CAN Bus I/O modules

The QuantumX MX471 CAN bus module allows the simultaneous integration of up to four CAN networks into the QuantumX data acquisition system and can be expanded as required. The module, combined with analog measurement modules, is ideally ...

The KeConnect communication modules enable customized communication to a wide range of communication partners through back-to-back modules and plug-in cards. Simple wiring is ensured through standard plugs. Support of a wide range ...

The CAN-CBX-DIO8 Model is a CANopen® Module with InRailBus. It is built with 8 digital I/Os, 24 V input voltage, 24 V output voltage, 1 A maximum output current, and DIN-EN carrier rail mounting. The system also includes easy control ...

The esd CAN-CBX-AI420 CANopen® module features InRailBus technology, 4 analog Sigma-Delta A/D converter inputs, 20 bit resolution, input voltage of ±10 V, 3-lead connection cabinet wiring offering easy control, isolated analog inputs, ...

The CAN-CBX-AI814, manufactured by Esd® , is an 8 electrical confined analog input module for CANopen® with InRailBus . It features a 14 bit resolution, with an input that ranges from ±10.24 V and one at a time channels sample rate of ...

MO 691.H4X Power I/O Controller with CAN Bus Features: - USB2CAN Interface for Configuring Device - Up to 7 Analog Inputs - Up to 7 Current Inputs - Up to 7 Resistive Inputs - Up to 4 Frequency Inputs - Up to 8 Digital Inputs - ...

MO 690.HCX FET Extension Features: - 6 FET Outputs (High Side) (10 A/ch) Casting Material: GF 30 % Polyamid Supply Voltage: 12 or 24 VDC Operating Temperature: -40°C ... +80°C Connector: 24 Pin Connector

MO 699 H2X POWER I/O User Configurable or Custom Software USB to CAN interface for device configuration Software selectable inputs Up to 2 analog inputs Up to 2 frequency/PWM/digital inputs Up to 2 resistive inputs Up to 2 current ...

With the ESX-MBC, we present a new CAN-J1939 module especially for the agricultural and construction machine sector, to control electric motors and actuators in a performance range of up to 200 W. It provides four fast PWM half bridges ...

The ESX-3IOS is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS and J1939. The ESX-3IOS ...

Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX-IOX fulfils the safety ...

I/O slave module with 16 analogue inputs 16 analogue inputs for processing analogue standard signals (current, voltage, temperature, resistance) Robust design for harsh environments Ideal for use in shipbuilding thanks to approvals ...

I/O module with 24 digital, 8 universal inputs and outputs Robust design for harsh environments Can be used flexibly thanks to signal boards that can be integrated Ideal for use in shipbuilding thanks to approvals from classification societies

Robust CPU I/O master module with powerful 32-bit processor Controls up to 16 I/O slave modules Robust design for harsh environments (shipbuilding approvals) Integrated web server for user-friendly configuration and web-based visualisation IEC ...

General characteristics 2 inputs (electrically isolated from the backplane bus) 24 VDC input voltage Can accommodate two-wire proximity sensors 2 outputs (electrically isolated from the backplane bus) 24 VDC output voltage Output ...

General characteristics 4 inputs (electrically isolated from the backplane bus) 24 VDC input voltage Can accommodate two-wire proximity sensors 4 outputs (electrically isolated from the backplane bus) 24 VDC output voltage Output ...

General characteristics 8 inputs (electrically isolated from the backplane bus) 24 VDC input voltage Can accommodate two-wire proximity sensors 8 outputs (electrically isolated from the backplane bus) 24 VDC output voltage Output ...

The high-performance internal bus perfectly synchronises the modules at the interpolation cycle rate of the motion control. This is an important requirement for many machine applications. The E°LBM I/O modules are designed to be used ...

TECHNICAL FEATURES > Inputs: 4 PNP, 24V 20mA > Outputs: 8 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical ...

TECHNICAL FEATURES > Inputs: 12 PNP, 24V 20mA > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 2V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, ...

TECHNICAL FEATURES > Outputs: 12 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical Insulation: the inputs, ...

The MX4 expansion module provides temperature and frequency input capability to the C4/CPC4 generation of FW Murphy Controllers using CAN proprietary communication. Serial RS-232 or RS-485 ports also provide other communication methods ...

Module for the de-centralised collection of measured values from 8 temperature, and analogue values respectively via CAN bus. Measured values are cyclically sent via CAN bus and read by all connected controllers Allocation ...

Module with 16 digital in- / outputs via CAN bus Analogue input for heating current reading via external current transformers (three phases) Data is cyclically sent via CAN bus and read by all connected controllers Allocation ...

Module with 8 analogue inputs via CAN bus Data is cyclically sent via CAN bus and read by all connected controllers For each 4 inputs switchable between thermocouple TC and resistance thermometer Pt100 Status LEDs for ...

New Modular I/O solution from Horner APG! Complementing our existing I/O systems (Snap-On, Modbus, CAN) we've added yet another way to handle your Input/Output signals. SmartRail combines the compactness and clean look of Sliced I/O ...

SmartStix I/O is a terminal-block style I/O that connects to CsCAN, Profibus or Devicenet Networks. DIN-rail Mounted, with Removable Terminal Strip - SmartStix I/O is extremely compact, providing 16 and 32 point digital I/O in a package ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

If you are looking for an item that is able to provide extra output and input capabilities for devices such as the relays in the 650 family of products manufactured by GE Multilin, this is a product worth exploring further. The input/output ...

Two I/O systems with IP20 protection: IP20 modular and IP20 compact. The I/O system IP20 is available in two different versions: Modular I/O system IP20 For complex automation applications, we can provide you with a full-scope I/O ...

Expand the capabilities of your vehicle control system with our CAN-based Input/Output modules. These stackable microcontroller add-ons integrate new control functions smoothly and effectively. You can use our I/O modules as the building ...

- For P50 - 16 digital inputs - 16 digital 500 mA outputs, PNP (short circuit proofed) or 16 x 50 mA PNP/push-pull (short-circuit proofed) - Diagnosis LED overcurrent indication - Connection over the PLC over patch ...

The CAN bus node JX3-BN-CAN is for setting up remote I/O stations consisting of JX3 expansion modules and for connecting these modules to JetControl 24x and JetControl -647 controllers. It also serves as power supply module for up to ...

The Trio CAN16 Output module offers a compact DIN rail mounted output expansion capability for all Trio Motion Coordinators. Up to 16 P317 modules may be connected to the CAN network which may be up to 100m long. This provides 256 distributed ...

Compact CAN slave I / O module 8 analog inputs: ±10 V, ±1 V, Pt100, Pt1000, 0 (4) .. 20 mA 4 analog outputs ±10 V, either ±10 V, 0 (4) .. 20 mA configurable 16 digital inputs 16 digital inputs or outputs (can be configured ...

Universal I/O gateway for CAN and CANopen systems The CANio 250 enables the easy and quick connection of digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles.

CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling ...

XMC Form Factor PCIe Mini Card Carrier Board Up to two dual-redundant channels of MIL-STD-1553 Supports up to three PCIe Mini Cards Up to four CAN bus 2.0 channels Conduction- or air-cooled Supports two full-height PCIe Mini Card modules ...

SCE remote I/O module (CAN BUS and Ethernet) make the user able to have a totally action flexibility choosing I/O type and number depending on the application. Is possible to have 8I/8O modules controlled by a CPU unit module able to ...