DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
... for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting : from 1 to 6 bar ...
DN: 15 mm - 100 mm
Pressure: 20 bar
Temperature: -10 °C - 100 °C
... Body material Bronze Wedge material Brass PN (End) PN20 End BSP Female/Female Contact sealing EPDM Operating system Handwheel non rising stem ...
TECOFI
DN: 0.25 in - 4 in
Pressure: 16 bar
Temperature: -10 °C - 80 °C
... This equipment is used for various watering and water distribution purposes. Aside from being made from bronze, it has a rotating non-rising stem, PTFE packing, female BSP cylindric, and a single wedge disc. The temperature threshold ...
SFERACO
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -15 °C - 150 °C
... Connection: External thread according to ISO 228/1 Leakage rate: EN 1349 – Seat leakage VI G 1 (tight seal) Body: Bronze Rg-5 CC499K Valve/shaft: Brass CW614N / CrMo steel 1.4122 Cable gland seal: EPDM Servomotors: – ...
DN: 150 mm - 2,500 mm
Pressure: 10, 16, 25, 40 bar
... Butterfly valve suitable for pipelines and water treatment stations. Working temperature according to EN 1074. Easy handling due to double eccentricity and well matched gearboxes. Overlay welded and microfinished seat ...
DN: 0.5 mm - 2 mm
Pressure: 14, 32 bar
Temperature: 198, 100 °C
... The GV32B bronze in-line stop valves are designed for use with steam, water, oil or air applications. Rising stem. PTFE renewable plug. High quality PTFE steam seals. Saturated steam, condensate, water, oil, compressed ...
DN: 2 in - 48 in
... Also known as Soft sealing elastic seat type midline butterfly valves has the function of switching and regulating fluid. - Compared with traditional gate valves, globe valves and ball valves, ...
Athena Engineering S.r.l.
DN: 2 in - 20 in
Pressure: 25, 175, 16, 235, 10 bar
Temperature: 0 °C - 100 °C
... reducing valve, the basic valve body and the pressure regulator will automatically close to form a tight seal. If the optional check feature is selected, when the back pressure generated, the return fluid will enter ...
Taloar
DN: 50 mm - 1,200 mm
Pressure: 2 bar - 10 bar
... Uni and Bi-directional wafer-design knife gate valve. One or two pieces cast body. Provides high flow rates with low pressure drop. Various seat and packing materials available. Face-to-face dimension in accordance with Flapcon standard. ...
DN: 0.25 in - 2 in
Pressure: 0 psi - 125 psi
... Weight - 0.595 lb Seat - RTFE Construction Chromium plated ball RTFE seats and stuffing box ring Features Blow-out proof stem design Adjustable packing gland Specifications Vent downstream air in accordance ...
DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C
... DeZURIK Eccentric Plug Valves' design features include eccentric action and resilient plug facings assure lasting dead-tight shutoff. Clean interior design and straight-through flow allow high maximum flow capacity with minimum pressure ...
... Overview CRANE® bronze gate valves have stood up to commercial and industrial services for more than a century. ...
DN: 1.25 in - 4 in
Temperature: 100 °C
... 3-way high flowrate vacuum valve VACUUM/VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • Rapid vacuum interception and interruption • Remote ...
MAROS Engineering
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control and other control applications. The hydraulic control valve ...
DN: 20 mm - 50 mm
Pressure: 0 psi - 175 psi
Temperature: 0 °C - 80 °C
... BOOSTER-IT® WATER SYSTEM PUMP CONTROL VALVE- Designed for well water pumping systems, booster systems, and pump irrigation pumping systems. Valve body is cast from an unleaded bronze alloy with two 1/4" ...
DN: 8 mm - 100 mm
Pressure: 10, 25, 100 bar
Temperature: -220 °C - 200 °C
... Upstream vent hole for cavity relief in the closed position. PY4 CY: Stem extension avoids any stem freezing and allows easy valve operation. Approvals: PY4 CY design: EN1626 PY4 CY Fire Safe design: EN12567, ISO10497, API607 and ...
DN: 50 mm - 2,000 mm
Pressure: 16 bar
Temperature: -40 °C - 205 °C
... • Valve plate material: Ductile iron nylon coated, Ductile iron-zinc plated, AI bronze • Construction ISO5752 AP1609 GB12221 • Design standard:GB12238 • Inspection standard: 1) Density 1.1xPN 2) Body bearing ...
ROPO GmbH
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection - fixed - rolled ...
ZETKAMA Sp. z o.o.
... Nickel Aluminum Bronze Lug Butterfly Valve The general properties of Nickel Aluminum Bronze are good castability, high strength and outstanding corrosion resistance. Nickel Aluminum Bronze ...
DN: 50 mm - 400 mm
Pressure: 150 psi
... KNIFE GATE VALVE rising stem Technical characteristics: stem: rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder RAL5015 EPDM seat, bronze nut Nominal pressure PN10 (1.0Mpa), PN8, ...
DN: 2,000 mm
Pressure: 6 bar - 64 bar
... Hydraulic Gates, Penstocks and Stoplogs Generally used as guard valves in high-pressure outlet for dams, the gates operate in wide open or full closed position and therefore are suitable for all on/off applications. According to the ...
Pressure: 20.7, 41.2 bar
Temperature: 0 °C - 80 °C
... Size: 1 ¼” – 2 ½” Working Pressure: 20.7 bar (300psi) Max. Test Pressure: 41.2 bar (600psi) Wor king Temperature: 0-80°C (32-176°F) ...
DN: 40 mm - 1,000 mm
Pressure: 10, 16, 25 bar
... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558-1 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING FLANGES FEATURES FIG. 25-26-25A-26A-25/25-26/25 25R-26R-25AR-26AR 25P-26P-25AP-26AP ...
ACMO S.p.A.
DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C
... ACTING WITHOUT TOOLS Description Indumart Series PVS100 Pressure Actuated Angle Seat Valves are ideal for on/off flow control of most fluids compatible with bronze or stainless steel. Tight shutoff is provided by PTFE ...
the best suppliers