts are specially designed for thermal installation. They are available in various versions with nut and bolt threads. Principle The HITSERT® 2 thread insert is heated ...
Size: 6.3 mm - 11.1 mm
Self-Tapping Inserts are available in Series 10 which is a thread forming insert for soft, flexible thermoplastics. Reduced thread profile and coarse pitch minimizes radial stress and potential hole wall ...
The Mubux is a press-in threaded insert developed by Specialinsert. It is mainly used for plastics. This product is made from brass material and its coating is constructed with natural State. It is cornes ...
Specialinsert s.r.l.
FamilyCrown-Nut Type of product Insert for Square Tube Receiving material Brass, Light Alloy, Steel Material production Steel Assembly Pressure Coating In Natural State, White Zinc Plated
Specialinsert s.r.l.
FamilyCrown-Nut Type of product Insert for Round Tube Receiving material Steel Material production Brass, Light Alloy, Steel Assembly Pressure Coating In Natural State, White Zinc Plated
Specialinsert s.r.l.
TRISERT® self-tapping inserts are used in threaded inserts. They can even be used in thermoplastic materials, such as glass fiber reinforced plastics (GRP) and thermoset plastics. The 3 cutting flutes ...
The Microbarb® press-fitting inserts feature a micro knurling property. They also make precise internal threads. These devices can be pressed fit and heat or ultrasonic installed. The inserts are ...
... case of modifications to the existing system. -Seals FPM -Material with media contact: Brass, dezincification resistant -Material without media contact: Brass -Temperature range -4 to 248 °F (-20 ...
Eisele Pneumatics GmbH & Co. KG
- Without shut-off - 1 Seal or 2 Seals - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range -20 to +120 °C - Working ...
Eisele Pneumatics GmbH & Co. KG
- With shut-off - 1 Seal or 2 Seals - Seals FPM - Material brass nickel-plated - Temperature range -20 to +120 °C - Working pressure range -0,8 to 16 bar - Suitable for vacuum
Eisele Pneumatics GmbH & Co. KG
FIXI
BRASS THREADED INSERTS FXTCB TYPE HEAT INSTALLATION
FIXI
Engrenages HPC has extended its already extensive range of steel and stainless-steel fasteners with a full range of brass screws, washers and nuts. In addition to not suffering from corrosion, they have the advantage ...
Brass insert. PA: Reinforced polyamide D1=Ext. dimension of the tube. D2=Int. dimension of the tube. * Max. static load. Available in different metrics and measures.
Size: 10 mm - 70 mm
... Tube Inserts in many different diameters and thread sizes as seen below, this ensures the best possible fit to your equipment or machinery. Why Choose Us For Heavy Duty Tube Inserts? Manufactured ...
Size: 30 mm - 50 mm
Our Round Heavy Duty Threaded Tube Inserts are made from a tough Nylon as standard and include a Nickle Plated Brass or Stainless Steel thread (both stocked). Heavy Duty inserts are an ...
Size: 30 mm - 60 mm
Every one of our Heavy Duty Square Threaded Tube Inserts is manufactured using a strong Nylon and comes with either a Nickel Plated Brass or Stainless Steel thread depending on your choice. Heavy Duty ...
Size: 34 mm - 62 mm
Material of pressed bush polyamide reinforced, black Material of threaded bush: brass, nickel-plated
... Types of Brass Inserts •Self Tapping Inserts •Brass Tappex Type Inserts •Press Lock Type Inserts •Cross Knurled Inserts •Brass ...
... of Brass Inserts including brass female inserts and brass male inserts for PPC Pipe Fittings, UPVC Pipe Fittings, CPR Pipe Fittings ...
Banc-Lok® are press-in expansion inserts ideal for use in hard thermosetting plastics. It provides minimum penetration of the sides of the hole without sacrificing pull-out resistance due to its diamond knurl pattern. Advantages ...
PSM International
... No insert spring back after installation Increased surface contact area with mating component giving greater resistance to a torque induced jack-out. Available in 3 ranges: High Strength Oversize, Thin Walled and ...
PSM International
Sonic-Lok® is designed for rapid installation into thermoplastics using heat or ultrasonic. It features opposed helical knurl bands to provide a combination of high torque and pull out resistance. Advantages : • Thin boss walls allows ...
PSM International
... various brass inserts as per custom design & specification, we have standard series of Threaded Inserts such as Straight Hole, Blind (Closed bottom), Collar Inserts, ...
Paani Precision Products LLP
Straight wall, thru threaded inserts, types IUTB and IUTC are designed for use in straight holes. Self-aligning lead-in of inserts provides for accurate alignment prior to installation.
... -performance seal between the plastic and the insert. Ultraseal pipe thread inserts provide the high-performance strength values of molded-in inserts while retaining all the economic ...
STANLEY Engineered Fastening
Size: 6 mm - 41.3 mm
... stabilisation of the LOKRING connection under mechanical loads. Supports calibration of coiled tube. IMPORTANT: Stabilisation inserts must not be used within an NRA adaptor or within the stainless steel tube of ...
Brass fixing PA 4 The brass fixing for thin board building materials Building materials Wooden board building materials Plastic boards Advantages The short brass fixing PA 4 only ...
The Self-tapping threaded insert JY-202 Series is manufactured by Shanghai Jingyang. The product is either made of unhardened steel, hardened steel or brass. The product can be utilized in various types ...
... the bottom of the tube and attach the mount. The glass-reinforced nylon body is molded around the threaded brass insert ensuring that the insert stays put in even the toughest conditions. ...
Size: 2 mm - 10 mm
TH inserts are recommended for thermoplastic applications. Their geometric shape and sharp pointed barbs ensure swift installation and complete flow of material to encapsulate the insert, providing ultimate ...
Harrison Silverdale
Size: 0.38 in - 5 in
Marangon Danilo & C produces brass inserts used in PE moulding with threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement ...
Marangon Danilo & C. S.r.l.
... use with or without locating pin Description Yardley Standardized Molded-In Inserts are designed for molding in plastics, rubber and ceramics. These threaded inserts feature patented designs for ...
Yardley Products
Please specify:
Help us improve:
remaining