Bronze valves

Temperature: -10 °C - 130 °C
Pressure: 25 bar
DN: 15 mm - 50 mm

... the bronze balancing valves must be opened completely to ensure the valves are fitted properly at the pipeline. To obtain maximum performance from the valves, the body ...

Temperature: -30 °C - 200 °C
Pressure: 16 bar - 40 bar
DN: 8 mm - 80 mm

... Material: Stainless steel 1.4408 DN 8 to DN 80, PN 40 Bronze 5 (Rg 5) DN 15 to DN 50, PN 16 Brass DN 65 to DN 80, PN 16 •Temperature: Media temperature: -30 °C to +170 °C optionally ...

Temperature: -30 °C - 200 °C
Pressure: 16 bar
DN: 15 mm - 40 mm

Pneumatic actuated 3-way valve for high cycling applications made of bronze. •Size: DN 15 - DN 40 •Pressure: PN 16 •Material: Body: Bronze RG5 •Temperature: Media temperature: ...

Temperature: -30 °C - 200 °C
Pressure: 16 bar
DN: 15 mm - 40 mm

Motor valve for on / off and control operation made of bronze. •Size: DN 15 - DN 40 •Material: Body: Bronze RG5 •Temperature: -30 °C to +170 °C optionally up to +200 °C Connection: Whitworth ...

Temperature: -10 °C - 260 °C
Pressure: 25 bar
DN: 0.5 in - 2 in

Bronze bodied globe stop valves in sizes to suit your application. - Robust - Safe - Accurate - Low cost of ownership

Temperature: -40 °C - 180 °C
Pressure: 0 bar - 40 bar
Flow rate: 0 m³/s - 0 m³/s

- Connection 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" - G thread or NPT thread - Pressure range 0 ... 40 bar - Valve function 2/2 Normally Closed (NC) - Use with slightly contaminated media also possible - Use for steam ...

Temperature: -30 °C - 180 °C

... angle seat valve for use in demanding industrial applications. The valve can operate at very high medium temperatures and viscosities, and is insensitive to dirt particles in the medium; thus, it is often ...

Temperature: 5 °C - 48 °C
Pressure: 0 Pa - 689,475.7 Pa
DN: 0.025 in

The F-2822 Series Metal Needle Valves has a fine adjustment to give accuracy in the calibration. It is intended for instrumentation and industrial requisitions. The needle valves are movable from ...

Temperature: -10 °C - 80 °C
Pressure: 16 bar
DN: 0.25 in - 4 in

This equipment is used for various watering and water distribution purposes. Aside from being made from bronze, it has a rotating non-rising stem, PTFE packing, female BSP cylindric, and a single wedge disc. The temperature ...

Temperature: -10 °C - 110 °C
Pressure: 16, 10 bar
DN: 0.375 in - 4 in

This product can be used for common fluids. It can cope up with a minimum temperature of -10°C, a maximum temperature of + 110°C, and a maximum pressure from 16 bars up to DN 2 and 10 bars over. This is an easy handling material because ...

Temperature: -10 °C - 110 °C
Pressure: 16 bar
DN: 0.25 in - 2 in

This valve contains a bronze body and a PTFE or brass disc seal. It operates with common fluids of 2na group with temperatures that range from -10°c up to 110°c. This unit also has the ...

Temperature: 70 °C
Pressure: 10 bar
DN: 40 mm - 250 mm

Design features: O-ring spindle’s gaskets - “DRY THREAD” - replaceable under pressure. Spindle with rolled thread and bearing. Wedge with replaceable spindle nut. Drain plug - on request. Marine execution for hot seawater.

Pressure: 0 bar - 0.8 bar
DN: 200, 150, 100, 80, 50 mm

HD deluge valve is a quick opening, differential diaphragm type valve. Deluge valve is used to control water flow in Deluge, Pre-Action as well as Foam systems. The valve ...

Pressure: 1.4 bar - 17.5 bar
DN: 2, 3, 4, 6, 8 in

HD deluge valve H5 is a special deluge valve, designed and developed for use with sea water and/or applications in corrosive environments. Model H5 deluge valve is UL Listed. Description •Deluge ...

Pressure: 0 bar - 17.5 bar

... Automatic Ball Drip Valve is used with ETW-D, NTW, ETD-D and NTD trims of all models of Deluge Valves. • Bronze Construction • Approvals: Part of UL Listed Deluge Valve ...

Temperature: -29 °C - 620 °C
DN: 80 mm - 600 mm

We recommend the highly versatile Hopkinsons® Flexi Wedge Design as gate valve which is designed for containment isolation duties. Overview Designed for containment isolation duties Bolted bonnet (seal weld ...

Temperature: 1 °C - 110 °C
Pressure: 16 bar
DN: 10 mm - 40 mm

... port valves with threaded connections for the control of terminal units, chilled ceilings or heating zones. Suitable media: Water (to VDI 2035), water with anti-freeze. Additional info V..P45.. valves ...

Temperature: 0 °C - 90 °C
Pressure: 10 bar
DN: 15 mm - 25 mm

... operation interruptions. A lack of use is recognised, so that a need-​driven water exchange can take place. Easytop extraction valve suitable for the extraction of potable water samples in acc. with DIN EN ISO 19458. Areas ...

Temperature: -20 °C - 60 °C
Pressure: 300,000 Pa - 1,000,000 Pa
DN: 11, 14, 18 mm

Angle Seat Valve (2 Way Valve)/Air Operated Type VXB ・For steam (Can be used with air and water) ・Low pressure loss due to angle seat structure ・Reduced leakage with rubber seal ・Long service life: ...

Pressure: 400,000 Pa - 1,600,000 Pa
DN: 11 mm - 18 mm

Universal Valves for General Use VXB •Angle seat valve, air operated type •Applicable fluid: steam, water and air •Flow rates up to 108 l/min. Orifice diameter: 11 to 18 mm •Port size: 3/8" to ...

Temperature: 14 °F - 356 °F
DN: 0.5 in - 2 in

... selection of Bronze NPT angle seat valves constitutes the SAV-BT series from Dwyer. The valve types from this product range include pneumatic, externally piloted angle seat valves, ...

Temperature: -10 °C - 184 °C
Pressure: 0 bar - 16 bar
DN: 15 mm

... range of options & accessories Proportional option available Available for food contact applications Various valve body connections Respect the environment /ROHS material.

Temperature: -10 °C - 185 °C
Pressure: 145, 232 psi

The externally piloted angle seat valve is operated with a single or double–acting piston actuator. The actuator is available in two different materials, depending on the ambient temperature. High flow rates are attained ...

Temperature: 50 °C
Pressure: 10 bar
DN: 0.5 in - 2 in

Industrial float valve with die casted body in brass or bronze. Guided sutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level ...

Temperature: -10 °C - 100 °C
Pressure: 20 bar
DN: 15 mm - 100 mm

Body material Bronze Wedge material Brass PN (End) PN20 End BSP Female/Female Contact sealing EPDM Operating system Handwheel non rising stem

DN: 0.5 in - 2 in

Press, 2-Piece, Full Port, Bronze Ball Valve, 250 CWP, Sizes: 1/2" to 2" (DN 15 to DN 50).

Temperature: -10 °C - 180 °C
Pressure: 25 bar
DN: 0.5 in - 2 in

Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Body material: (CC491K EN 1982: 2000) Bonnet material: (CW617N EN 12165: 1999) Seal material: PTFE

Double-offset flanged butterfly valve (resilient-seated) with albronze coating for high temperatures of up to 150° to 200° C. Long service life, as the medium does not come into contact with the bearing, and due to the ...

Pressure: 41.4 bar
DN: 0.25 in - 4 in

2-Piece, Standard Port, Bronze Ball Valves Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full ...

Temperature: 358, 550 °F
Pressure: 150, 300 psi

... control four-V port globe valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine tune the blowdown flow ...

Pressure: 41.4 bar

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 psi. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with ...