EtherCAT I/O modules

The QuantumX MX471 CAN bus module allows the simultaneous integration of up to four CAN networks into the QuantumX data acquisition system and can be expanded as required. The module, combined with analog measurement modules, is ideally ...

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors and actors.

Outstanding performance, low costs, flexible topology and easy handling: These are the advantages of the industrial Ethernet technology EtherCAT. EtherCAT provides full flexibility: from free topology selection to the possibility of connecting ...

- Suitable for EtherCAT networks - 8-ch, 16-bit analog input channels with 2,500 VDC isolation - ±275 V high common-mode voltage range - Quick removable European type connector - Supports EtherCAT Distributed Clock ...

- Suitable for EtherCAT networks - 16-ch digital input and 16-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) - ...

- Suitable for EtherCAT networks - 32-ch digital input and 32-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) - ...

The IM 270/W is a cost- and space-saving compact module. It combines the typical I/O design for plastic injection molding machines in one module and offers functions for changeover point detection. In addition to application in the plastics ...

Kuhnke's FIO is a system of I/O modules for interconnecting the process signals in an EtherCAT network. It consists of the bus coupler and a range of I/O modules. The bus coupler converts the physical transfer technology (twisted pair) ...

The Kuhnke FIO relay module from Kendrion has 8 relays with separated contacts. The relay contact is available for voltages up to 24 V AC or DC and can be used universally for switching devices requiring mains power. The relay output ...

The Kuhnke FIO is a Bus Terminal EtherCAT® designed to connect the operation signals within the EtherCAT network. It comprises of different I/O modules and a bus coupler. The Kuhnke FIO bus coupler changes the transmission physics from ...

The ECX DIO8 EtherCAT Digital Input-Output Module from ESD is engineered with 8 digital I/O's which are rated at 24 V. The unit may be powered through the use of an InRailBus or a separate power feed that is coursed through a Combicon ...

A new modular and compact solution is now available in order to expand the on-board I/Os of the controller. It’s based on industrial fieldbus. Its architecture avoids the use of the power supply modules and end modules, making the wiring ...

The input and output signals can either be wired centrally to the control unit or locally to the fieldbus couplers. As required, terminals can optionally be arranged side-by-side in a modular and scalable way on bus couplers (CANopen ...

With EtherCAT P, Beckhoff combines communication and power in a single 4-wire standard Ethernet cable. With this ground-breaking solution, the direct supply of both the EtherCAT P slaves and the connected sensors and actuators with two ...

Safety in the system does not begin with the drives first, but at the control level. With the expansion of the controller software to include the Safety Controller c250-S a complete automation solution is provided for safety engineering ...

EtherCAT ® Digital I/O Modules Powerful Digital and Analog I/O Modules for EtherCAT® Network Up to 32 Inputs and 32 Outputs Compact and cost effective Easy to use The IOMPS is a line of EtherCAT® digital and analog ...

Flexible I/O Module for EtherCAT as board-level product or with rugged aluminum case The EtherCAT I/O Module "ETCio 100" enables the quick and easy connection of analog and digital input and output signals to EtherCAT systems – whether ...

EtherCAT network adapter EtherCAT slave 2 x Ethernet 10/100Mbps Up to 63 expansion modules 128 bytes/slice 10pt removable terminal block The G series distributed IOs provide you with supreme field and bus connectivity for smart integrated ...

Softlink iModule EtherCAT 16DI/16DO Module (MOSFET) iModule series integrated bus I/O combine communication interface, power modules, I/O module design into a highly integrated single module with compact structure and high cost performance, ...

DESCRIPTION Ethercat node module Ethercat node module with 2 encoder readings 16 Optoinsulated digital input module 16 Static 2A digital output module 16 Relay digital output module 4 Analog output module 8 Analog input 16 bit module

Power your industrial automation solutions for Industry 4.0 connectivity with the most versatile multiprotocol I/O modules on the market, supporting PROFINET, EtherNet/IP and EtherCAT. Choose just one I/O module to meet your operation’s ...

With an IP65 rating and up to 2A through each of the 18 outputs, the EtherCAT® I/O Box is suitable for almost all applications. Inbuilt diagnostics detect broken cables, short circuits and overcurrent’s quickly with onboard diagnostic ...

The super compact product is a module Eor S with an EtherCAT remote CANopen and Modbus RTU by SERAD can wire quickly. It has 24 inputs, 16 outputs with static ou relay with many possible options. It has LEDs capable of diagnosing, can ...

The EtherCAT Couplers from the EK18xx series combine the functionalities of the EK1100 EtherCAT Coupler with standard digital I/Os in one housing. This results in a compact design that is especially suitable for applications with a low ...

Specified CPU increasing Ethernet package efficiency• Distance between stations up to 100m (100BASE-TX) • Network topologies supported line, tree, ring, star,• or any combination thereof• Support daisy chain connection• Models ...